上海金畔生物为vp-scientific一级经销商，vp-scientific与科学家共同设计和开发用于生物，化学和材料研究的新型创新工具，包括基础研究和制药以及工业应用。无论是进行纳升转移，保持悬浮微粒，在微孔板中混合粘稠溶液，分离磁珠，加热微孔板，或抽吸或分配，vp-scientific都将解决您的应用问题。
vp-scientific 2018年产品：
|
货号 |
品名 |
品牌 |
|
VP 531Q-L |
Hydrophilic Coated Aluminum Reservoir 127.7mm Long 85.5mm Wide With 19mm Deep Cavity And Stands 32mm Tall Overall. Contains 2 Large Chambers. Price/Each |
vp-scientific |
|
VP 531Q-6AL |
Hydrophilic Coated Aluminum Reservoir 127.7mm Long 85.5mm Wide With 19mm Deep Cavity And Stands 32mm Tall Overall. Contains 4 Chambers (Columns 1-6, 7-12, 13-18, 19-24) with 384 dimpled bottom pattern. Price/Each |
vp-scientific |
|
VP 531R-1AL |
HYDROPHILIC COATED ALUMINUM RESERVOIR 127.7mm LONG 85.5mm WIDE WITH 19mm DEEP CAVITY AND STANDS 32mm TALL OVERALL, 3.2mm DIMPLED PATTERN IN BOTTOM ON 4.5mm CENTERS, CONTROL COMPARTMENT IN I23 TO P24 WITH 0.7mm THICK DIVIDING WALL. ALSO 2 LOCATING HOLES IN |
vp-scientific |
|
VP 531R-2AL |
HYDROPHILIC ALUMINUM RESERVOIR 127.7mm LONG 85.5mm WIDE WITH 19mm DEEP CAVITY AND STANDS 32mm TALL OVERALL, 3.2mm DIMPLED PATTERN IN BOTTOM ON 4.5mm CENTERS, CONTROL COMPARTMENTS IN I23 TO L24 AND M23 TO P24 WITH 0.7mm THICK DIVIDING WALLS WITH 2 LOCATING |
vp-scientific |
|
VP 531S-AL |
REAGENT RESERVOIR WITH 1 LARGE CENTRAL 20 WELL WIDE SECTION IN COLUMNS 3-22, AND ROWS A-P AND 8 CONTROL SECTIONS ON EACH SIDE IN COLUMNS 1-2, AND 23-24 ROWS AB, CD, EF, GH, IJ, KL, MN, OP. CHAMBER DEPTH – 23.4 mm, DIVIDING WALL THICKNESS = 0.70 MM, BOTTOM |
vp-scientific |
|
VP 531T-AL |
Hydrophilic Coated Aluminum Reagent Reservoir With 384 Dimpled Depressions And 6 Control Chambers. Chamber Depth = 2.54 Cm. Dividing Walls = 0.7 Mm Thick. Price Each. |
vp-scientific |
|
VP 531U-AL |
Hydrophilic Coated Aluminum Reagent Reservoir 10 mm Deep With A Flat Bottom With 5 Chambers Each Separated By A 6 mm Wide Wall. Overall Height Of The Reservoir Is 15 mm By 127.76 mm Long And 85.48 mm Wide. Price Each. |
vp-scientific |
|
VP 532-AL |
REAGENT RESERVOIR WITH 1536 – 1.5mm DIAMETER DIMPLED DEPRESSIONS, MADE WITH HYDROPHILIC COATED ALUMINUM, RESERVOIR DEPTH = 5mm, 127.76mm LONG, 85.48mm WIDE, 10mm TALL, THICK WALLS, ROUNDED INSIDE CORNERS TO DIMPLES |
vp-scientific |
|
VP 532-ALA |
REAGENT RESERVOIR WITH 1536 – 1.5mm DIAMETER DIMPLED DEPRESSIONS, MADE WITH HYDROPHILIC COATED ALUMINUM, RESERVOIR DEPTH = 5mm, 127.76mm LONG, 85.48mm WIDE, 10mm TALL, THICK WALLS, ROUNDED INSIDE CORNERS TO DIMPLES, 8 CONTROL WELLS AT EACH EDGE |
vp-scientific |
|
VP 532-ALB |
VP 532-ALB REAGENT RESERVOIR WITH 1536 – 1.5mm DIAMETER DIMPLED DEPRESSIONS, MADE WITH HYDROPHILIC COATED ALUMINUM, RESERVOIR DEPTH = 10mm, 127.76mm LONG, 85.48mm WIDE, 15mm TALL, THICK WALLS, ROUNDED INSIDE CORNERS TO DIMPLES, 4 CONTROL WELL IN COLUMNS 1 |
vp-scientific |
|
VP 533-AL |
DEERAC FLUIDICS REAGENT RESERVOIR, MADE WITH HYDROPHILIC COATED ALUMINUM, EACH |
vp-scientific |
|
VP 534-ALL |
V groove reagent reservoir conforms to SBS standard dimensions of 127.7 mm long 85.5 mm wide and with a 13.5 mm deep cavity and stands 15 mm tall. |
vp-scientific |
|
VP 535 |
Bird feeder style refilling reagent reservoir conforms to SBS standard dimensions and can be used with different bottle types and sizes. |
vp-scientific |
|
VP 540-1 |
SINGLE POLYPROPYLENE WASH RESERVOIR WITH SLOTS FOR 11 BAFFLES, 127.76mm LONG, 85.48mm WIDE, 32mm TALL, 23mm DEEP, X WALL THICKNESS 7.1 MM, Y WALL THICKNESS 10.3mm, GUIDE PINS PROTRUDE 1.5mm, EACH |
vp-scientific |
|
VP 540A |
BLOTTING MEDIA SUPPORT FOR VP 540 WITH 96 HOLES |
vp-scientific |
|
VP 540A2 |
SUPPORT STRUCTURE FOR VP 540AC ON STIR STIX REMOVER |
vp-scientific |
|
VP 540AC |
96 HOLE LINT FREE BLOTTING MEDIA, 10/PKG, FITS ON VP 540A SUPPORT |
vp-scientific |
|
VP 540B1 |
384 Hole Blotting Media Support With Alignment Holes For 384 Fountain Reservoir (VP 546) Constructed From 0.031″ Thick G10 |
vp-scientific |
|
VP 540B2 |
384 Hole Blotting Media Support With Alignment Holes For VP 549 Wash Reservoir Series And Guides For Blotting Media, Constructed From G10 |
vp-scientific |
|
VP 540BC |
384 HOLE LINT FREE BLOTTING MEDIA, 10/PKG, FITS ON VP 540B1 SUPPORT |
vp-scientific |
|
VP 540BC-1 |
Blotting Paper, lint free, 384 holes, fits on VP 540B2 Blotting Paper Support for VP 549 series Spillway Wash Reservoirs, 10/pkg |
vp-scientific |
|
VP 540C-12 |
LINT FREE BLOTTING PAPER WITH 12 FLAPS AND TABS, 105 mm X 140 mm X 0.4mm |
vp-scientific |
|
VP 540C-24 |
LINT FREE BLOTTING PAPER WITH 24 FLAPS AND TABS, 105 mm X 140 mm X 0.4mm |
vp-scientific |
|
VP 540D |
LINT FREE BLOTTING MEDIA, CUT TO FIT INTO AN OMNI TRAY, 10/PKG |
vp-scientific |
|
VP 540D-100 |
LINT FREE BLOTTING MEDIA, CUT TO FIT INTO AN OMNI TRAY, 100/PKG |
vp-scientific |
|
VP 540DB |
HEAVY DUTY BLOTTING SYSTEM, SUPER ABSORBENT PAD WITH LINT-FREE BLOTTING MEDIA IN AN OMNI TRAY, 10/PKG |
vp-scientific |
|
VP 540DB-100 |
HEAVY DUTY BLOTTING SYSTEM, SUPER ABSORBENT PAD WITH LINT-FREE BLOTTING MEDIA IN AN OMNI TRAY, 10 PACKAGES OF 10 |
vp-scientific |
|
VP 540DB.4 |
HEAVY DUTY BLOTTING SYSTEM, SUPER ABSORBENT PAD WITH LINT-FREE BLOTTING MEDIA IN AN OMNI TRAY, 4/PKG |
vp-scientific |
|
VP 540DB.6 |
HEAVY DUTY BLOTTING SYSTEM, SUPER ABSORBENT PAD WITH LINT-FREE BLOTTING MEDIA IN AN OMNI TRAY, 6/PKG |
vp-scientific |
|
VP 540DB1 |
SUPER ABSORBENT POLYPROPYLENE PAD CUT TO FIT IN AN OMNI TRAY, PACKAGE OF 10 |
vp-scientific |
|
VP 540DB1-100 |
SUPER ABSORBENT POLYPROPYLENE PAD CUT TO FIT IN AN OMNI TRAY, PACKAGE OF 100 |
vp-scientific |
|
VP 540DB2 |
Super Absorbent Polypropylene Pad, 115mm x 160mm, 10/pkg |
vp-scientific |
|
VP 540DB2-100 |
Super Absorbent Polypropylene Pad, 115mm x 160mm, 100/pkg |
vp-scientific |
|
VP 540F |
G10 BAFFLES FOR VP 540PCB RESERVOIR, SET OF 13 |
vp-scientific |
|
VP 540F-1 |
G10 BAFFLES FOR VP 540-1 RESERVOIRS, 73.6mm WIDE, 22.7mm TALL, SET OF 11, |
vp-scientific |
|
VP 540L |
SINGLE POLYPROPYLENE WASH RESERVOIR WITH SLOTS FOR 7 VP 540LF BAFFLES |
vp-scientific |
|
VP 540L-1536 |
SINGLE NI-LUBE COATED ALUMINUM WASH RESERVOIR WITH SLOTS FOR 3 VP 540LF-1536 BAFFLES |
vp-scientific |
|
VP 540L-PTFE |
SINGLE PTFE WASH RESERVOIR WITH SLOTS FOR 7 VP 540LF-PTFE BAFFLES |
vp-scientific |
|
VP 540LF |
G10 BAFFLES FOR VP 540L RESERVOIRS, 25mm TALL, SET OF 7 |
vp-scientific |
|
VP 540LF-1536 |
NI-LUBE COATED ALUMINUM BAFFLES FOR VP 540L-1536 RESERVOIR, SET OF 3 |
vp-scientific |
|
VP 540LF-PTFE |
ANODIZED ALUMINUM – PTFE COATED BAFFLES FOR VP 540L-PTFE RESERVOIRS, 25mm TALL, SET OF 7 |
vp-scientific |
|
VP 540M |
ADAPTOR FOR MULTIMEK PIPETTE TIP LOADER/PIPETTE WASH STATION, ALIGNS TO TWO PINS ON DECK AND HOLDS VP 540, VP 542 OR MICROPLATE |
vp-scientific |
|
VP 540PCB |
SINGLE PTFE WASH RESERVOIR WITH SLOTS FOR 13 BAFFLES, 2.54cm DEEP, EACH |
vp-scientific |
|
VP 540S |
POLYPROPYLENE RESERVOIR HOLDING VP 426 SCRUB PAD FOR PIN CLEANING. SBS FEATURE ON THE BOTTOM FOR DECK PLACEMENT, EACH. |
vp-scientific |
|
VP 540T |
SINGLE POLYPROPYLENE WASH RESERVOIR WITH SLOTS FOR 13 BAFFLES AND A FILL AND DRAIN NIPPLE, EACH |
vp-scientific |
|
VP 541 |
DUAL INTERDIGITATED WASH CHAMBER RESERVOIR SYSTEM |
vp-scientific |
|
VP 541T |
DUAL INTERDIGITATED WASH CHAMBER RESERVOIR SYSTEM WITH FILL AND DRAIN |
vp-scientific |
|
VP 542 |
LOW PROFILE POLYPROPYLENE WASH RESERVOIR WITH SLOTS FOR 13 BAFFLES, 1.5cm DEEP, EACH |
vp-scientific |
|
VP 542D |
VP 542 WITH 384 DIMPLED BOTTOM, AND SLOTS FOR13 BAFFLES, |
vp-scientific |
|
VP 542F |
G10 BAFFLES FOR VP 542 RESERVOIRS 12.5mm TALL, SET OF 13 |
vp-scientific |
|
VP 542M |
SINGLE POLYPROPYLENE REAGENT RESERVOIR WITH RECESSED NOTCHES FOR 13 BAFFLES |
vp-scientific |
|
VP 542MF |
G10 BAFFLES FOR VP 542M RESERVOIRS, 9.5 mm TALL, SET OF 13 |
vp-scientific |
|
VP 542ML |
BLACK DELRIN LID WITH LIP TO COVER VP 542M RESERVOIR |
vp-scientific |
|
VP 542T |
SINGLE POLYPROPYLENE WASH RESERVOIR WITH SLOTS FOR 13 BAFFLES, 1.5cm DEEP, 4 LOCATING PINS FILL AND DRAIN NIPPLES |
vp-scientific |
|
VP 545 |
96 FOUNTAIN WASH RESERVOIR WITH PTFE FOUNTAINS AND PTFE COATED ALUMINUM BASE, FOR CYBI WELL ROBOT WITH FOUNTAIN AND DRAIN NIPPLES |
vp-scientific |
|
VP 546 |
384 FOUNTAIN WASH RESERVOIR WITH PTFE FOUNTAINS AND PTFE COATED ALUMINUM BASE, FOR CYBI WELL ROBOT WITH FOUNTAIN AND DRAIN NIPPLES |
vp-scientific |
|
VP 546A |
384 FOUNTAIN WASH RESERVOIR WITH FLAT FACED PTFE FOUNTAINS AND PTFE COATED ALUMINUM BASE, FOR ALL ROBOT SYSTEMS, 127mm x 111mm x 26mm |
vp-scientific |
|
VP 546A1T |
384 FOUNTAIN WASH RESERVOIR WITH BEVEL FACED PTFE FOUNTAINS, 25 mm TALL AND PTFE COATED ALUMINUM BASE, FOR ALL ROBOT SYSTEMS, 127mm x 111mm x 47mm |
vp-scientific |
|
VP 546B |
384 FOUNTAIN WASH RESERVOIR WITH PTFE FOUNTAINS AND PTFE COATED ALUMINUM BASE, FOR CYBI WELL ROBOT WITH FOUNTAIN AND DRAIN NIPPLES, LUER FITTINGS AND THICKER BASE THAN VP 546 |
vp-scientific |
|
VP 547 |
96 DUAL PTFE IMPREGNATED ALUMINUM FOUNTAIN WASH RESERVOIR FOR CYBI WELL ROBOT WITH 2 DIFFERENT FOUNTAIN NIPPLES AND A COMMON DRAIN NIPPLE |
vp-scientific |
|
VP 549ETOH |
ALCOHOL WASH RESERVOIR WITH RUNNING FLUIDS OVER A SPILLWAY AND TAKEN TO WASTE BOTTLE. RESERVOIR CONSTRUCTED FROM POLYPROPYLENE |
vp-scientific |
|
VP 549ETOH-2 |
Alcohol Wash Reservoir With Running Fluids Over Spillway, Polypropylene. Inlet & Outlet Luer Ports On Same Side Of Reservoir. Pins At 2 Corners To Hold Blotting Support. |
vp-scientific |
|
VP 549ETOH-4 |
Spillway Reservoir for washing pins or tips in SBS format with continuous flow, spillway designed for alcohols and DMSO, 2 options for inlet and outlet ports, pins for blotting support, polypropylene. |
vp-scientific |
|
VP 549ETOH-RF-1 |
Rapid Flush Alcohol Wash Reservoir With Running Fluids Over A Spillway. Large Inlet And Outlet Ports From Chamber Plus Small Outlet From Spillway. Two Guidepins For Alignment Of Blotting Media Support. Constructed From Polypropylene. |
vp-scientific |
|
VP 549H2O |
WATER WASH RESERVOIR WITH RUNNING FLUIDS OVER A SPILLWAY AND TAKEN TO WASTE BOTTLE. RESERVOIR CONSTRUCTED FROM POLYPROPYLENE |
vp-scientific |
|
VP 549H2O-2 |
Water Wash Reservoir With Running Fluids Over Spillway, Polypropylene. Inlet & Outlet Luer Ports On Same Side Of Reservoir. Pins At 2 Corners To Hold Blotting Support. |
vp-scientific |
|
VP 549H2O-4 |
Water Wash Reservoir With Running Fluids Over Spillway, Polypropylene. Inlet & Outlet Luer Ports On Opposite Short Sides. Pins At 2 Corners To Hold Blotting Support. |
vp-scientific |
|
VP 549H2O-RF |
RAPID FLUSH WATER WASH RESERVOIR WITH RUNNING FLUIDS OVER A SPILLWAY AND TAKEN TO WASTE BOTTLE. RESERVOIR CONSTRUCTED FROM POLYPROPYLENE |
vp-scientific |
|
VP 549PE-1 |
SPILLWAY RESERVOIR, PERKINELMER STYLE WITH QUICK DISCONNECT FITTINGS ON BOTTOM |
vp-scientific |
|
VP 549PE-EP3 |
SPILLWAY RESERVOIR, PERKINELMER STYLE WITH QUICK DISCONNECT FITTINGS ON SIDE |
vp-scientific |
|
VP 550A |
DOCKING STATION FOR ROBOT FLOATING PIN TOOLS – WILL ACCOMMODATE 12 TO 30mm EXPOSED LENGTH PINS |
vp-scientific |
|
VP 550A-HA |
Docking Station for the Hamamatsu and Agilent Pin Tools |
vp-scientific |
|
VP 550A-PE |
Docking Station for the PerkinElmer Style Pin Tools |
vp-scientific |
|
VP 550A-S-S |
Safe Shipping System |
vp-scientific |
|
VP 550A-TeMO |
TECAN TeMO ROBOT ADAPTER PLATE WITH BALL DETENTS AND LOCATING PINS PLUS VP 550A |
vp-scientific |
|
VP 550B |
Docking Station For Robot Floating Pin Tools – Will Accommodate up to 42mm Exposed Length Pins |
vp-scientific |
|
VP 550D |
Docking Station for disposable pin tools, both standard and deep well versions |
vp-scientific |
|
VP 550E |
Docking Station for Pin Tools used with Tecan MCA384 Head and BMPTECAN384-10, -11, or -12. |
vp-scientific |
|
VP 551 |
Centrifuge Plate Holder, Oversized SBS Footprint With An SBS Pocket And Reservoir At Bottom To Hold Up To 277ml. Made From 6061 Aluminum, Clear Hard Anodize Coating. Designed For Qiagen Minelute Filter Plate. Reservoir Fits Hermle Z300-Rotor 220.50 V06. |
vp-scientific |
|
VP 555 |
UNIVERSAL ROBOT PIN TOOL STORAGE/DOCKING STATION |
vp-scientific |
|
VP 560 |
PERISTALTIC PUMP KIT, INCLUDES PUMP, 3 PUMP HEADS AND MOUNTS COMPUTER CONTROL SOFTWARE, RS 232 CABLE, 25' OF 6mm ID VITON TUBING, 25' 8mm ID VITON TUBING |
vp-scientific |
|
VP 561T |
Vacuum trap with automatic overfill shutoff, 3000mL size |
vp-scientific |
|
VP 565 |
1 LITER LOW DENSITY POLYETHYLENE NALGENE BOTTLE WITH 0.91 METER TALL RING STAND WITH SBS BASE, RING STAND CLAMP, TUBING, TUBING CLAMP AND VELCRO STRAP |
vp-scientific |
|
VP 566A |
1 GAL./4L LOW DENSITY POLYETHYLENE CARBOY WITH TUBE ATTACHMENT ON BOTTOM. COMES WITH TUBING, PINCH CLAMP AND VP 567D FLOW RESTRICTOR |
vp-scientific |
|
VP 567B |
0.127 MM DIAMETER FLOW RESTRICTOR |
vp-scientific |
|
VP 567C |
0.254 MM DIAMETER FLOW RESTRICTOR |
vp-scientific |
|
VP 567D |
0.508 MM DIAMETER FLOW RESTRICTOR |
vp-scientific |
|
VP 567E |
0.965 MM DIAMETER FLOW RESTRICTOR |
vp-scientific |
|
VP 570L |
LOW PROFILE RESERVOIR, FLAT BOTTOM, NATURAL POLYPROPYLENE, 25/CASE |
vp-scientific |
|
VP 572 |
12 COLUMN RESERVOIR, V BOTTOM, NATURAL POLYPROPYLENE, 25/CASE |
vp-scientific |
|
VP 572C-24 |
24 COLUMN RESERVOIR, LOW PROFILE, PYRAMID BOTTOM, NATURAL POLYPROPYLENE, 25/CASE |
vp-scientific |
|
VP 572DC |
12 COLUMN RESERVOIR, PARTITIONED, V BOTTOM, NATURAL POLYPROPYLENE, 25/CASE |
vp-scientific |
|
VP 572DC-4 |
4 COLUMN RESERVOIR, PARTITIONED, V BOTTOM, NATURAL POLYPROPYLENE, 25/CASE |
vp-scientific |
|
VP 572DC-6 |
6 COLUMN RESERVOIR, PARTITIONED, V BOTTOM, NATURAL POLYPROPYLENE, 25/CASE |
vp-scientific |
|
VP 574D |
384 WELL RESERVOIR, PYRAMID BOTTOM, NATURAL POLYPROPYLENE, 25/CASE |
vp-scientific |
|
VP 574D-4 |
384 WELL RESERVOIR WITH FOUR CONTROLLED COLUMNS, RESERVOIR VOLUME 155ml, CONTROL WELL COLUMN 2.60ml, 25/CASE |
vp-scientific |
|
VP 574L |
384 WELL RESERVOIR, LOW PROFILE, PYRAMID BOTTOM, NATURAL POLYPROPYLENE, 25/CASE |
vp-scientific |
|
VP 574L-5 |
384 WELL, 5 PARTITIONED RESERVOIR, LOW PROFILE, PYRAMID BOTTOM, WITH WAVE BREAKERS. 25/CASE |
vp-scientific |
|
VP 576D |
96 WELL RESERVOIR, PYRAMID BOTTOM, NATURAL POLYPROPYLENE, 25/CASE |
vp-scientific |
|
VP 576L |
96 WELL RESERVOIR, LOW PROFILE, PYRAMID BOTTOM, NATURAL POLYPROPYLENE, 25/CASE |
vp-scientific |
|
VP 578D |
8 ROW RESERVOIR, V BOTTOM, NATURAL POLYPROPYLENE, 25/CASE |
vp-scientific |
|
VP 578DC |
8 ROW RESERVOIR, PARTITIONED, V BOTTOM, NATURAL POLYPROPYLENE, 25/CASE |
vp-scientific |
|
VP 578LC |
8 Column, Low Profile, Partitioned, V-Bottom, Natural Polypropylene Reservoir |
vp-scientific |
|
VP 581 |
WARPED PCR PLATE FLATTENER |
vp-scientific |
|
VP 581-PE |
POLYCARBONATE ADAPTOR PLATE FOR ATTACHING VP 710C1-M OR VP 710C1-MCE TO THE DECK OF A PERKIN ELMER EP3 OR JANUS WORK STATION. TWO LOCATING PINS LOCATE INTO HOLES IN THE WORK STATION DECK. |
vp-scientific |
|
VP 581-PE-2 |
Polycarbonate Adaptor Plate for Attaching 8-Channel Magnetic Clutch, Direct-Drive Bubble Paddle Reservoirs |
vp-scientific |
|
VP 581A |
POLYPROPYLENE SBS BLOCK ADAPTOR 18 MM THICK WITH ACCESSORY MOUNTING HOLES |
vp-scientific |
|
VP 581A-MICA |
MUSCOVITE VERY HIGH TEMPERATURE MICA SBS BLOCK ADAPTOR 19 MM THICK WITH ACCESSORY MOUNTING HOLES – FOR HEAT BLOCK USAGE |
vp-scientific |
|
VP 581B |
POLYPROPYLENE SBS BLOCK ADAPTOR 12.5 MM THICK WITH ACCESSORY MOUNTING HOLES |
vp-scientific |
|
VP 581B-1536 |
POLYPROPYLENE SBS BLOCK ADAPTOR 12.5 MM THICK MOUNTING PLATE FOR H+P 1536 ESHAKE |
vp-scientific |
|
VP 581B-MICA |
MUSCOVITE VERY HIGH TEMPERATURE MICA SBS BLOCK ADAPTOR 13 MM THICK WITH ACCESSORY MOUNTING HOLES – FOR HEAT BLOCK USAGE |
vp-scientific |
|
VP 581B-PTFE |
PTFE SBS BLOCK ADAPTOR 12.5 MM THICK WITH ACCESSORY MOUNTING HOLES |
vp-scientific |
|
VP 581C-AL |
MICROPLATE COOLER BLOCK, SBS FEATURE ON THE BOTTOM AND AN SBS HOLDER ON THE TOP, OVER ALL HEIGHT = 2.54 CM MADE FROM ALUMINUM AND BLACK ANODIZED |
vp-scientific |
|
VP 581D |
Polypropylene SBS Block Adaptor 12.5mm thick with accessory mounting holes. |
vp-scientific |
|
VP 581R |
RAISED POLYPROPYLENE SBS FEATURE FOR SPILLWAY RESERVOIRS |
vp-scientific |
|
VP 581R-HL |
SBS plate adapter with SBS holder on the top, straight sides, 4 holes for attachment to Hamilton plate holder support legs, 0.5″ tall, black anodized aluminum. |
vp-scientific |
|
VP 590 |
A custom Delrin Test Tube Rack that can hold two 50 ml Centrifuge Tubes, six 15 ml Centrifuge Tubes and 12 Micro Centrifuge tubes. |
vp-scientific |
|
VP 601 |
LIQUID LEVEL DETECTION SYSTEM INCLUDING AMPLIFIER, AC-OUT CONTROL, CURRENT LOOP CONTROL AND POWER SUPPLY |
vp-scientific |
|
VP 601A |
FIBER OPTIC LED LIQUID LEVEL SENSOR WITH TRANSMITTER AND RECEIVER |
vp-scientific |
|
VP 601B-1 |
SBS PLATE MOUNTING SYSTEM FOR LIQUID LEVEL SENSOR |
vp-scientific |
|
VP 601C |
DB15 CONTROL CONNECTOR FOR BARNANT CORP. MODEL MASTERFLEX #7550-20 PERISTALTIC PUMP |
vp-scientific |
|
VP 601D |
POWER SUPPLY AND TUBING PINCH VALVE. |
vp-scientific |
|
VP 612 |
12 INCH HOOK & LOOP STRAP (HOLDS BUNDLE OF 5 PLATES) – 10/PKG |
vp-scientific |
|
VP 614 |
14 INCH NYLON CABLE TIES – 50/PKG |
vp-scientific |
|
VP 618 |
18 INCH HOOK & LOOP STRAP (HOLDS BUNDLE OF 8 PLATES) – 10/PKG |
vp-scientific |
|
VP 619 |
RUBBERBANDS (HOLDS BUNDLES OF 1 PLATE TO 10 PLATES) – 20/PKG |
vp-scientific |
|
VP 624 |
24 INCH NYLON CABLE TIES – 50/PKG |
vp-scientific |
|
VP 625 |
24 INCH HOOK & LOOP STRAP (HOLDS BUNDLE OF 12 PLATES) – 10/PKG |
vp-scientific |
|
VP 632 |
FOAMED SILICON RUBBER GASKETS – 10/PKG |
vp-scientific |
|
VP 640 |
LID SPACERS – 10/PKG |
vp-scientific |
|
VP 650 |
BUNDLE BOTTOMS – 5/PKG |
vp-scientific |
|
VP 651 |
BUNDLE TOPS – 5/PKG |
vp-scientific |
|
VP 670 |
CABLE TIE GUN |
vp-scientific |
|
VP 680 |
CABLE TIE CUTTER |
vp-scientific |
|
VP 690 |
SILICONE GREASE – 5.3 oz. TUBE |
vp-scientific |
|
VP 700 |
PROGRAMMABLE SMART SWITCH, WITH SOFTWARE TO SEPARAY CONTROL ON OFF FUNCTIONS OF 3 POWER OUTLETS, EACH OUTLET HAS A 5 AMP CIRCUIT BREAKER, OPERATES OFF 115 VOLTS, 60 CYCLES |
vp-scientific |
|
VP 700-15 |
PROGRAMMABLE SMART SWITCH, WITH SOFTWARE TO SEPARAY CONTROL ON OFF FUNCTIONS OF 3 POWER OUTLETS, ONE OUTLET HAS A 15 AMP CIRCUIT BREAKER AND THE OTHER TWO HAVE 2 AMP CIRCUIT BREAKERS, OPERATES OFF 115 VOLTS, 60 CYCLES |
vp-scientific |
|
VP 700-15CE |
PROGRAMMABLE SMART SWITCH, WITH SOFTWARE TO SEPARAY CONTROL ON OFF FUNCTIONS OF 3 POWER OUTLETS, ONE OUTLET HAS A 15 AMP CIRCUIT BREAKER AND THE OTHER TWO HAVE 2 AMP CIRCUIT BREAKERS, OPERATES OFF .230 VOLTS, 50 CYCLES, CE COMPLIANT |
vp-scientific |
|
VP 700-QS |
Quick Switch To Separay Control On/Off Functions Of 1 Power Outlet. 115Volts, 60Hz. Each. |
vp-scientific |
|
VP 700A |
Programmable Smart Switch for computer control of one device via a single 6A 110V outlet, connects to computer by USB, allows on/off control direct from computer and at pre-set times. |
vp-scientific |
|
VP 700A-4 |
Programmable Smart Switch for computer control of four devices via four 1, 120V outlets, connects to computer by Ethernet(RJ45) or Serial port, built-in web server allows control from any network computer, a directly connected computer, or a smartphone. |
vp-scientific |
|
VP 700CE |
PROGRAMMABLE SMART SWITCH, WITH SOFTWARE TO SEPARAY CONTROL ON OFF FUNCTIONS OF 3 POWER OUTLETS, EACH OUTLET HAS A 5 AMP CIRCUIT BREAKER, OPERATES OFF 230 VOLTS, 50 CYCLES, CE COMPLIANT |
vp-scientific |
|
VP 701 |
MAGNETIC TUMBLE STIRRER – MANUAL – FOUR PLATE |
vp-scientific |
|
VP 706-1 |
Mega Stirrus 1 Horizontal Magnetic Stirrer With NdFeB Drive Magnet Powered By A 3/8 Horse Power AC Inverter Duty Motor And Operates At Speeds From 30 To 300 RPM. |
vp-scientific |
|
VP 706-2 |
Mega Stirrus 2 Horizontal Magnetic Stirrer With NdFeB Drive Magnet Powered By A Brushless 90 Watt Motor (1/9 HP) And Operates At Speeds From 100 To 450 RPM. |
vp-scientific |
|
VP 706-7 |
SEVEN POSITION STIRRER, 100 TO 2,500 RPM, 120 VOLTS AC. |
vp-scientific |
|
VP 706B-1 |
MINI STIRRUS HORIZONTAL MAGNETIC STIRRER WITH A 22.86 CM BY 22.86 CM FOOT PRINT, 115 VOLTS AC |
vp-scientific |
|
VP 706B-3 |
MINI STIRRUS HORIZONTAL/VORTEX MAGNETIC STIRRER WITH A 22.86 CM BY 22.86 CM FOOT PRINT, AND A VORTEX CAVITY FOR ONE MICROPLATE. 115 VOLTS AC |
vp-scientific |
|
VP 706B-4H |
HORIZONTAL MAGNETIC STIRRER/HEATERwith Red Lion Temperature control(22 C to 140C) and speed control from 100 to 2000 RPM, operates on 120 Volts AC |
vp-scientific |
|
VP 706B-5 |
VP 706B-5 Mini Stirrus Horizontal/Vortex Magnetic Stirrer With A 22.86cm By 22.86cm Foot Print, And 15.24cm top plate with a 8.89cm ring containing 12 holes to accommodate 12 cryotubes. Magnet speed = 5000 RPM, 115 Volts AC |
vp-scientific |
|
VP 707 |
LEVITATION MAGNETIC STIRRER – MANUAL TYPE – STIRS ONE DEEP WELL PLATE |
vp-scientific |
|
VP 707-1 |
TEMPERATURE CONTROLLED ENVIRONMENTAL CHAMBER FOR CAROUSEL SERIES LEVITATION STIRRERS |
vp-scientific |
|
VP 707-1CE |
CE COMPLIANT TEMPERATURE CONTROLLED ENVIRONMENTAL CHAMBER FOR CAROUSEL SERIES LEVITATION STIRRERS, 230 VOLT, 50 HZ |
vp-scientific |
|
VP 707-2 |
COUNT DOWN TIMER CONTROL FOR CAROUSEL SERIES LEVITATION STIRRERS |
vp-scientific |
|
VP 707-3 |
COMPUTER CONTROLLED OPERATION FOR CAROUSEL SERIES LEVITATION STIRRERS |
vp-scientific |
|
VP 707B1 |
LEVITATION MAGNETIC STIRRER – CAROUSEL TYPE – STIRS 12 DEEP WELL MICROPLATES, 1 LIFT STATION – 115 VOLTS AC – 60 HZ |
vp-scientific |
|
VP 707B1CE |
LEVITATION MAGNETIC STIRRER – CAROUSEL TYPE – STIRS 12 DEEP WELL MICROPLATES, 1 LIFT STATION – 230 VOLTS AC – 50 HZ |
vp-scientific |
|
VP 707B2 |
LEVITATION MAGNETIC STIRRER – CAROUSEL TYPE – STIRS 12 DEEP WELL MICROPLATES AT UP TO 56 LIFTS/MINUTE, 2 LIFT STATIONS – 115 VOLTS AC, 60 HZ |
vp-scientific |
|
VP 707B2CE |
LEVITATION MAGNETIC STIRRER – CAROUSEL TYPE – STIRS 12 DEEP WELL MICROPLATES AT UP TO 56 LIFTS/MINUTE, 2 LIFT STATIONS – 230 VOLTS AC, 50 HZ, CE COMPLIANT |
vp-scientific |
|
VP 707B4 |
LEVITATION MAGNETIC STIRRER – CAROUSEL TYPE – STIRS 12 DEEP WELL MICROPLATES,4 LIFT STATIONS – 115 VOLTS AC – 60 HZ |
vp-scientific |
|
VP 707B4CE |
LEVITATION MAGNETIC STIRRER – CAROUSEL TYPE – STIRS 12 DEEP WELL MICROPLATES, 4 LIFT STATIONS – 230 VOLTS AC – 50 HZ |
vp-scientific |
|
VP 707C |
LINEAR SHUTTLE MAGNETIC LEVITATION STIRRER WITH SERVO MOTOR, 115 V AC 60 HZ, |
vp-scientific |
|
VP 707CCE |
LINEAR SHUTTLE MAGNETIC LEVITATION STIRRER WITH SERVO MOTOR, 230 V AC 50 HZ, CE COMPLIANT |
vp-scientific |
|
VP 707EC |
Magnetic Levitation Stirrer for Automation. The VP 707EC is a magnetic levitation stirrer designed for use on robotic workstations. This stirrer is fully programmable and computer controlled via USB or RS232 serial ports. Actuated grippers load and unload the plate, allowing it to be fully integrated into an automated platform, with no human intervention necessary. Parameters including stirring speed, height of stir element motion, and grip strength are all fully adjustable. |
vp-scientific |
|
VP 708-CON |
BASE TO HOLD VP 710C1 VERTICAL WITH 5 SHELVES TO HOLD PLATES ON BOTH SIDES OF THE STIRRER |
vp-scientific |
|
VP 708-CON-1 |
VP 710G6 WITH BASE PLATE ON THE END SO THE STIRRER CAN STAND UPRIGHT. |
vp-scientific |
|
VP 708A |
VORTEX MICROPLATE MAGNETIC LATERAL TUMBLE STIRRER WITH BRUSHLESS MOTOR 115VAC 60 HZ AND DIGITAL RPM READOUT |
vp-scientific |
|
VP 708A-1 |
– |
vp-scientific |
|
VP 708A-L-PLATTER |
LANDSCAPE VIEW PLATTER WITH EXPOSED BOTTOM FOR VP 708A |
vp-scientific |
|
VP 708ACE |
VORTEX MICROPLATE MAGNETIC LATERAL TUMBLE STIRRER WITH BRUSHLESS MOTOR 230VAC 50 HZ AND DIGITAL RPM READOUT, CE COMPLIANT |
vp-scientific |
|
VP 708S |
SUPER VORTEX MICROPLATE MAGNETIC LATERAL TUMBLE STIRRER WITH BRUSHLESS MOTOR 115VAC 60 HZ AND DIGITAL RPM READOUT |
vp-scientific |
|
VP 710-3 |
COMPUTER CONTROLLED OPERATION FOR VP 710 ROTARY SERIES TUMBLE STIRRERS |
vp-scientific |
|
VP 710-CC |
Computer Control Software, for select VP 710 Magnetic Tumble Stirrers, including VP 710C3 series and VP 710E3 series |
vp-scientific |
|
VP 710-RPM |
BATTERY POWERED HALL SENSOR RPM METER |
vp-scientific |
|
VP 710A |
ROTARY MAGNETIC TUMBLE STIRRER, HIGH SPEED – STIRS 9 DEEP WELL PLATES – 115 VOLTS AC – 60 HZ |
vp-scientific |
|
VP 710ACE |
ROTARY MAGNETIC TUMBLE STIRRER, HIGH SPEED – STIRS 9 DEEP WELL PLATES – 230 VOLTS AC – 50 HZ |
vp-scientific |
|
VP 710C-6 |
Magnetic Tumble Stirring Cylinder (US Patents # 6,176,6097 and 7,484,880), 6 inch (15.3cm) magnet length, 48 MGO, with spindle, bearings and bearing mounts, 8.1inch (20.5cm) overall length. |
vp-scientific |
|
VP 710C-7 |
Magnetic Tumble Stirring Cylinder (US Patents # 6,176,6097 and 7,484,880), 7 inch (17.8cm) magnet length, 48 MGO, with spindle, bearings and bearing mounts, 9.2 inch (23.3cm) overall length. |
vp-scientific |
|
VP 710C1 |
ROTARY MAGNETIC TUMBLE STIRRER, HIGH SPEED, 14cm LONG USABLE STIRRING DECK, WITH MOTOR HOUSING AND PLATE HOLDER, STIRS 2 DEEP WELL MICROPLATES OR 6 STANDARD MICROPLATES-115 VOLTS AC – 60 HZ |
vp-scientific |
|
VP 710C1-ALPFX |
ROTARY MAGNETIC TUMBLE STIRRER, HIGH SPEED, 14cm LONG USABLE STIRRING DECK, MOUNTS TO THE BOTTOM OF V&P FXALP-FM ON THE BECKMAN FX WORKSTATION, 115 VOLTS AC – 60 HZ |
vp-scientific |
|
VP 710C1-ALPFXCE |
ROTARY MAGNETIC TUMBLE STIRRER, HIGH SPEED, 14cm LONG USABLE STIRRING DECK, MOUNTS TO THE BOTTOM OF V&P FXALP-FM ON THE BECKMAN FX WORKSTATION, 230 VOLTS AC – 50 HZ, CE COMPLIANT |
vp-scientific |
|
VP 710C1-M |
ROTARY MAGNETIC TUMBLE STIRRER, HIGH SPEED, 14cm LONG USABLE STIRRING DECK, MOUNTS TO MULTIPLE ROBOT DECKS INCLUDING BECKMAN FX & NX, TECAN EVO, PERKIN ELMER EP3 & JANUS, CALIPER SCICLONE, HAMILTON MICROLAB STAR AND MANY OTHERS, 115 VOLTS AC – 60 HZ |
vp-scientific |
|
VP 710C1-M-KIT |
ROTARY MAGNETIC TUMBLE STIRRER, HIGH SPEED, 14cm LONG USABLE STIRRING DECK, MOUNTS TO MULTIPLE ROBOT DECKS INCLUDING BECKMAN FX & NX, TECAN EVO, PERKIN ELMER EP3 & JANUS, CALIPER SCICLONE, HAMILTON MICROLAB STAR AND MANY OTHERS, 115 VOLTS AC – 60 HZ, INCL |
vp-scientific |
|
VP 710C1-MCE |
ROTARY MAGNETIC TUMBLE STIRRER, HIGH SPEED, 14cm LONG USABLE STIRRING DECK, MOUNTS TO MULTIPLE ROBOT DECKS INCLUDING BECKMAN FX & NX, TECAN EVO, PERKIN ELMER EP3 & JANUS, CALIPER SCICLONE AND HAMILTON MICROLAB STAR AND MANY OTHERS, 230 VOLTS AC – 50 HZ, C |
vp-scientific |
|
VP 710C1-MCE-KIT |
ROTARY MAGNETIC TUMBLE STIRRER, HIGH SPEED, 14cm LONG USABLE STIRRING DECK, MOUNTS TO MULTIPLE ROBOT DECKS INCLUDING BECKMAN FX & NX, TECAN EVO, PERKIN ELMER EP3 & JANUS, CALIPER SCICLONE AND HAMILTON MICROLAB STAR AND MANY OTHERS, 230 VOLTS AC – 50 HZ, C |
vp-scientific |
|
VP 710C1CE |
ROTARY MAGNETIC TUMBLE STIRRER, HIGH SPEED, 14cm LONG USABLE STIRRING DECK, STIRS 2 DEEP WELL MICROPLATES OR 6 STANDARD MICROPLATES -EUROPEAN 230 VOLTS AND 50 HERTZ CONTROLLER, CE COMPLIANT |
vp-scientific |
|
VP 710C3 |
Stepper Motor powered Rotary Magnetic Tumble Stirrer, high speed and high torque, 14cm long usable stirring deck, with motor housing and plate holder, stirs 2 deep well microplates or 6 standard microplates-115 volts AC – 60 Hz |
vp-scientific |
|
VP 710C3-1 |
Microplate Deck Gray PVC |
vp-scientific |
|
VP 710C3-2 |
Microplate Deck Mica |
vp-scientific |
|
VP 710C3-3 |
Stand to convert to Vortex stirring, 3 shelves |
vp-scientific |
|
VP 710C3-4 |
Stand to convert to Vortex stirring, base only |
vp-scientific |
|
VP 710C3CE |
Stepper Motor powered Rotary Magnetic Tumble Stirrer, high speed and high torque, 14cm long usable stirring deck, with motor housing and plate holder, stirs 2 deep well microplates or 6 standard microplates-230 volts AC – 50 Hz |
vp-scientific |
|
VP 710C3P |
Stepper Motor powered Rotary Magnetic Tumble Stirrer, high speed and high torque, 14cm long usable stirring deck, with motor housing, and VP 710C3P-1 heat resistant mica plate holder for single position heat block-115 volts AC – 60 Hz |
vp-scientific |
|
VP 710C3P-1 |
Microplate Holder, for VP 710C3P series Tumble Stirrers, made of Mica, heat resistant to protect Stirrer, single SBS pocket for VP 741ABZ series or VP 741BBZ series Heating Blocks |
vp-scientific |
|
VP 710C3PCE |
Stepper Motor powered Rotary Magnetic Tumble Stirrer, high speed and high torque, 14cm long usable stirring deck, with motor housing, and VP 710C3P-1 heat resistant mica plate holder for single position heat block-220 volts AC – 50 Hz |
vp-scientific |
|
VP 710C4 |
Stepper Motor powered Rotary Magnetic Tumble Stirrer, high speed and high torque, 14cm long usable stirring deck, with motor housing and plate holder, stirs 2 deep well microplates or 6 standard microplates-115 volts AC – 60 Hz |
vp-scientific |
|
VP 710C4-1 |
Cover plate for VP 710C4 |
vp-scientific |
|
VP 710C4-2 |
Single microplate position mica deck for VP 710C4. |
vp-scientific |
|
VP 710C4-7 |
Magnetic Tumble Stirrer, robot gripper accessible, powered by stepper motor, high speed and high torque, stirs up to 12 standard microplates, 16.5 cm long stir area, provides heavy load and/or long time stirring, 110 V, 60 Hz |
vp-scientific |
|
VP 710C4-7CE |
Magnetic Tumble Stirrer, robot gripper accessible, powered by stepper motor, high speed and high torque, stirs up to 12 standard microplates, 16.5 cm long stir area, provides heavy load and/or long time stirring, 220 V, 50/60 Hz, CE compliant |
vp-scientific |
|
VP 710C4CE |
Stepper Motor powered Rotary Magnetic Tumble Stirrer, high speed and high torque, 14cm long usable stirring deck, with motor housing and plate holder, stirs 2 deep well microplates or 6 standard microplates-220 volts AC – 50 Hz |
vp-scientific |
|
VP 710CS |
Rotary Tumble Stirrer with 10″ magnet cylinder, Smart Motor to fit into Chemspeed Robot basket rack. |
vp-scientific |
|
VP 710D |
Rotary Magnetic Tumble Stirrer, 1250 Max RPM, 25mm Long Magnetic Cylinder, 115 Volts AC – 60 Hz |
vp-scientific |
|
VP 710D-1 |
Rotary Magnetic Tumble Stirrer, 1250 max RPM, 25mm long magnetic cylinder, 115 volts AC – 60 Hz, with SBS stir deck for VP 750 series Bubble Paddle Reservoirs with SBS footprint. |
vp-scientific |
|
VP 710D2 |
Rotary Magnetic Tumble Stirrer, 1250 Max RPM, 25mm Long Magnetic Cylinder, 115 Volts AC – 60 Hz. |
vp-scientific |
|
VP 710D2-1 |
VP 710D2 accessory deck to hold VP 756B Bubble Paddle Reservoir. |
vp-scientific |
|
VP 710D2-2 |
VP 710D2 Accessory holder to hold SBS-dimensioned reservoirs (127.7 mm X 85.5 mm). |
vp-scientific |
|
VP 710D2-3 |
Accessory stand to hold the VP 710D2 upright for powerful conventional stirring or lateral vortex stirring. |
vp-scientific |
|
VP 710D2-4 |
VP 710D2 accessory kit for use with Syringe Pumps, includes lab support stand, aluminum arm to attach to VP 710D2, clamp, plastic syringe holder for KD Scientific Pump (Legato210). |
vp-scientific |
|
VP 710D2-4A |
P 710D2 accessory for use with Syringe Pumps, plastic syringe holder, made for KD Scientific Pump (Legato210) that holds two syringes of same size. |
vp-scientific |
|
VP 710D2-4B |
VP 710D2 accessory for use with Syringe Pumps, aluminum arm for attaching VP 710D2 to a lab support stand. |
vp-scientific |
|
VP 710D2-5 |
Accessory deck to hold VP 750-13-PP bubble paddles reservoir |
vp-scientific |
|
VP 710D2CE |
Rotary Magnetic Tumble Stirrer, 1250 Max RPM, 25mm Long Magnetic Cylinder, 85-250 Volts AC, 50/60 Hz, CE compliant |
vp-scientific |
|
VP 710E-2 |
ROTARY MAGNETIC TUMBLE STIRRER, HIGH SPEED, 54cm LONG USABLE STIRRING DECK, STIRS 5 DEEP WELL MICROPLATES -115 VOLTS AC – 60 HZ |
vp-scientific |
|
VP 710E-2CE |
ROTARY MAGNETIC TUMBLE STIRRER, HIGH SPEED, 54cm LONG – STIRS 5 DEEP WELL MICROPLATES – 48 MGO MAGNETIC CYLINDER, 230 V – 50 HZ |
vp-scientific |
|
VP 710E-2HM |
Rotary Magnetic Tumble Stirrer, High Speed, 54cm Long, Deck Made From MICA – Stirs 3 Deep Well Microplates in VP 743A-1RM, 48 MGO Magnetic Cylinder, 120 V – 60 HZ |
vp-scientific |
|
VP 710E-2HM-1 |
Rotary Magnetic Tumble Stirrer, high speed, 54cm long deck made from mica with 3 positions for heating or cooling blocks, with insulation between each position, 48 MGO magnetic cylinder, 120 V – 60 Hz. |
vp-scientific |
|
VP 710E3 |
Stepper Motor powered Rotary Magnetic Tumble Stirrer, high speed and high torque, 54cm long deck made from ABS, stirs 5 deep well microplates, 48 MGO magnetic cylinder, 120 V – 60 Hz |
vp-scientific |
|
VP 710E3-1 |
Three position mica deck to accommodate VP 743ABLZ-R-MB three position heat block for VP 710E3 series stirrers. |
vp-scientific |
|
VP 710E3-2 |
Mica deck with 3 positions for heating or cooling blocks, with insulation between each position for VP 710E3 series stirrers. |
vp-scientific |
|
VP 710E3CE |
Stepper Motor powered Rotary Magnetic Tumble Stirrer, high speed and high torque, 54cm long deck made from ABS, stirs 5 deep well microplates, 48 MGO magnetic cylinder, 220 V – 50 Hz |
vp-scientific |
|
VP 710F |
MINI ROTARY MAGNETIC TUMBLE STIRRER, HIGH SPEED, FLEXIBLE DRIVE, STIRS 1 MICROPLATE ON WORKSTATION DECK, 115 VOLTS AC 60 HZ |
vp-scientific |
|
VP 710FCE |
MINI ROTARY MAGNETIC TUMBLE STIRRER, HIGH SPEED, FLEXIBLE DRIVE, STIRS 1 MICROPLATE ON WORKSTATION DECK, 230 VOLTS AC 50 HZ |
vp-scientific |
|
VP 710FSM |
– |
vp-scientific |
|
VP 710G11HM |
Rotary Magnetic Tumble Stirrer, high speed, 25.4cm long usable stirring deck, deck made of Mica with 2 SBS pockets, for stirring and heating samples at the same time, 115 volts AC, 60 Hz. |
vp-scientific |
|
VP 710G6 |
ROTARY MAGNETIC TUMBLE STIRRER, WITH 5 TO 1 GEAR HEAD AND , 15.3 cm LONG USABLE STIRRING DECK, MADE WITH ABS PLASTIC, HEAT RESISTANT TO 60 C -115 VOLTS AC – 60 HZ |
vp-scientific |
|
VP 710G6CE |
ROTARY MAGNETIC TUMBLE STIRRER, WITH 5 TO 1 GEAR HEAD AND , 15.3 cm LONG USABLE STIRRING DECK, MADE WITH ABS -230 VOLTS AC – 50 HZ, CE COMPLIANT |
vp-scientific |
|
VP 710G6HHT |
ROTARY MAGNETIC TUMBLE STIRRER, WITH 5 TO 1 GEAR HEAD AND , 15.3 cm LONG USABLE STIRRING DECK, MADE WITH PEEK, TORLON AND POLYCARBONATE, HEAT RESISTANT TO 200 C, HEAT RESISTANT TO 200C -115 VOLTS AC – 60 HZ |
vp-scientific |
|
VP 710G6HHTCE |
ROTARY MAGNETIC TUMBLE STIRRER, WITH 5 TO 1 GEAR HEAD AND , 15.3 cm LONG USABLE STIRRING DECK, MADE WITH PEEK, TORLON AND POLYCARBONATE, HEAT RESISTANT TO 200 C, HEAT RESISTANT TO 200C – 230 VOLTS AC – 50 HZ, CE COMPLIANT |
vp-scientific |
|
VP 710J |
ROTARY MAGNETIC TUMBLE STIRRER, WITH 5 TO 1 GEAR HEAD, MAX SPEED 500 RPM AND 16cm LONG USABLE STIRRING DECK, MADE WITH POLYCARBONATE PLASTIC, HEAT RESISTANT TO 120C -115 VOLTS AC – 60 HZ |
vp-scientific |
|
VP 710J-1 |
ROTARY MAGNETIC TUMBLE STIRRER, MAX Z CLEARANCE, WITH 5 TO 1 GEAR HEAD, MAX SPEED 500 RPM AND 16cm LONG USABLE STIRRING DECK, MADE WITH POLYCARBONATE PLASTIC, HEAT RESISTANT TO 120C -115 VOLTS AC – 60 HZ |
vp-scientific |
|
VP 710J-1CE |
ROTARY MAGNETIC TUMBLE STIRRER, MAX Z CLEARANCE, WITH 5 TO 1 GEAR HEAD, MAX SPEED 500 RPM AND 16cm LONG USABLE STIRRING DECK, MADE WITH POLYCARBONATE PLASTIC, HEAT RESISTANT TO 120C – CE COMPLIANT 230 VOLTS – 50 HZ |
vp-scientific |
|
VP 710J-AIR |
ROTARY MAGNETIC TUMBLE STIRRER, WITH AN AIR MOTOR, MAX SPEED 5000 RPM AND 16cm LONG USABLE STIRRING DECK, MADE WITH POLYCARBONATE PLASTIC, HEAT RESISTANT TO 120C -115 VOLTS AC – 60 HZ |
vp-scientific |
|
VP 710JCE |
ROTARY MAGNETIC TUMBLE STIRRER, WITH 5 TO 1 GEAR HEAD, MAX SPEED 500 RPM AND 16cm LONG USABLE STIRRING DECK, MADE WITH POLYCARBONATE PLASTIC, HEAT RESISTANT TO 120C – CE COMPLIANT 230 VOLTS – 50 HZ |
vp-scientific |
|
VP 710MXL7T |
SLOW SPEED (10 to 89 RPM), HIGH TORQUE ROTARY MAGNETIC TUMBLE STIRRER, 16 CM LONG USABLE STIRRING DECK, MADE WITH ABS, EQUIPPED WITH TACHOMETER-115 VOLTS AC – 60 HZ |
vp-scientific |
|
VP 710MXL7TCE |
SLOW SPEED (10 to 89 RPM), HIGH TORQUE ROTARY MAGNETIC TUMBLE STIRRER, 16 CM LONG USABLE STIRRING DECK, MADE WITH ABS, EQUIPPED WITH TACHOMETER-230 VOLTS AC – 50 HZ |
vp-scientific |
|
VP 710S2 |
SUPER ROTARY MAGNETIC TUMBLE STIRRER, HIGH SPEED – STIRS PLATFORM WITH 7 FOOT PRINTS FOR STANDARD OR DEEP WELL MICROPLATES – 115 V – 60 HZ, 48 MGO MAGNET |
vp-scientific |
|
VP 710S2CE |
SUPER ROTARY MAGNETIC TUMBLE STIRRER, HIGH SPEED – STIRS PLATFORM WITH 7 FOOT PRINTS FOR STANDARD OR DEEP WELL MICROPLATES – 230 V – 50 HZ, CE COMPLIANT, 48 MGO MAGNET |
vp-scientific |
|
VP 710SM |
MINI SMART MOTOR TUMBLE STIRRER WITH 15 CM MAGNETIC STIRRED AREA AND COMPUTER CONTROL, 115V – 60 HZ |
vp-scientific |
|
VP 710SM-1 |
LOW PROFILE, MINI SMART MOTOR TUMBLE STIRRER WITH 14 CM STIRRED AREA, 57 MM TALL. COMPUTER CONTROL, 115V – 60 HZ |
vp-scientific |
|
VP 710SM-1-2 |
LOW PROFILE TUMBLE STIRRER FOR BUBBLE PADDLES WITH 5CM STIRRED AREA, 57 MM TALL, POWERED BY A SMART MOTOR. BOX CONTAINS MOUNTING RIVNUTS ON TOP AND BOTTOM, 115 VOLTS |
vp-scientific |
|
VP 710SM-1-2CE |
LOW PROFILE TUMBLE STIRRER FOR BUBBLE PADDLES WITH 5CM STIRRED AREA, 57 MM TALL, POWERED BY A SMART MOTOR. BOX CONTAINS MOUNTING RIVNUTS ON TOP AND BOTTOM, 230 VOLTS |
vp-scientific |
|
VP 710SM3P |
MINI SMART MOTOR TUMBLE STIRRER WITH 30cm MAGNETIC STIRRED AREA AND COMPUTER CONTROL, 115V – 60HZ |
vp-scientific |
|
VP 710SM4PH |
Smart Motor Tumble Stirrer With 30cm Magnetic Stirred Area And Computer Control, 115V – 60HZ, Includes Software, MICA Heat Protection and 150C resistant magnets, price each |
vp-scientific |
|
VP 710SMHT |
MINI SMART MOTOR TUMBLE STIRRER WITH HEAT RESISTANT DECK FOR HEAT BLOCK APPLICATIONS AND COMPUTER CONTROL, 115V – 60 HZ |
vp-scientific |
|
VP 710SMHTCE |
MINI SMART MOTOR TUMBLE STIRRER WITH HEAT RESISTANT DECK FOR HEAT BLOCK APPLICATIONS AND COMPUTER CONTROL, CE COMPLIANT 230V – 50 HZ |
vp-scientific |
|
VP 710T |
ROTARY TUMBLE STIRRER, PROFILE TABLE MOUNT FOR TECAN, 30 CM STIRRED AREA, 115 V – 60HZ |
vp-scientific |
|
VP 710T-SM |
Magnetic Tumble Stirrer, designed to mount to a Profile Table (not included), powered by a Smart Motor, 14″ magnetic cylinder, 120V, 60 Hz |
vp-scientific |
|
VP 710T-SMCE |
Magnetic Tumble Stirrer, designed to mount to a Profile Table (not included), powered by a Smart Motor, 14″ magnetic cylinder, 220V, 60 Hz |
vp-scientific |
|
VP 711 |
TUMBLE STIR BARS – 1.57mm x 1.91mm x 4.75mm – 1000/PKG |
vp-scientific |
|
VP 711-1 |
PARYLENE COATED VP 711 STIR BARS- 1.67mm x 2.01mm x 4.80mm – 1000/PKG |
vp-scientific |
|
VP 711-3 |
TUMBLE STIR BARS – NOT DEBURRED – 1.57mm x 1.9mm x 4.75mm – 1000/PKG |
vp-scientific |
|
VP 711A-1S |
DROP DISPENSER – 96 FOR VP 711, VP 711-1,VP 711D & VP 711D-1 STIR BARS, IMPROVED ANTI-JAM VERSION |
vp-scientific |
|
VP 711A-1SD |
DROP DISPENSER – 96 FOR VP 711, VP 711-1,VP 711D & VP 711D-1 STIR BARS, IMPROVED ANTI-JAM VERSION FOR DEEP WELL MICROPLATES |
vp-scientific |
|
VP 711B |
AUTOCLAVEABLE FLIP DISPENSER – 96 HOLES FOR VP 711 |
vp-scientific |
|
VP 711D |
SUPER TUMBLE STIR DOWELS – 1.93mm DIAMETER, 4.75mm LENGTH – 1000/PKG |
vp-scientific |
|
VP 711D-1 |
PARYLENE COATED VP 711D SUPER TUMBLE STIR DOWELS – 1.98mm DIAMETER, 4.80mm LENGTH – 1000/PKG |
vp-scientific |
|
VP 711D-3 |
VP 711D TUMBLE STIR DOWELS – NOT DEBURRED, FOR MACERATING TISSUE, 1000/PKG |
vp-scientific |
|
VP 712 |
TUMBLE STIR BARS – 1.57mm x 1.91mm x 2.90mm LONG – 1000/PKG |
vp-scientific |
|
VP 712-1 |
PARYLENE COATED VP 712 TUMBLE STIR BARS- 1.67mm x 2.01mm x 3.00mm LONG – 1000/PKG |
vp-scientific |
|
VP 712-2 |
PTFE COATED VP 712 TUMBLE STIR BARS – 3.57mm x 3.70mm x 4.85mm LONG – 100/PKG |
vp-scientific |
|
VP 712-3 |
VP 712 TUMBLE STIR BARS – NOT DEBURRED, FOR MACERATING TISSUE -1000/PKG |
vp-scientific |
|
VP 712A-1S |
DROP DISPENSER – 96 HOLES FOR VP 712 STIR BARS |
vp-scientific |
|
VP 712B |
AUTOCLAVEABLE FLIP DISPENSER – 96 HOLES FOR VP 712 STIR BARS |
vp-scientific |
|
VP 712D |
SUPER TUMBLE STIR DOWELS – 1.93mm DIAMETER, 2.46mm LENGTH – 1000/PKG |
vp-scientific |
|
VP 716 |
TUMBLE STIR DOWELS – 1.27mm DIAMETER, 1.52mm LENGTH – 1000/PKG |
vp-scientific |
|
VP 716-1 |
PARYLENE COATED VP 716 – TUMBLE STIR DOWELS – DIAMETER 1.32mm, LENGTH 1.57mm – 1,000/PKG |
vp-scientific |
|
VP 716A |
DROP DISPENSER – 96 HOLES FOR VP 716 STIR DOWELS |
vp-scientific |
|
VP 716B |
AUTOCLAVEABLE FLIP DISPENSER – 96 HOLES FOR VP 716 STIR DOWELS |
vp-scientific |
|
VP 716D |
384 AUTOCLAVEABLE DROP DISPENSER FOR VP 716 STIR DOWELS 1.27mm DIAMETER, AND 1.52mm LONG |
vp-scientific |
|
VP 717 |
TUMBLE STIR DOWELS – DIAMETER .457mm, LENGTH .1.20mm – 1000/PKG |
vp-scientific |
|
VP 717-1 |
PARYLENE COATED VP 717 TUMBLE STIR DOWELS – DIAMETER .52mm, LENGTH 1.26mm – 1000/PKG |
vp-scientific |
|
VP 718 |
NASA TUMBLE STIR DOWELS – 0.0762 mm DIAMETER, 1mm LENGTH – 1000/PKG |
vp-scientific |
|
VP 718-D |
TUMBLE STIR DOWELS – 0.0762 mm DIAMETER, 3mm LENGTH – 1000/PKG |
vp-scientific |
|
VP 718-E |
TUMBLE STIR DOWELS – 0.1524 mm DIAMETER, 3mm LENGTH – 1000/PKG |
vp-scientific |
|
VP 718-F |
TUMBLE STIR DOWELS – 0.2032 mm DIAMETER, 3mm LENGTH – 1000/PKG |
vp-scientific |
|
VP 718-G |
TUMBLE STIR DOWELS – 0.2540 mm DIAMETER, 3mm LENGTH – 1000/PKG |
vp-scientific |
|
VP 719A |
DROP DISPENSER – 48 HOLES FOR VP 719F AND VP 719F-1 STIR DISKS |
vp-scientific |
|
VP 719F |
SUPER TUMBLE STIR DISCS – 7.95mm DIAMETER, 0.635mm THICK – 1000/PKG |
vp-scientific |
|
VP 719F-1 |
PARYLENE COATED VP 719F SUPER TUMBLE STIR DISCS – 8.00mm DIAMETER, 0.685mm THICK – 1000/PKG |
vp-scientific |
|
VP 719F-2 |
PTFE ENCAPSULATED VP 719F SUPER TUMBLE STIR DISCS – 9.46mm DIAMETER, 1.45mm THICK – 100/PKG |
vp-scientific |
|
VP 720 |
TUMBLE STIR DISCS – 9.53mm DIAMETER, 0.51mm THICK – 1000/PKG |
vp-scientific |
|
VP 720A |
DROP DISPENSER – 24 HOLES FOR VP 720 STIR DISCS |
vp-scientific |
|
VP 720B |
AUTOCLAVEABLE DROP DISPENSER – 48 HOLES FOR VP 720 STIR DISCS |
vp-scientific |
|
VP 720C |
AUTOCLAVEABLE FLIP DISPENSER – 24 HOLES FOR VP 720 |
vp-scientific |
|
VP 720D |
AUTOCLAVEABLE FLIP DISPENSER – 48 HOLES FOR VP 720 |
vp-scientific |
|
VP 720F |
SUPER TUMBLE STIR DISCS – 9.53mm DIAMETER, 0.635mm THICK – 1000/PKG |
vp-scientific |
|
VP 720F-1 |
PARYLENE COATED VP 720F SUPER TUMBLE STIR DISCS – 9.58mm DIAMETER, 0.68mm THICK – 1000/PKG |
vp-scientific |
|
VP 721A-48S |
DROP DISPENSER – 48 HOLES (ON 13.0 MM CENTERS) FOR VP 721F AND VP 721F-1 STIR DISCS, STAINLESS STEEL PLENUM DOES NOT MOVE AND HAS TRIGGER RELEASE MECHANISM, STEEL PLENUM HOLE DIAMETER = 5.7 MM |
vp-scientific |
|
VP 721A-48SD |
Drop Dispenser – 48 Holes (On 13.0mm Centers) For VP 721F And VP 721F-1 Stir Discs, Stainless Steel Plenum Does Not Move And Has Trigger Release Mechanism, Steel Plenum Hole Diameter = 0.225″, Collar Shortened To 1/16, With 6 Locating Thumb Screws For Dee |
vp-scientific |
|
VP 721A-4S |
DROP DISPENSER – 96 HOLES FOR VP 721F AND VP 721F-1 STIR DISCS – IMPROVED DESIGN |
vp-scientific |
|
VP 721B |
AUTOCLAVEABLE FLIP DISPENSER – 96 HOLES FOR VP 721F AND VP 721F-1 STIR DISCS |
vp-scientific |
|
VP 721D |
AUTOCLAVEABLE DROP DISPENSER FOR VP 721F, VP 721F-1 AND VP 722-1 STIR DISCS INTO 96 WELL MICROPLATES |
vp-scientific |
|
VP 721F |
SUPER TUMBLE STIR DISCS – 5.08mm DIAMETER, 0.61mm THICK – 1000/PKG |
vp-scientific |
|
VP 721F-1 |
PARYLENE COATED VP 721F SUPER TUMBLE STIR DISCS – 5.13mm DIAMETER, 0.68mm THICK – 1000/PKG |
vp-scientific |
|
VP 722A |
DROP DISPENSER – 96 HOLES FOR VP 722F AND VP 722F-1 STIR DISCS |
vp-scientific |
|
VP 722B |
AUTOCLAVEABLE FLIP DISPENSER – 96 HOLES FOR VP 722F AND VP 722F-1 STIR DISCS |
vp-scientific |
|
VP 722F |
TUMBLE STIR DISCS – 3.35mm DIAMETER, 0.61mm THICK – 1000/PKG |
vp-scientific |
|
VP 722F-1 |
PARYLENE COATED VP 722F SUPER TUMBLE STIR DISCS – 3.46mm DIAMETER, 0.68mm THICK – 1000/PKG |
vp-scientific |
|
VP 722F-2B |
AUTOCLAVEABLE FLIP DISPENSER – 96 HOLES FOR VP 722F-2 PTFE STIR DISCS |
vp-scientific |
|
VP 722F-2D |
AUTOCLAVEABLE 96 DROP DISPENSER FOR VP 722F-2 PTFE ENCAPSULATED STAINLESS STEEL STIR DISCS INTO 96 WELL MICROPLATES |
vp-scientific |
|
VP 724A |
DROP DISPENSER – 384 HOLES FOR VP 724 STIR DISCS |
vp-scientific |
|
VP 724B |
AUTOCLAVEABLE FLIP DISPENSER – 384 HOLES FOR VP 724 |
vp-scientific |
|
VP 724D-1 |
AUTOCLAVEABLE 384 DROP DISPENSER FOR VP 724F AND VP 724F-1 STIR DISCS INTO 384 WELL MICROPLATES |
vp-scientific |
|
VP 724F |
TUMBLE STIR DISCS – 1.78mm DIAMETER, 0.635mm THICK – 1000/PKG |
vp-scientific |
|
VP 724F-1 |
PARYLENE COATED VP 721F SUPER TUMBLE STIR DISCS – 1.87mm DIAMETER, 0.68mm THICK – 1000/PKG |
vp-scientific |
|
VP 725 |
LEVITATION STIR BALLS – 2.38mm DIAMETER FOR 384 WELL PLATES – 1000/PKG |
vp-scientific |
|
VP 725-1 |
PARYLENE COATED VP 725 LEVITATION STIR BALLS – 2.47mm DIAMETER FOR 384 WELL PLATES – 1000/PKG |
vp-scientific |
|
VP 725-1-40 |
PARYLENE COATED VP 725 LEVITATION STIR BALLS – 2.47mm DIAMETER FOR 384 WELL PLATES – 40,000/BTL |
vp-scientific |
|
VP 725-1S |
STERILE PARYLENE COATED VP 725 LEVITATION STIR BALLS – 2.47mm DIAMETER FOR 384 DEEP WELL PLATES – 1000/PKG |
vp-scientific |
|
VP 725-1S-40 |
STERILE PARYLENE COATED VP 725 LEVITATION STIR BALLS – 2.47mm DIAMETER- 40,000/BTL |
vp-scientific |
|
VP 725-1S-5 |
STERILE PARYLENE COATED VP 725 LEVITATION STIR BALLS – 2.47mm DIAMETER, 5,000/BOTTLE |
vp-scientific |
|
VP 725-1S-9 |
STERILE PARYLENE COATED STAINLESS STEEL STIR BALLS – 2.47mm DIAMETER – 9000/BTL |
vp-scientific |
|
VP 72 |
DROP DISPENSER – 384 HOLES – LOADS 2.38mm DIAMETER BALLS FOR VP 725, VP 725S, VP 725-1 AND VP725-1S INTO DEEP WELL 384 MICROPLATES |
vp-scientific |
|
VP 72-1-96S |
DROP DISPENSER – 96 HOLES – LOADS 2.38mm DIAMETER BALLS FOR VP 725, VP 725S, VP 725-1 AND VP 725-1S INTO DEEP WELL 96 MICROPLATES – NEW DESIGN TOP PLATE FIXED AND BOTTOM PLATE MOVES |
vp-scientific |
|
VP 72-1-96SC |
Alignment collar for VP 72-1-96S Dispenser. Registers to a 96-vial Symyx Block (SBS footprint) with 8mm OD x 40mm height glass vials. |
vp-scientific |
|
VP 725B |
AUTOCLAVEABLE FLIP DISPENSER – LOADS 384 DEEP WELL MICROPLATES – 2.38mm DIAMETER BALLS LOAD INTO ARRAY OF 16 x 24 ON 4.5mm CENTERS |
vp-scientific |
|
VP 725B-96 |
AUTOCLAVEABLE FLIP DISPENSER – LOADS 96 WELL MICROPLATES – 2.38mm DIAMETER BALLS LOAD INTO ARRAY OF 8 x 12 ON 9mm CENTERS |
vp-scientific |
|
VP 725C |
AUTOMATIC DISPENSER THAT LOADS VP 725, VP 725S, VP 725-1 AND VP 725-1S STAINLESS STEEL BALLS |
vp-scientific |
|
VP 725C-96 |
AUTOCLAVEABLE HIGH VOLUME SEMI-AUTOMATIC DROP DISPENSER THAT LOADS VP 725, VP 725S, VP 725-1 AND VP 725-1S balls INTO 96 DEEP WELL MICROPLATES |
vp-scientific |
|
VP 725D |
AUTOCLAVEABLE DROP DISPENSER – LOADS VP 725, VP 725S, VP 725-1 AND VP 725-1S STAINLESS STEEL BALLS INTO 384 DEEP WELL MICROPLATES |
vp-scientific |
|
VP 725E |
LEVITATION STIR BALLS – 3.97mm DIAMETER FOR 96 ROUND WELL PLATES – 1000/PKG |
vp-scientific |
|
VP 725E-1 |
PARYLENE COATED VP 725E LEVITATION STIR BALLS – 4.06mm DIAMETER FOR 96 ROUND WELL PLATES – 1000/PKG |
vp-scientific |
|
VP 725E-1S |
STERILE PARYLENE COATED VP 725E LEVITATION STIR BALLS – 4.06mm DIAMETER FOR 96 ROUND WELL PLATES – 10,000/BOTTLE |
vp-scientific |
|
VP 725EA |
DROP DISPENSER – FOR 3.97mm DIAMETER STIR BALLS – 96 WELL FORMAT LOADS VP 725E, VP 725ES, VP 725E-1, AND VP 725E-1S STAINLESS STEEL BALLS FOR 96 DEEP WELL MICROPLATES |
vp-scientific |
|
VP 725EA-48-1 |
DROP DISPENSER – 48 HOLES – LOADS TWO 3.97mm DIAMETER BALLS, 1S VP 725E, VP 725ES, VP 725E-1 AND VP 725E-1S INTO 48 WELL MICROPLATES |
vp-scientific |
|
VP 725EB |
AUTOCLAVEABLE FLIP DISPENSER – FOR 3.97mm DIAMETER STIR BALLS – 96 WELL FORMAT – LOADS VP 725E, VP 725ES, VP 725E-1 AND VP 725E-1S STAINLESS STEEL BALLS FOR 96 DEEP WELL MICROPLATES |
vp-scientific |
|
VP 725EC |
AUTOMATIC DISPENSER – THAT LOADS VP 725E, VP 725ES, VP 725E-1, AND VP 725E-1S STAINLESS STEEL BALLS |
vp-scientific |
|
VP 725ES |
STERILE LEVITATION VP 725E STIR BALLS – 3.97mm DIAMETER FOR 96 ROUND WELL PLATES – 10,000/BOTTLE |
vp-scientific |
|
VP 725F |
LEVITATION STIR BALLS – 4.76mm DIAMETER FOR SQUARE 96 WELL PLATES – 1000/PKG |
vp-scientific |
|
VP 725F-1 |
PARYLENE COATED LEVITATION STIR BALLS – 4.85mm DIAMETER FOR SQUARE 96 WELL PLATES – 1000/PKG |
vp-scientific |
|
VP 725F-1-1S |
Sterile Parylene Coated Levitation Stir Balls, 4.85mm Diameter For Square 96 Well Plates, 1,000/Bottle |
vp-scientific |
|
VP 725F-1S |
STERILE PARYLENE COATED LEVITATION STIR BALLS – 4.85mm DIAMETER FOR SQUARE 96 WELL PLATES – 10,000/BOTTLE |
vp-scientific |
|
VP 725FA |
DROP DISPENSER – THAT LOADS VP 725F, VP 725FS, VP 725F-1 AND VP 725F-1S STAINLESS STEEL BALLS FOR 96 DEEP WELL MICROPLATES |
vp-scientific |
|
VP 725FB |
AUTOCLAVEABLE FLIP DISPENSER – THAT LOADS VP 725F, VP 725FS, VP 725F-1, AND VP 725F-1S STAINLESS STEEL BALLS FOR 96 DEEP WELL MICROPLATES |
vp-scientific |
|
VP 725FB-48DW |
– |
vp-scientific |
|
VP 725FC |
AUTOMATIC DISPENSER – THAT LOADS VP 725F, VP 725FS, VP 725F-1, AND VP 725F-1S STAINLESS STEEL BALLS |
vp-scientific |
|
VP 725FD |
AUTOCLAVEABLE DROP DISPENSER – THAT LOADS ALL VP 725E SERIES AND VP 725F SERIES STEEL BALLS FOR 96 DEEP WELL MICROPLATES, EACH |
vp-scientific |
|
VP 725FS |
STERILE LEVITATION STIR BALLS – 4.76mm DIAMETER FOR SQUARE 96 WELL PLATES – 10,000/BOTTLE |
vp-scientific |
|
VP 725G |
LEVITATION STIR BALLS – 5.56mm DIAMETER FOR SQUARE 96 WELL PLATES – 1000/PKG |
vp-scientific |
|
VP 725G-2 |
LEVITATION STIR BALLS PTFE DIPPED – 5.57mm DIAMETER FOR SQUARE 96 WELL PLATES – 100/PKG |
vp-scientific |
|
VP 725PS |
Stir Ball, 12mm diameter sphere, PTFE Encapsulated 6mm long x 6mm diameter cylinder Alnico Magnet, 5.5MGO, 10/pkg |
vp-scientific |
|
VP 725RS |
RECYCLED STERILE LEVITATION STIR BALLS – 2.38mm DIAMETER FOR 384 DEEP WELL PLATES – 50,000/BOTTLE |
vp-scientific |
|
VP 725S |
STERILE LEVITATION STIR BALLS – 2.38mm DIAMETER FOR 384 DEEP WELL PLATES – 10,000/BOTTLE |
vp-scientific |
|
VP 725ZB-4 |
Arabadopsis Seed Loader designed to dispense one seed, approximay 0.5 mm long by 0.3 mm wide, into each well of a 96 well microplate. |
vp-scientific |
|
VP 725ZB-4A |
Insert accessory to accommodate the Nunc microplate #278012 that was used in Dr. Patrick Krysan’s “A High-Throughput Method for Capturing Plant Tissue Samples for Genotype Analysis” experiment. |
vp-scientific |
|
VP 730 |
HUMIDITY CHAMBER – FOR MAGNETIC STIRRER |
vp-scientific |
|
VP 730A |
WATER RESERVOIR/TRAY – FOR ALLIGATOR TUMBLE STIRRER |
vp-scientific |
|
VP 731 |
TUMBLE POWDER – 0.7 MICRON PARTICLES – 10g IN AN AQUEOUS SLURRY |
vp-scientific |
|
VP 733 |
STAINLESS STEEL STIR STIX – 1.58mm DIAMETER, 31.8mm LONG – 100/PKG |
vp-scientific |
|
VP 733-2 |
PTFE ENCAPSULATED S/S TUBE – 2.5 +/- .05mm DIAMETER , 34.6mm +/- .2mm LONG – 100/PKG |
vp-scientific |
|
VP 733-2A |
AUTOCLAVEABLE DROP DISPENSER THAT LOADS VP 733-2, VP 734-2 AND VP 735-2 PTFE COATED STIR STIXS INTO 96 DEEP WELL MICROPLATES |
vp-scientific |
|
VP 733-2A-1 |
ALIGNMENT COLLAR FOR 96 TUBE RACKS |
vp-scientific |
|
VP 733-2B |
AUTOCLAVEABLE FLIP DISPENSER THAT LOADS VP 733-2, VP 734-2 AND VP 735-2 PTFE COATED STIR STIXS INTO 96 DEEP WELL MICROPLATES |
vp-scientific |
|
VP 733-3A |
AUTOCLAVEABLE DROP DISPENSER THAT LOADS VP 733-2, VP 734-2 AND VP 735-2 PTFE COATED STIR STIXS INTO 48 TEST TUBES (12 mm DIAMETER, 75 mm LONG ON 14 mm CENTERS) |
vp-scientific |
|
VP 734 |
STAINLESS STEEL STIR STIX – 1.58mm DIAMETER, 25.4mm LONG – 100/PKG |
vp-scientific |
|
VP 734-2 |
PTFE ENCAPSULATED STIR STIX – 2.5 +/- .05mm DIAMETER, 28.2mm +/- .2mm LONG – 100/PKG |
vp-scientific |
|
VP 735 |
STAINLESS STEEL STIR STIX – 1.58mm DIAMETER, 19mm LONG – 100/PKG |
vp-scientific |
|
VP 735-2 |
PTFE ENCAPSULATED S/S TUBE DIAMETER = 2.5 +/- .05mm, LENGTH = 21.8mm +/- .2mm, 100/PKG |
vp-scientific |
|
VP 736 |
STAINLESS STEEL STIR STIX – 0.787mm DIAMETER, 12.7mm LONG – 100/PKG |
vp-scientific |
|
VP 736-1 |
PARYLENE COATED VP 736 STIR STIXS 0.89 mm DIAMETER AND 12.80 mm LONG, 100/ PKG |
vp-scientific |
|
VP 736-384A |
AUTOCLAVEABLE DROP DISPENSER THAT LOADS VP 736 AND VP 736-1 (.787mm DIAMETER AND 12.5mm LONG) AND VP 736-1 (0.89mm DIAMETER AND 12.8mm LONG) STIR STIXS INTO 384 WELL MICROPLATES, INCLUDES VP 771 MAGNET, SIMILAR TO VP 736A BUT MADE FOR 384 WELL SBS PLATE |
vp-scientific |
|
VP 736A |
AUTOCLAVEABLE DROP DISPENSER THAT LOADS VP 736 AND VP 736-1 STIR STIXS INTO 96 PCR MICROPLATES, INCLUDES VP 771 |
vp-scientific |
|
VP 737 |
STAINLESS STEEL STIR STIX – 0.787mm DIAMETER, 7.6mm LONG – 1000/PKG |
vp-scientific |
|
VP 737-1 |
STAINLESS STEEL STIR STIX – 0.89mm DIAMETER, 7.8mm LONG – 1000/PKG |
vp-scientific |
|
VP 737A |
– |
vp-scientific |
|
VP 740 |
STIR STIX UNLOADER WITH CATCH BASIN |
vp-scientific |
|
VP 740B |
COLLAR FOR ALIGNING MICRONIC BLOCKS TO VP 540A2 AND VP 540AC |
vp-scientific |
|
VP 740C |
ADAPTOR TO HOLD VP 540DB ON THE STIR STIX CATCH BASIN HOLDER |
vp-scientific |
|
VP 741-I |
BOTTOM, SIDE AND END HEAT CONDUCTING ALUMINUM SPACERS FOR VP 741 AND VP 743 HEATING BLOCK TO FIT ABGENE'S #AB 0661 DEEP WELL MICROPLATE |
vp-scientific |
|
VP 741ABW-R-MA |
Heating Block, deep chamber for microplates or racks of tubes or vials, special design to minimize Eddy currents, Watlow PID controller, temperature range 25 to 200C, 120V, 19mm Mica SBS adaptor on bottom. |
vp-scientific |
|
VP 741ABW-R-MB |
Heating Block, deep chamber for microplates or racks of tubes or vials, special design to minimize Eddy currents, Watlow PID controller, temperature range 25 to 200C, 120V, 12.5mm Mica SBS adaptor on bottom. |
vp-scientific |
|
VP 741ABW-RCE-MA |
Heating Block, deep chamber for microplates or racks of tubes or vials, special design to minimize Eddy currents, Watlow PID controller, temperature range 25 to 200C, 230V, 19mm Mica SBS adaptor on bottom. |
vp-scientific |
|
VP 741ABW-RCE-MB |
Heating Block, deep chamber for microplates or racks of tubes or vials, special design to minimize Eddy currents, Watlow PID controller, temperature range 25 to 200C, 230V, 12.5mm Mica SBS adaptor on bottom. |
vp-scientific |
|
VP 741AJ |
Insulating jacket for VP 741A Heat Blocks, polycarbonate, with SBS-dimensioned accepting pocket on inside bottom to locate heat block via attached SBS MICA adaptor. |
vp-scientific |
|
VP 741AW-R-MA |
Heating Block, deep chamber for microplates or racks of tubes or vials, Watlow PID controller, temperature range 25 to 200C, 120V, 19mm Mica SBS adaptor on bottom. |
vp-scientific |
|
VP 741AW-R-MB |
Heating Block, deep chamber for microplates or racks of tubes or vials, Watlow PID controller, temperature range 25 to 200C, 120V, 12.5mm Mica SBS adaptor on bottom. |
vp-scientific |
|
VP 741AW-RCE-MA |
Heating Block, deep chamber for microplates or racks of tubes or vials, Watlow PID controller, temperature range 25 to 200C, 230V, 19mm Mica SBS adaptor on bottom. |
vp-scientific |
|
VP 741AW-RCE-MB |
Heating Block, deep chamber for microplates or racks of tubes or vials, Watlow PID controller, temperature range 25 to 200C, 230V, 12.5mm Mica SBS adaptor on bottom. |
vp-scientific |
|
VP 741BBW-R-MA |
Heating Block, shallow chamber for microplates or racks of tubes or vials, special design to minimize Eddy currents, Watlow PID controller, temperature range 25 to 200C, 120V, 19mm Mica SBS adaptor on bottom. |
vp-scientific |
|
VP 741BBW-R-MB |
Heating Block, shallow chamber for microplates or racks of tubes or vials, special design to minimize Eddy currents, Watlow PID controller, temperature range 25 to 200C, 120V, 12.5mm Mica SBS adaptor on bottom. |
vp-scientific |
|
VP 741BBW-RCE-MA |
Heating Block, shallow chamber for microplates or racks of tubes or vials, special design to minimize Eddy currents, Watlow PID controller, temperature range 25 to 200C, 230V, 19mm Mica SBS adaptor on bottom. |
vp-scientific |
|
VP 741BBW-RCE-MB |
Heating Block, shallow chamber for microplates or racks of tubes or vials, special design to minimize Eddy currents, Watlow PID controller, temperature range 25 to 200C, 230V, 12.5mm Mica SBS adaptor on bottom. |
vp-scientific |
|
VP 741BW-R-MA |
Heating Block, shallow chamber for microplates or racks of tubes or vials, Watlow PID controller, temperature range 25 to 200C, 120V, 19mm Mica SBS adaptor on bottom. |
vp-scientific |
|
VP 741BW-R-MB |
Heating Block, shallow chamber for microplates or racks of tubes or vials, Watlow PID controller, temperature range 25 to 200C, 120V, 12.5mm Mica SBS adaptor on bottom. |
vp-scientific |
|
VP 741BW-RCE-MA |
Heating Block, shallow chamber for microplates or racks of tubes or vials, Watlow PID controller, temperature range 25 to 200C, 230V, 19mm Mica SBS adaptor on bottom. |
vp-scientific |
|
VP 741BW-RCE-MB |
Heating Block, shallow chamber for microplates or racks of tubes or vials, Watlow PID controller, temperature range 25 to 200C, 230V, 12.5mm Mica SBS adaptor on bottom. |
vp-scientific |
|
VP 741GZ-64 |
Heat Block, 64 positions for 50ml conical tubes, graphite for combination heating and stirring, Watlow PID controller, temperature range 25 to 125C, 120V. |
vp-scientific |
|
VP 741GZ-64CE |
Heat Block, 64 positions for 50ml conical tubes, graphite for combination heating and stirring, Watlow PID controller, temperature range 25 to 125C, 220V. |
vp-scientific |
|
VP 741I6A |
96 PCR PLATE HEATING BLOCK/REGISTRATION BLOCK, SBS FOOT PRINT TAPERED HOLES |
vp-scientific |
|
VP 741I6B |
CUSTOM ALUMINUM HEAT TRANSFER BASE FOR ABGENE (#AB093) 96 DEEP WELL MICROPLATE, SBS FOOTPRINT, SCULPTED TO CLOSELY FOLLOW THE OUTSIDE CONTOURS OF THE PLATE BOTTOM. CAN BE USED ON VP 741BW-R OR ON COMMERCIALLY AVAILABLE DRY BATH HEATING UNITS |
vp-scientific |
|
VP 741I6C |
Aluminum Heat Transfer Plate For Abgene (#AB 0661) Or Other Deep Well Microplate, SBS Footprint, Sculpted To Closely Follow The Outside Contours Of The Plate Bottom, For Use With VP 741, VP 741A-R And VP 743 Deep Well |
vp-scientific |
|
VP 743AW-R-MB-1 |
Aluminum Heating Block for three deep well microplates or racks of glass vials, temperature control 25 to 200° C with RTD, Watlow Controller, 120 Volt, Mica insulation on bottom for VP 710E-2HM Magnetic Tumble Stirrer. |
vp-scientific |
|
VP 743AW-R-MB-1CE |
Aluminum Heating Block for three deep well microplates or racks of glass vials, temperature control 25 to 200° C with RTD, Watlow Controller, 230 Volt, CE compliant, Mica insulation on bottom for VP 710E-2HM Magnetic Tumble Stirrer. |
vp-scientific |
|
VP 744 |
Heater/Chiller Recirculating Fluid Block with SBS locating feature on the bottom. |
vp-scientific |
|
VP 744A |
Heater/Chiller Recirculating Fluid Block with SBS locating feature on the bottom and SBS microplate accepting pocket on the faceplate. |
vp-scientific |
|
VP 744B-MB |
Heater/Chiller Recirculating Fluid Block for deep well or standard microplates. Special design to minimize eddy currents when used on a Tumble Stirrer. |
vp-scientific |
|
VP 745 |
HEATER/CHILLER RECIRCULATING FLUID BLOCK FOR VP 750 BUBBLE PADDLE STIRRER |
vp-scientific |
|
VP 749-9-32-105 |
– |
vp-scientific |
|
VP 750 |
POLYPROPYLENE BUBBLE PADDLE RESERVOIR; INCLUDES 4 PARYLENE COATED STAINLESS STEEL BUBBLE PADDLES WITH 13 BUBBLES FOR 96 PIPETTES |
vp-scientific |
|
VP 750-13-AL |
ANODIZED ALUMINUM BUBBLE PADDLE RESERVOIR; INCLUDES 1 PARYLENE COATED STAINLESS STEEL BUBBLE PADDLE WITH 13 BUBBLES AND 2 PTFE HUBS; MIXES 70ml |
vp-scientific |
|
VP 750-13-PP |
Bubble Paddle Reservoir, 12-channel format, polypropylene, stirred by Tumble Stirrer, includes 1 stainless steel bubble paddle with 13 bubbles and 2 PTFE hubs, mixes 70 ml. |
vp-scientific |
|
VP 750-13-PTFE |
PTFE BUBBLE PADDLE RESERVOIR, 12-CHANNEL FORMAT; INCLUDES 1 STAINLESS STEEL BUBBLE PADDLE WITH 13 BUBBLES AND 2 PTFE HUBS; MIXES 70ml |
vp-scientific |
|
VP 750-ECON-6 |
ECONOMY BUBBLE PADDLE RESERVOIR MADE WITH A DISPOSABLE NALGENE RESERVOIR (VP 792D) AND FOUR 11 BUBBLE PADDLES (VP 757FE-1) IN A POLYCARBONATE FRAME CONTAINING PTFE BEARINGS. |
vp-scientific |
|
VP 750-ECON-6A |
Economy Bubble Paddle Reservoir made with Nalgene disposable polypropylene. SBS footprint with 6 bubble paddles (7 bubbles/paddle) and polycarbonate frame with PTFE bearings for the bubble paddles. |
vp-scientific |
|
VP 750ACFeP |
BUBBLE PADDLE, 13 BUBBLES ON 9mm CENTERS, CONSTRUCTED FROM PASSIVATED STAINLESS STEEL AND COATED WITH PARYLENE, MAGNETIC CLUTCH AND PTFE HUB |
vp-scientific |
|
VP 750AFeP |
BUBBLE PADDLE, 13 BUBBLES ON 9mm CENTERS, CONSTRUCTED FROM PASSIVATED STAINLESS STEEL AND COATED WITH PARYLENE WITH 2 PTFE HUBS |
vp-scientific |
|
VP 750AL |
Aluminum Bubble Paddle Reservoir For 96 Pipettes – Includes 4 VP 757AFe Bubble Paddles. Reservoir Has SBS Dimensions And A Peltier Adaptor Feature On The Bottom |
vp-scientific |
|
VP 750AL-2 |
Hydrophilic-Coated Aluminum Reservoir. 127.7mm long, 85.5mm wide, 50mm tall. Flat Bottom, designed to hold VP 750P-ECON-5F Polycarbonate Frame with four VP 757AFe Bubble Paddles |
vp-scientific |
|
VP 750D |
DELRIN MAGNETIC BUBBLE PADDLE RESERVOIR FOR 96 PIPETTOR, INCLUDES 4 PARYLENE COATED STAINLESS STEEL BUBBLE PADDLES |
vp-scientific |
|
VP 750D-SBS |
DELRIN BUBBLE PADDLE RESERVOIR – INCLUDING 4 BUBBLE PADDLES WITH 13 BUBBLES FOR 96 PIPETTES WITH SBS FEATURE ON THE BOTTOM |
vp-scientific |
|
VP 750PTFE |
PTFE BUBBLE PADDLE RESERVOIR – INCLUDING 4 BUBBLE PADDLES WITH 13 BUBBLES FOR 96 PIPETTES |
vp-scientific |
|
VP 750PTFE-SBS |
PTFE BUBBLE PADDLE RESERVOIR – INCLUDING 4 BUBBLE PADDLES WITH 13 BUBBLES FOR 96 PIPETTES WITH SBS FEATURE ON THE BOTTOM |
vp-scientific |
|
VP 751AFe |
BUBBLE PADDLE, 7 BUBBLES ON 9 mm CENTERS, CONSTRUCTED FROM PASSIVATED STAINLESS STEEL WITH 2 PTFE HUBS |
vp-scientific |
|
VP 754CFe |
BUBBLE PADDLE, 17 BUBBLES ON 4.5mm CENTERS, CONSTRUCTED FROM PASSIVATED STAINLESS STEEL, MAGNETIC CLUTCH |
vp-scientific |
|
VP 754CMP |
MINIATURE POLYPROPYLENE RESERVOIR WITH DUCTED BOTTOM FOR 16 PIPETTES INCLUDING STAINLESS STEEL PADDLE WITH 17 BUBBLES AND MAGNETIC CLUTCH, WITH INLET AND OUTLET NIPPLES, MIXES 13ml |
vp-scientific |
|
VP 754V-50 |
Vertical Bubble Paddle stirrer to stir magnetic beads and keep them in suspension in a 50ml tube. |
vp-scientific |
|
VP 75CAL |
BUBBLE PADDLE, 25 BUBBLES ON 4.5mm CENTERS, CONSTRUCTED FROM ANODIZED ALUMINUM, MAGNETIC CLUTCH AND PTFE HUB |
vp-scientific |
|
VP 75CFe |
Bubble Paddle, 25 Bubbles On 4.5mm Centers, Constructed From Passivated Stainless Steel, Magnetic Clutch And PTFE Hub |
vp-scientific |
|
VP 75CFeP |
BUBBLE PADDLE, 25 BUBBLES ON 4.5mm CENTERS, CONSTRUCTED FROM PASSIVATED STAINLESS STEEL AND COATED WITH PARYLENE, MAGNETIC CLUTCH AND PTFE HUB |
vp-scientific |
|
VP 75Fe-1 |
Economy Bubble Paddle for disposable SBS polypropylene reservoir (VP 578DC), 8 bubble paddles with PTFE bearings for the bubble paddles. |
vp-scientific |
|
VP 75FeP |
BUBBLE PADDLE, 25 BUBBLES ON 4.5mm CENTERS, CONSTRUCTED FROM PASSIVATED STAINLESS STEEL AND COATED WITH PARYLENE WITH 2 PTFE HUBS |
vp-scientific |
|
VP 75L |
ANODIZED ALUMINUM 8 MAGNETIC CLUTCH BUBBLE PADDLE RESERVOIR FOR 16 ROWS OF 24 PIPETTES, WITH DUCTED BOTTOMS TO CONFORM TO 8, PADDLES WITH 25 BUBBLE PADDLES EACH |
vp-scientific |
|
VP 755C-384C |
Delrin Reservoir With 8 Magnetic Clutch Bubble Paddles For 16 Rows Of 24 Pipettes, With Ducted Bottoms To Conform To 8 Paddles With 25 Bubbles Each, Inlet And Outlets With Screw Adjustable Overflow Weir And Aluminum Base For Strength And Heat Exchange |
vp-scientific |
|
VP 755D |
DELRIN BUBBLE PADDLE RESERVOIR INCLUDING 8 BUBBLE PADDLES WITH 25 BUBBLES FOR 384 PIPETTES |
vp-scientific |
|
VP 755D-1 |
DELRIN BUBBLE PADDLE RESERVOIR INCLUDING 8 BUBBLE PADDLES WITH 25 BUBBLES FOR 384 PIPETTES, SBS FEATURE MACHINED INTO BASE |
vp-scientific |
|
VP 756 |
POLYPROPYLENE BUBBLE PADDLE RESERVOIR INCLUDING 1 PARYLENE COATED STAINLESS STEEL BUBBLE PADDLE WITH 9 BUBBLES WITH 2 PTFE HUBS, MIXES 25ml |
vp-scientific |
|
VP 756A |
POLYPROPYLENE BUBBLE PADDLE RESERVOIR; INCLUDES 1 PARYLENE COATED STAINLESS STEEL BUBBLE PADDLE WITH 9 BUBBLES AND 2 PTFE HUBS; MIXES 50ml |
vp-scientific |
|
VP 756A-2 |
DELRIN BUBBLE PADDLE RESERVOIR INCLUDING 2 PARYLENE COATED STAINLESS STEEL BUBBLE PADDLE WITH 9 BUBBLES WITH 4 PTFE HUBS, MIXES 75 ml |
vp-scientific |
|
VP 756A-LID |
Polypropylene lid for the VP 756A, slotted to allow for pipette tips to access reservoir. |
vp-scientific |
|
VP 756ACAL |
BUBBLE PADDLE, 9 BUBBLES ON 9mm CENTERS, CONSTRUCTED FROM ANODIZED ALUMINUM, MAGNETIC CLUTCH AND PTFE HUB |
vp-scientific |
|
VP 756ACFeP |
BUBBLE PADDLE, 9 BUBBLES ON 9mm CENTERS, CONSTRUCTED FROM PASSIVATED STAINLESS STEEL AND COATED WITH PARYLENE, MAGNETIC CLUTCH AND PTFE HUB |
vp-scientific |
|
VP 756AFeP |
BUBBLE PADDLE, 9 BUBBLES ON 9mm CENTERS; CONSTRUCTED FROM PASSIVATED STAINLESS STEEL AND COATED WITH PARYLENE WITH 2 PTFE HUBS |
vp-scientific |
|
VP 756C-1 |
IMPROVED DELRIN RESERVOIR WITH DUCTED BOTTOM FOR 8 PIPETTES INCLUDING PARYLENE COATED STAINLESS STEEL BUBBLE PADDLE WITH 9 BUBBLES AND MAGNETIC CLUTCH, MIXES 50ml |
vp-scientific |
|
VP 756C-1P |
IMPROVED POLYPROPYLENE RESERVOIR WITH DUCTED BOTTOM FOR 8 PIPETTES INCLUDING PARYLENE COATED STAINLESS STEEL BUBBLE PADDLE WITH 9 BUBBLES AND MAGNETIC CLUTCH, MIXES 50ml |
vp-scientific |
|
VP 756C-1P100 |
IMPROVED POLYPROPYLENE RESERVOIR WITH DUCTED BOTTOM FOR 8 PIPETTES INCLUDING PARYLENE COATED STAINLESS STEEL BUBBLE PADDLE WITH 9 BUBBLES AND MAGNETIC CLUTCH, MIXES 100ml |
vp-scientific |
|
VP 756C-1P100T |
IMPROVED POLYPROPYLENE RESERVOIR WITH DUCTED BOTTOM FOR 8 PIPETTES INCLUDING PARYLENE COATED STAINLESS STEEL BUBBLE PADDLE WITH 9 BUBBLES AND MAGNETIC CLUTCH, WITH INLET AND OUTLET NIPPLES, MIXES 100ml, |
vp-scientific |
|
VP 756C-1PD |
IMPROVED POLYPROPYLENE RESERVOIR WITH SPA BEAD DUCTED BOTTOM. DRAIN TUBE INSERTED IN BOTTOM DUCTING CONNECTED TO OUTLET, INCLUDES PASSIVATED STAINLESS STEEL PADDLE COATED WITH PARYLENE. PADDLE HAS 9 BUBBLES AND MAGNETIC CLUTCH, MIXES 50ml |
vp-scientific |
|
VP 756C-1PT |
IMPROVED POLYPROPYLENE RESERVOIR WITH DUCTED BOTTOM FOR 8 PIPETTES INCLUDING PARYLENE COATED STAINLESS STEEL PADDLE WITH 9 BUBBLES AND MAGNETIC CLUTCH, WITH INLET AND OUTLET NIPPLES, MIXES 50 ml |
vp-scientific |
|
VP 756C-1PTFE100 |
Improved PTFE Reservoir With Ducted Bottom For 8 Pipettes Including Parylene Coated Stainless Steel Bubble Paddle With 9 Bubbles And Magnetic Clutch, Mixes 100ml |
vp-scientific |
|
VP 756C-1T |
IMPROVED DELRIN RESERVOIR WITH DUCTED BOTTOM FOR 8 PIPETTES INCLUDING PARYLENE COATED STAINLESS STEEL PADDLE WITH 9 BUBBLES AND MAGNETIC CLUTCH, WITH INLET AND OUTLET NIPPLES, MIXES 50 ml |
vp-scientific |
|
VP 756C-96BPTFE |
PTFE MAGNETIC CLUTCH BUBBLE PADDLE RESERVOIR FOR 96 PIPETTOR, INCLUDES 4 PARYLENE COATED STAINLESS STEEL BUBBLE PADDLES, WITH INLET AND OUTLET NIPPLES AND LIQUID LEVEL CONTROL SYSTEM. |
vp-scientific |
|
VP 756C-96BPTFE-FB |
PTFE MAGNETIC CLUTCH BUBBLE PADDLE RESERVOIR FOR 96 PIPETTOR, INCLUDES 4 PARYLENE COATED STAINLESS STEEL BUBBLE PADDLES, OVER FLOW WEIR AND INLET, FLAT BOTTOM (NO CHANNELS) WITH ROUNDED EDGES |
vp-scientific |
|
VP 756CM-P |
MINIATURE POLYPROPYLENE RESERVOIR WITH DUCTED BOTTOM FOR 8 PIPETTES INCLUDING PARYLENE COATED STAINLESS STEEL PADDLE WITH 9 BUBBLES AND MAGNETIC CLUTCH, WITH INLET AND OUTLET NIPPLES, MIXES 15ml |
vp-scientific |
|
VP 756CM-P0 |
MINIATURE POLYPROPYLENE RESERVOIR WITH DUCTED BOTTOM FOR 8 PIPETTES INCLUDING PARYLENE COATED STAINLESS STEEL PADDLE WITH 9 BUBBLES AND MAGNETIC CLUTCH, WITH NO NIPPLES, MIXES 15ml |
vp-scientific |
|
VP 756CM-P1 |
MINIATURE POLYPROPYLENE RESERVOIR WITH DUCTED BOTTOM FOR 8 PIPETTES INCLUDING PARYLENE COATED STAINLESS STEEL PADDLE WITH 9 BUBBLES AND MAGNETIC CLUTCH, WITH A SINGLE INLET NIPPLE, MIXES 15ml |
vp-scientific |
|
VP 756CP-96B |
DELRIN MAGNETIC CLUTCH BUBBLE PADDLE RESERVOIR FOR 96 PIPETTOR, INCLUDES 6 PARYLENE COATED STAINLESS STEEL BUBBLE PADDLES |
vp-scientific |
|
VP 756CP-96BPTFE |
PTFE MAGNETIC CLUTCH BUBBLE PADDLE RESERVOIR FOR 96 PIPETTOR, INCLUDES 6 PARYLENE COATED STAINLESS STEEL BUBBLE PADDLES |
vp-scientific |
|
VP 756CS_PTFE |
PTFE BUBBLE PADDLE RESERVOIR WITH 8 PIPETTE DEPRESSIONS AT 38.1mm INTERVALS, DEPTH = 30 mm, WIDTH = 10 mm, OUTSIDE DIMENSIONS = HEIGHT = 40 mm, WIDTH = 31mm, LENGTH = 318 mm |
vp-scientific |
|
VP 756CT |
RESERVOIR WITH DUCTED BOTTOM FOR 8 PIPETTES INCLUDING PARYLENE COATED STAINLESS STEEL PADDLE WITH 9 BUBBLES AND MAGNETIC CLUTCH, WITH INLET AND OUTLET NIPPLES, MIXES 50 ml |
vp-scientific |
|
VP 757AFe |
BUBBLE PADDLE, 11 BUBBLES ON 9 mm CENTERS, CONSTRUCTED FROM PASSIVATED STAINLESS STEEL WITH 2 PTFE HUBS |
vp-scientific |
|
VP 757AL |
HYDROPHILIC COATED ALUMINUM BUBBLE PADDLE RESERVOIR – INCLUDING 6 BUBBLE PADDLES WITH 7 BUBBLES FOR 96 PIPETTES WITH SBS DIMENSIONS |
vp-scientific |
|
VP 758-3 |
IMPROVED DELRIN RESERVOIR WITH DUCTED BOTTOM FOR 8 PIPETTES INCLUDING ALUMINUM PADDLE WITH 9 BUBBLES AND DOUBLE SEALED REPLACEABLE DRIVE SHAFT, MIXES 50ml |
vp-scientific |
|
VP 758-3MAX |
IMPROVED POLYPROPYLENE RESERVOIR WITH DUCTED BOTTOM FOR 12 PIPETTES INCLUDING ALUMINUM PADDLE WITH 13 BUBBLES AND DOUBLE SEALED REPLACEABLE DRIVE SHAFT, MIXES 400ml |
vp-scientific |
|
VP 758-3P |
IMPROVED POLYPROPYLENE RESERVOIR WITH DUCTED BOTTOM FOR 8 PIPETTES INCLUDING ALUMINUM PADDLE WITH 9 BUBBLES AND DOUBLE SEALED REPLACEABLE DRIVE SHAFT, MIXES 50ml |
vp-scientific |
|
VP 758-3PTFE |
IMPROVED PTFE RESERVOIR WITH DUCTED BOTTOM FOR 8 PIPETTES INCLUDING ALUMINUM PADDLE WITH 9 BUBBLES AND DOUBLE SEALED REPLACEABLE DRIVE SHAFT, MIXES 50ml |
vp-scientific |
|
VP 758-3S |
REPLACEMENT SEAL BEARING FOR VP 758-3, VP 758-3P OR VP 758-3PTFE, INCLUDES SHAFT |
vp-scientific |
|
VP 758-4PTFE |
IMPROVED PTFE RESERVOIR WITH DUCTED BOTTOM FOR 8 PIPETTES INCLUDING ALUMINUM PADDLE WITH 9 BUBBLES AND DOUBLE SEALED DRIVE SHAFT, MIXES 125 ml |
vp-scientific |
|
VP 758-5PP |
Bubble Paddle Reservoir, ducted bottom for 8 or 12 pipet tips, polypropylene, includes paddle with 13 bubbles and double sealed replaceable drive shaft, mixes 450ml |
vp-scientific |
|
VP 758AL |
NEW DESIGN ALUMINUM BUBBLE PADDLE, 9 BUBBLES ON 9mm CENTERS, OR USE WITH SEALED BEARING BUBBLE PADDLE RESERVOIR, FOR USE WITH VP 758-3) |
vp-scientific |
|
VP 758M |
IMPROVED POLYPROPYLENE RESERVOIR WITH DUCTED BOTTOM FOR 8 PIPETTES INCLUDING ALUMINUM PADDLE WITH 9 BUBBLES AND DOUBLE SEALED DRIVE SHAFT, WITH INLET AND OUTLET NIPPLES, MIXES 15 ml |
vp-scientific |
|
VP 759 |
DELRIN BUBBLE PADDLE RESERVOIR WITH DUCTED BOTTOM FOR 96 PIPETTES INCLUDING 4 ALUMINUM BUBBLE PADDLES COATED WITH PARYLENE. |
vp-scientific |
|
VP 759AL |
NEW DESIGN ALUMINUM BUBBLE PADDLE, 13 BUBBLES ON 9mm CENTERS, FOR USE ON VP 759, VP 759P AND VP 759PTFE |
vp-scientific |
|
VP 759P |
POLYPROPYLENE BUBBLE PADDLE RESERVOIR WITH DUCTED BOTTOM FOR 96 PIPETTES INCLUDING 4 ALUMINUM BUBBLE PADDLES COATED WITH PARYLENE. |
vp-scientific |
|
VP 759PTFE |
PTFE BUBBLE PADDLE RESERVOIR WITH DUCTED BOTTOM FOR 96 PIPETTES INCLUDING 4 ALUMINUM BUBBLE PADDLES COATED WITH PARYLENE. |
vp-scientific |
|
VP 760 |
MICROPLATES WITH TUMBLE STIRRERS – INQUIRE FOR SPECIFIC PRICING |
vp-scientific |
|
VP 760A |
MEGA BUBBLE PADDLE STIRRER WITH 11 LITER RESERVOIR |
vp-scientific |
|
VP 760B |
MINI BUBBLE PADDLE STIRRER WITH 0.5 LITER RESERVOIR |
vp-scientific |
|
VP 761-1 |
VARIABLE POWER SUPPLY, MOTOR AND MAGNETIC CLUTCH FOR VP 756C-1 |
vp-scientific |
|
VP 761-1CE |
CE MARK VARIABLE POWER SUPPLY, MOTOR AND MAGNETIC CLUTCH FOR VP 756C-1, OPERATES OFF 230 VOLTS |
vp-scientific |
|
VP 761M |
VARIABLE POWER SUPPLY & MINIATURE MOTOR AND MAGNETIC CLUTCH FOR VP 756CMP OPERATES OFF 120 VOLTS |
vp-scientific |
|
VP 761MCE |
CE COMPLIANT VARIABLE POWER SUPPLY & MINIATURE MOTOR AND MAGNETIC CLUTCH FOR VP 756CMP OPERATES OFF 230 VOLTS |
vp-scientific |
|
VP 761S |
VARIABLE POWER SUPPLY & 22 MM MOTOR AND MAGNETIC CLUTCH FOR VP 756CS-PTFE, MOTOR HOUSING FROM PTFE, REQUIRES 120 VOLTS |
vp-scientific |
|
VP 761SCE |
CE COMPLIANT 24 VOLT VARIABLE POWER SUPPLY & 22 MM MOTOR AND MAGNETIC CLUTCH FOR VP 756CS-PTFE, MOTOR HOUSING FROM PTFE, REQUIRES 230 VOLTS |
vp-scientific |
|
VP 762 |
DC SERVO MOTOR, POWER SUPPLY HOUSING AND MAGNETIC CLUTCH FOR VP 756C BUBBLE PADDLE RESERVOIR, OPERATES OFF 120 VOLTS |
vp-scientific |
|
VP 762CE |
CE MARK DC SERVO MOTOR, POWER SUPPLY HOUSING AND MAGNETIC CLUTCH FOR VP 756C BUBBLE PADDLE RESERVOIR, OPERATES OFF 230 VOLTS |
vp-scientific |
|
VP 763B |
POWER SUPPLY/DRIVE, DC BRUSH TYPE MOTOR WITH HOUSING, GEAR TRAIN WITH 4 MAGNETIC CLUTCHES FOR VP 756C-96B, OPERATES OFF 120 VOLTS. EQUIPPED WITH HEAT EXCHANGER TO CONTROL TEMPERATURE OF THE RESERVOIR. |
vp-scientific |
|
VP 763BCE |
CE MARK POWER SUPPLY/DRIVE, DC BRUSH TYPE MOTOR WITH HOUSING, GEAR TRAIN WITH 4 MAGNETIC CLUTCHES FOR VP 756C-96B, OPERATES OFF 230 VOLTS. EQUIPPED WITH HEAT EXCHANGER TO CONTROL TEMPERATURE OF THE RESERVOIR. |
vp-scientific |
|
VP 763CE |
CE MARK POWER SUPPLY/DRIVE, DC BRUSH TYPE MOTOR WITH HOUSING, GEAR TRAIN WITH 4 MAGNETIC CLUTCHES FOR VP 756C-96, OPERATES OFF 230 VOLTS |
vp-scientific |
|
VP 765B |
POWER SUPPLY/DRIVE, DC BRUSH TYPE MOTOR WITH HOUSING, GEAR TRAIN WITH 6 MAGNETIC CLUTCHES FOR VP 756CP-96B, OPERATES OFF 120 VOLTS |
vp-scientific |
|
VP 765BCE |
CE MARK POWER SUPPLY/DRIVE, DC BRUSH TYPE MOTOR WITH HOUSING, GEAR TRAIN WITH 6 MAGNETIC CLUTCHES FOR VP 756CP-96B, OPERATES OFF 230 VOLTS |
vp-scientific |
|
VP 767-2 |
IMPROVED POWER SUPPLY, MOTOR HOUSING AND COUPLING FOR VP 758-3 SEALED DRIVE SHAFT SYSTEM, OPERATES OFF 120 VOLTS WITH BANANA PLUG |
vp-scientific |
|
VP 767-2CE |
IMPROVED CE MARK POWER SUPPLY, MOTOR HOUSING AND COUPLING FOR SEALED DRIVE SHAFT SYSTEM, OPERATES OFF 230 VOLTS, COUPLES TO VP 758-3 |
vp-scientific |
|
VP 767-2MAX |
IMPROVED POWER SUPPLY, MOTOR HOUSING AND COUPLING FOR VP 758-3MAX SEALED DRIVE SHAFT SYSTEM, OPERATES OFF 120 VOLTS WITH BANANA PLUG |
vp-scientific |
|
VP 767-3 |
Magnetic Bead Stirring system for magnetic bead suspension as high as 450 ml |
vp-scientific |
|
VP 767M |
POWER SUPPLY, MOTOR HOUSING AND COUPLING FOR VP 758M SEALED DRIVE SHAFT SYSTEM, OPERATES OFF 120 VOLTS |
vp-scientific |
|
VP 767M-CE |
CE MARK POWER SUPPLY, MOTOR HOUSING AND COUPLING FOR VP 758M SEALED DRIVE SHAFT SYSTEM, OPERATES OFF 230 VOLTS |
vp-scientific |
|
VP 768B |
POWER SUPPLY/DRIVE, MAXON DC BRUSH TYPE MOTOR WITH HOUSING, GEAR TRAIN WITH 8 MAGNETIC CLUTCHES FOR VP 755C-384B, WITH HEAT EXCHANGER BUILT IN. |
vp-scientific |
|
VP 768BCE |
CE MARK 230 VOLT POWER SUPPLY/DRIVE, MAXON DC BRUSH TYPE MOTOR WITH HOUSING, GEAR TRAIN WITH 8 MAGNETIC CLUTCHES FOR VP 755C-384B, WITH HEAT EXCHANGER BUILT IN. |
vp-scientific |
|
VP 769 |
POWER SUPPLY, MOTOR HOUSING AND GEAR SYSTEM FOR VP 759, VP 759P AND VP 759PTFE 4 SEALED DRIVE SHAFT SYSTEM, OPERATES OFF 120 VOLTS |
vp-scientific |
|
VP 769CE |
POWER SUPPLY, MOTOR HOUSING AND GEAR SYSTEM FOR VP 759, VP 759P AND VP 759PTFE 4 SEALED DRIVE SHAFT SYSTEM, OPERATES OFF 230 VOLTS, CE COMPLIANT |
vp-scientific |
|
VP 770 |
MAGNETIC LOADER AND UNLOADER SYSTEM FOR REMOVING STIRRERS FROM WELLS |
vp-scientific |
|
VP 770B |
MAGNETIC LOADER FOR VP 779- |
vp-scientific |
|
VP 771 |
HEAVY DUTY MAGNETIC STIR ELEMENT PICKUP SYSTEM AND STIR STIX LOADER |
vp-scientific |
|
VP 771-PD |
Magnetic Bead Pellet Disrupter for robotic or manual disruption of pelleted beads in the wells of a microplate |
vp-scientific |
|
VP 771-PR |
Magnetic Bead Pellet Resuspender for robotic or manual pulling of pelleted beads through the column of a microplate |
vp-scientific |
|
VP 771BT-G-4-1AZ |
425 Round Post NdFeB 52 MGO Magnetic Bead Separation Block For 384 Flat Bottom and 384 PCR Microplates. Made to fit in Bio Tek plate washer, price each |
vp-scientific |
|
VP 771BT-G-6AZ |
Magnetic Separation Block, 96 round post magnets, for 384 PCR and 384 flat bottom microplates, 52 MGO NdFeB magnets. Made to fit in BioTek plate washer. |
vp-scientific |
|
VP 771BT-H-1AZ |
329 Round Post NdFeB 52 MGO Magnetic Bead Separation Block For 96 Flat Bottom Microplates And 96 PCR Plates. Made To Fit In BioTek Plate Washer. |
vp-scientific |
|
VP 771BT-LE-A |
Magnetic Bead Separation Block, for 96 well PCR microplates, 24 post 52 MGO NdFeB magnets, red anodized aluminum, made to fit in BioTek microplate washers |
vp-scientific |
|
VP 771BT-Q-1AZ |
384 Round Post NdFeB 52 MGO Magnetic Bead Separation Block For 384 Flat Bottom Plates. Made to fit in Bio Tek plate washer. |
vp-scientific |
|
VP 771BT-R-1Z |
96 Round Post NdFeB 52 MGO Magnetic Bead Separation Block For 96 Flat Bottom Plates. Made to fit in Bio Tek plate washer. |
vp-scientific |
|
VP 771C |
LOADING MAGNET FOR VP 779-, 4″ BY 6″ BY 1″ , MAGNET ENCASED IN WHITE ABS |
vp-scientific |
|
VP 771E-1 |
Delrin Shim 3.2 mm tall to fit on VP 771E-2 to raise the microplate up and lower the magnet position in the wells. |
vp-scientific |
|
VP 771E-2 |
24 POST MAGNETIC BEAD SEPARATOR FOR 96 WELL MICROPLATES, 48 MGO NdFeB MAGNETS – FAST SEPARATION MAGNETS |
vp-scientific |
|
VP 771F |
NON-MAGNETIC ADAPTOR BLOCK TO MIMIC MAGNETIC COLLECTOR/SEPARATOR BLOCK VP 771E |
vp-scientific |
|
VP 771G-4AAM-1 |
Magnetic Bead Separation Block, for 384 standard well microplates, cut away design for robot gripper access, 425 post 52 MGO NdFeB magnets, red anodized aluminum, SBS footprint, includes VP 771G-4RM-1 Registration Base |
vp-scientific |
|
VP 771G-4AM-1 |
Magnetic Bead Separation Block, for 384 standard and deep well microplates, 425 post 52 MGO NdFeB magnets, red anodized aluminum, SBS footprint, includes VP 771G-4RM-1 Registration Base |
vp-scientific |
|
VP 771G-4R |
LOW PROFILE SBS REGISTRATION ADAPTOR PLATE FOR ROBOT APPLICATIONS. MATES TO ALL MAGNETIC SEPARATION BLOCKS |
vp-scientific |
|
VP 771G-4RM-1 |
Registration Base, for aligning microplates on Magnetic Bead Separation Bases, SBS pocket on top surface, 8 of 8 plate guides have adjustable set screws, taller height, SBS footprint |
vp-scientific |
|
VP 771G-4WAM-1 |
Magnetic Bead Separation Block, for 384 standard and deep well microplates, 425 post 52 MGO NdFeB magnets, white polycarbonate, SBS footprint, includes VP 771G-4RM-1 Registration Base |
vp-scientific |
|
VP 771G-7A-1 |
Spacer for Magnetic Bead Separation Block VP 771G-7AM-1, white polycarbnate, 3mm thick, open center to fit around red aluminum magnet frame, rests on steel plate, raises microplate relative to magnet posts. |
vp-scientific |
|
VP 771G-7AAM-1 |
Magnetic Bead Separation Block, for 384 well PCR microplates, cut away design for robotic gripper access, 96 post 52 MGO NdFeB magnets, red anodized aluminum, SBS footprint, includes VP 771G-4RM-1 Registration Base |
vp-scientific |
|
VP 771G-7AAS |
Magnetic Bead Separation Block, for 384 well PCR microplates, cut away design for robotic gripper access, 96 post 52 MGO NdFeB magnets, red anodized aluminum, SBS footprint, no Registration Base |
vp-scientific |
|
VP 771G-7AM-1 |
Magnetic Bead Separation Block, for 384 well PCR microplates, 96 post 52 MGO NdFeB magnets, red anodized aluminum, SBS footprint, includes VP 771G-4RM-1 Registration Base |
vp-scientific |
|
VP 771G-7AS |
Magnetic Bead Separation Block, for 384 well PCR microplates, 96 post 52 MGO NdFeB magnets, red anodized aluminum, SBS footprint, no Registration Base |
vp-scientific |
|
VP 771G-8AAS |
Magnetic Bead Separation Block for 384 PCR plates, 96 post magnets, 52 MGO, red anodized aluminum, 4mm thick steel plate notched for gripper access, SBS footprint, no Registration Base. |
vp-scientific |
|
VP 771HA |
ROBOT 329 ROUND POST NdFeB MAGNETIC BEAD SEPARATOR BLOCK FOR 96 FLAT BOTTOM MICROPLATES OR 96 WELL CONICAL WELL PCR PLATES WITH 329 VP 783N52C-3-6 MAGNETS (52 MGO), RED ANODIZED SBS FOOTPRINT. MATES TO AND INCLUDES A LOW PROFILE ROBOT DECK ADAPTOR (VP 771G- |
vp-scientific |
|
VP 771HH-G-4 |
Magnetic Bead Separation Block, handheld, for 384 well flat bottom plates or 384 conical well plates, 425 round post 52 MGO NdFeB magnets positioned around bottoms of wells, white polycarbonate magnet frame, polypropylene base, adjustable clips to hold plates, rubber O-Ring gripper on base. |
vp-scientific |
|
VP 771HH-H |
Magnetic Bead Separation Block, handheld, for 96 well flat bottom plates or 96 conical well plates, 329 round post 52 MGO NdFeB magnets positioned around bottoms of wells, white polycarbonate magnet frame, polypropylene base, adjustable clips to hold plates, rubber O-Ring gripper on base. |
vp-scientific |
|
VP 771HH-LA |
Magnetic Bead Separation Block, handheld, for 96 well PCR plates with full, half or no skirt or 96 well microplates with round or V-bottom wells, 24 round post 52 MGO NdFeB magnets, white polycarbonate magnet frame, polypropylene base, adjustable clips to hold plates, rubber O-Ring gripper on base. |
vp-scientific |
|
VP 771HH-LF |
Magnetic Bead Separation Block, handheld, for 96 well PCR plates with full, half or no skirt or 96 well microplates with round, flat or V-bottom wells, 24 round post 52 MGO NdFeB magnets, white polycarbonate magnet frame, polypropylene base, adjustable clips to hold plates, rubber O-Ring gripper on base. |
vp-scientific |
|
VP 771HH-MC |
Magnetic Bead Separation Block, handheld, for 96 deep well microplates, 6 bar 50 MGO NdFeB magnets, white polycarbonate magnet frame, polypropylene base, adjustable clips to hold plates, rubber O-Ring gripper on base. |
vp-scientific |
|
VP 771HH-Q |
Magnetic Bead Separation Block, handheld, for 384 well microplates,384 round post 52 MGO NdFeB magnet centered under each well, white polycarbonate magnet frame, polypropylene base, adjustable clips to hold plates, rubber O-Ring gripper on base. |
vp-scientific |
|
VP 771HH-R |
Magnetic Bead Separation Block, handheld, for 96 well microplates, 96 round post 52 MGO NdFeB magnet centered under each well, white polycarbonate magnet frame, polypropylene base, adjustable clips to hold plates, rubber O-Ring gripper on base. |
vp-scientific |
|
VP 771HWAM-1 |
ROBOT 329 ROUND POST NdFeB MAGNETIC BEAD SEPARATOR BLOCK FOR 96 FLAT BOTTOM MICROPLATES OR 96 WELL CONICAL WELL PCR PLATES WITH 329 VP 783N52C-3-6 MAGNETS (52 MGO), WHITE POLYCARBONATE, SBS FOOTPRINT. MATES TO AND INCLUDES A LOW PROFILE ROBOT DECK ADAPTOR ( |
vp-scientific |
|
VP 771IAM-1 |
Magnetic Bead Separation Block, for 384 PCR, standard well, and deep well microplates, 204 post 52 MGO NdFeB magnets, red anodized aluminum, SBS footprint, includes VP 771G-4RM-1 Registration Base |
vp-scientific |
|
VP 771IWAM-1 |
Magnetic Bead Separation Block, for 384 PCR, standard well, and deep well microplates, 204 post 52 MGO NdFeB magnets, white polycarbonate, SBS footprint, includes VP 771G-4RM-1 Registration Base |
vp-scientific |
|
VP 771JAM-1 |
Magnetic Bead Separation Block, for 96 standard well microplates, 96 post 52 MGO NdFeB magnets, red anodized aluminum, SBS footprint, includes VP 771G-4RM-1 Registration Base |
vp-scientific |
|
VP 771JWAM-1 |
Magnetic Bead Separation Block, for 96 standard well microplates, 96 post 52 MGO NdFeB magnets, white polycarbonate, SBS footprint, includes VP 771G-4RM-1 Registration Base |
vp-scientific |
|
VP 771L-1 |
PCR PLATE HOLDER FOR USE WITH TECAN HYDROFLEX PLATE WASHER, POSITIONS PCR PLATE SECURELY OVER MAGNETS IN PLATE WASHER TRAY, WITH BOTTOM OF EACH WELL DIRECTLY ON TOP AND TOUCHING MAGNET. PRICE EACH. |
vp-scientific |
|
VP 771LAM-1 |
Magnetic Bead Separation Block, for 96 well PCR microplates, 24 post 52 MGO NdFeB magnets, bead pellet level ~200 ul, red anodized aluminum, SBS footprint, includes VP 771G-4RM-1 Registration Base |
vp-scientific |
|
VP 771LAS |
Magnetic Bead Separation Block, for 96 well PCR microplates, 24 post 52 MGO NdFeB magnets, bead pellet level ~200 ul, red anodized aluminum, SBS footprint, no Registration Base |
vp-scientific |
|
VP 771LB-3BM-1 |
Magnetic Bead Separation Block, for 96 well PCR microplates, 24 post 52 MGO NdFeB magnets, bead pellet level ~100 ul, red anodized aluminum, SBS footprint, includes VP 771G-4RM-1 Registration Base |
vp-scientific |
|
VP 771LB-3BS |
Magnetic Bead Separation Block, for 96 well PCR microplates, 24 post 52 MGO NdFeB magnets, bead pellet level ~100 ul, red anodized aluminum, SBS footprint, no Registration Base |
vp-scientific |
|
VP 771LC-3CM-1 |
Magnetic Bead Separation Block, for 96 well PCR microplates, 24 post 52 MGO NdFeB magnets, bead pellet level ~30 ul, red anodized aluminum, SBS footprint, raised edge, includes VP 771G-4RM-1 Registration Base |
vp-scientific |
|
VP 771LC-3CS |
Magnetic Bead Separation Block, for 96 well PCR microplates, 24 post 52 MGO NdFeB magnets, bead pellet level ~30 ul, red anodized aluminum, SBS footprint, raised edge, no Registration Base |
vp-scientific |
|
VP 771LD-4CM-1 |
Magnetic Bead Separation Block, for 96 well PCR microplates, 24 post 52 MGO NdFeB magnets, bead pellet level ~10 ul, red anodized aluminum, SBS footprint, includes VP 771G-4RM-1 Registration Base |
vp-scientific |
|
VP 771LD-4CS |
Magnetic Bead Separation Block, for 96 well PCR microplates, 24 post 52 MGO NdFeB magnets, bead pellet level ~10 ul, red anodized aluminum, SBS footprint, no Registration Base |
vp-scientific |
|
VP 771LE-4AM-1 |
Magnetic Bead Separation Block, for 96 well PCR microplates, 24 post 42 MGO NdFeB magnets, bead pellet level ~75 ul, red anodized aluminum, SBS footprint, includes VP 771G-4RM-1 Registration Base |
vp-scientific |
|
VP 771LE-4AS |
Magnetic Bead Separation Block, for 96 well PCR microplates, 24 post 42 MGO NdFeB magnets, bead pellet level ~75 ul, red anodized aluminum, SBS footprint, no Registration Base |
vp-scientific |
|
VP 771LE-4BM-1 |
Magnetic Bead Separation Block, for 96 well PCR microplates, 24 post 52 MGO NdFeB magnets, bead pellet level ~50 ul, red anodized aluminum, SBS footprint, includes VP 771G-4RM-1 Registration Base |
vp-scientific |
|
VP 771LE-4BS |
Magnetic Bead Separation Block, for 96 well PCR microplates, 24 post 52 MGO NdFeB magnets, bead pellet level ~50 ul, red anodized aluminum, SBS footprint, no Registration Base |
vp-scientific |
|
VP 771LE-4CM-1 |
Magnetic Bead Separation Block, for 96 well PCR microplates, 24 post 52 MGO NdFeB magnets, bead pellet level ~30 ul, red anodized aluminum, SBS footprint, includes VP 771G-4RM-1 Registration Base |
vp-scientific |
|
VP 771LE-4CS |
Magnetic Bead Separation Block, for 96 well PCR microplates, 24 post 52 MGO NdFeB magnets, bead pellet level ~30 ul, red anodized aluminum, SBS footprint, no Registration Base |
vp-scientific |
|
VP 771LFWM-1 |
Magnetic Bead Separation Block, for 96 well PCR microplates, 24 post 52 MGO NdFeB magnets, bead pellet level ~15 ul, white polycarbonate, SBS footprint, includes VP 771G-4RM-1 Registration Base |
vp-scientific |
|
VP 771LFWS |
Magnetic Bead Separation Block, for 96 well PCR microplates, 24 post 52 MGO NdFeB magnets, bead pellet level ~15 ul, white polycarbonte, SBS footprint, no Registration Base |
vp-scientific |
|
VP 771LM-1 |
Magnetic Bead Separation Block, for 96 well PCR microplates, 24 post 42 MGO NdFeB magnets, bead pellet level ~200 ul, red anodized aluminum, SBS footprint, includes VP 771G-4RM-1 Registration Base |
vp-scientific |
|
VP 771LS |
Magnetic Bead Separation Block, for 96 well PCR microplates, 24 post 42 MGO NdFeB magnets, bead pellet level ~200 ul, red anodized aluminum, SBS footprint, no Registration Base |
vp-scientific |
|
VP 771LWAS |
Magnetic Bead Separation Block, for 96 well PCR microplates, 24 post 52 MGO NdFeB magnets, bead pellet level ~200 ul, white polycarbonate, SBS footprint, no Registration Base |
vp-scientific |
|
VP 771LWS |
Magnetic Bead Separation Block, for 96 well PCR microplates, 24 post 42 MGO NdFeB magnets, bead pellet level ~200 ul, white polycarbonate, SBS footprint, no Registration Base |
vp-scientific |
|
VP 771MA-1 |
SPACER FOR VP 771MA TO ALLOW FOR A BROADER COMPATIBILITY OF PLATES. |
vp-scientific |
|
VP 771MAM-1 |
Magnetic Bead Separation Block, for 6 well reservoirs/microplates and 24 and 48 well microplates, 4 bar 50 MGO NdFeB magnets, red anodized aluminum, SBS footprint, includes VP 771G-4RM-1 Registration Base |
vp-scientific |
|
VP 771MBM-1 |
Magnetic Bead Separation Block, for 4 well microplates and reservoirs, 5 bar 50 MGO NdFeB magnets, red anodized aluminum, SBS footprint, includes VP 771G-4RM-1 Registration Base |
vp-scientific |
|
VP 771MCWM-1 |
Magnetic Bead Separation Block, for 96 standard and deep well microplates, 6 bar 50 MGO NdFeB magnets, white polycarbonate, SBS footprint, includes VP 771G-4RM-1 Registration Base |
vp-scientific |
|
VP 771MCWS |
Magnetic Bead Separation Block, for 96 standard and deep well microplates, 6 bar 50 MGO NdFeB magnets, white polycarbonate, SBS footprint, no Registration Base |
vp-scientific |
|
VP 771MDWM-1 |
Magnetic Bead Separation Block for 96 well microplates or 96 deep well plates, 13 bar 50 MGO NdFeB magnets, white polycarbonate magnet frame, SBS footprint, includes Registration Base VP 771G-4RM-1. |
vp-scientific |
|
VP 771MDWS |
Magnetic Bead Separation Block, for 96 deep well microplates, 13 bar 50 MGO NdFeB magnets, white polycarbonate, SBS footprint, no Registration Base |
vp-scientific |
|
VP 771MM-1 |
Magnetic Bead Separation Block, for 96 standard and deep well microplates, 7 bar 50 MGO NdFeB magnets, red anodized aluminum, SBS footprint, includes VP 771G-4RM-1 Registration Base |
vp-scientific |
|
VP 771MWM-1 |
Magnetic Bead Separation Block, for 96 standard and deep well microplates, 7 bar 50 MGO NdFeB magnets, white polycarbonate, SBS footprint, includes VP 771G-4RM-1 Registration Base |
vp-scientific |
|
VP 771MWS |
Magnetic Bead Separation Block, for 96 standard and deep well microplates, 7 bar 50 MGO NdFeB magnets, white polycarbonate, SBS footprint, no Registration Base |
vp-scientific |
|
VP 771NM-1 |
Magnetic Bead Separation Block, for 96 deep well microplates with open architecture underneath, 111 tall square post 52 MGO NdFeB magnets, vertical magnetic pull, red anodized aluminum, SBS footprint, includes VP 771G-4RM-1 Registration Base |
vp-scientific |
|
VP 771OM-1 |
Magnetic Bead Separation Block, for 96 deep well microplates with open architecture underneath, 117 tall square post 52 MGO NdFeB magnets, vertical magnetic pull, red anodized aluminum, SBS footprint, includes VP 771G-4RM-1 Registration Base |
vp-scientific |
|
VP 771PAM-1 |
Magnetic Bead Separation Block, for 96 deep well microplates with open architecture underneath, 24 tall square post 52 MGO NdFeB magnets, horizontal magnetic pull, red anodized aluminum, SBS footprint, includes VP 771G-4RM-1 Registration Base |
vp-scientific |
|
VP 771PAS |
Magnetic Bead Separation Block, for 96 deep well microplates with open architecture underneath, 24 tall square post 52 MGO NdFeB magnets, horizontal magnetic pull, red anodized aluminum, SBS footprint, no Registration Base |
vp-scientific |
|
VP 771PM-1 |
Magnetic Bead Separation Block, for 96 deep well microplates with open architecture underneath, 24 tall square post 52 MGO NdFeB magnets, vertical magnetic pull, red anodized aluminum, SBS footprint, includes VP 771G-4RM-1 Registration Base |
vp-scientific |
|
VP 771PS |
Magnetic Bead Separation Block, for 96 deep well microplates with open architecture underneath, 24 tall square post 52 MGO NdFeB magnets, vertical magnetic pull, red anodized aluminum, SBS footprint, no Registration Base |
vp-scientific |
|
VP 771QAM-1 |
Magnetic Bead Separation Block, for 384 standard and deep well microplates, 384 post 52 MGO NdFeB magnets, red anodized aluminum, SBS footprint, includes VP 771G-4RM-1 Registration Base |
vp-scientific |
|
VP 771QMA |
MANUAL 384 ROUND POST NdFeB MAGNETIC BEAD SEPARATOR BLOCK FOR 384 WELL MICROPLATES WITH 425 VP 783N52C-3-6 MAGNETS (52 MGO), RED ANODIZED SBS FOOTPRINT. MATES TO AND INCLUDES VP 771G-4RM FOR USE WITH MANUAL ASPIRATION AND DISPENSING MANIFOLDS. |
vp-scientific |
|
VP 771QW-1-H4C |
Handheld 384 Round Post NdFeB Magnetic Bead Separator Block For 384 Well Microplates With 384 NdFeB Magnets (52 MGO) Centered Under Each Well. O-Ring On Base Plate Facilitates Gripping. |
vp-scientific |
|
VP 771RM-1 |
Magnetic Bead Separation Block, for 96 standard well microplates, 96 large diameter post 52 MGO NdFeB magnets, red anodized aluminum, SBS footprint, includes VP 771G-4RM-1 Registration Base |
vp-scientific |
|
VP 771RWAM-1 |
Magnetic Bead Separation Block, for 96 standard well microplates, 96 large diameter, tall post 52 MGO NdFeB magnets, white polycarbonate, SBS footprint, includes VP 771G-4RM-1 Registration Base |
vp-scientific |
|
VP 771RWM-1 |
Magnetic Bead Separation Block, for 96 standard well microplates, 96 large diameter post 52 MGO NdFeB magnets, white polycarbonate, SBS footprint, includes VP 771G-4RM-1 Registration Base |
vp-scientific |
|
VP 771Z-384 |
Adjustable registration jig to hold pipet tips off the bottom of 384 well Microplates on V&P magnetic separation |
vp-scientific |
|
VP 772 |
SUPER MAGNET UNLOADING SYSTEM |
vp-scientific |
|
VP 772-CF25 |
MAGNETIC STIR ELEMENT TO FIT CORNING 500ml PP CENTRIFUGE TUBE (#431123). INCLUDES STAINLESS STEEL ASPIRATION TUBE. |
vp-scientific |
|
VP 772-CF50 |
Magnetic stir element to fit 50ml centrifuge tube. Includes stainless steel Aspiration tube. |
vp-scientific |
|
VP 772A |
SUPER MAGNET STIR ELEMENT REMOVER WITH CROSS CONTAMINATION CONTROL |
vp-scientific |
|
VP 772BK-N42-11-23 |
Magnetic Stir Bar – 11.5mm Diameter, 23.1mm Long. PEEK Encapsulated NdFeB (42 MGO) Magnet, 150C Maximum Operating Temperature. 10/Pkg |
vp-scientific |
|
VP 772BK-N42-11-23.1 |
Magnetic Stir Bar – 11.5mm Diameter, 23.1mm Long. PEEK Encapsulated NdFeB (42 MGO) Magnet, 150C Maximum Operating Temperatue. Each |
vp-scientific |
|
VP 772BK-N42-11-36 |
Magnetic Stir Bar – 11.5mm Diameter, 35.5mm Long.PEEK Encapsulated NdFeB (42 MGO) Magnet, 150C Maximum Operating Temperature.10/Pkg |
vp-scientific |
|
VP 772BK-N42-11-36.1 |
Magnetic Stir Bar – 11.5mm Diameter, 35.5mm Long.PEEK Encapsulated NdFeB (42 MGO) Magnet, 150C Maximum Operating Temperature. Each |
vp-scientific |
|
VP 772BK-N42-11-48 |
Magnetic Stir Bar – 11.5mm Diameter, 48.2mm Long.PEEK Encapsulated NdFeB (42 MGO) Magnet, 150C Maximum Operating Temperature.10/Pkg |
vp-scientific |
|
VP 772BK-N42-11-48.1 |
Magnetic Stir Bar – 11.5mm Diameter, 48.2mm Long.PEEK Encapsulated NdFeB (42 MGO) Magnet, 150C Maximum Operating Temperature. Each |
vp-scientific |
|
VP 772BK-N42-11-61 |
Magnetic Stir Bar – 11.5mm Diameter, 60.9mm Long.PEEK Encapsulated NdFeB (42 MGO) Magnet, 150C Maximum Operating Temperature.10/Pkg |
vp-scientific |
|
VP 772BK-N42-11-61.1 |
Magnetic Stir Bar – 11.5mm Diameter, 60.9mm Long.PEEK Encapsulated NdFeB (42 MGO) Magnet, 150C Maximum Operating Temperature. Each |
vp-scientific |
|
VP 772BK-N52-11-23 |
Magnetic Stir Bar – 11.5mm Diameter, 23.1mm Long.PEEK Encapsulated NdFeB (52 MGO) Magnet, 80C Maximum Operating Temperature.10/Pkg |
vp-scientific |
|
VP 772BK-N52-11-23.1 |
Magnetic Stir Bar – 11.5mm Diameter, 23.1mm Long.PEEK Encapsulated NdFeB (52 MGO) Magnet, 80C Maximum Operating Temperature. Each |
vp-scientific |
|
VP 772BK-N52-11-36 |
Magnetic Stir Bar – 11.5mm Diameter, 35.5mm Long.PEEK Encapsulated NdFeB (52 MGO) Magnet, 80C Maximum Operating Temperature.10/Pkg |
vp-scientific |
|
VP 772BK-N52-11-36.1 |
Magnetic Stir Bar – 11.5mm Diameter, 35.5mm Long.PEEK Encapsulated NdFeB (52 MGO) Magnet, 80C Maximum Operating Temperature. Each |
vp-scientific |
|
VP 772BK-N52-11-48 |
Magnetic Stir Bar – 11.5mm Diameter, 48.2mm Long.PEEK Encapsulated NdFeB (52 MGO) Magnet, 80C Maximum Operating Temperature.10/Pkg |
vp-scientific |
|
VP 772BK-N52-11-48.1 |
Magnetic Stir Bar – 11.5mm Diameter, 48.2mm Long.PEEK Encapsulated NdFeB (52 MGO) Magnet, 80C Maximum Operating Temperature. Each |
vp-scientific |
|
VP 772BK-N52-11-61 |
Magnetic Stir Bar – 11.5mm Diameter, 60.9mm Long.PEEK Encapsulated NdFeB (52 MGO) Magnet, 80C Maximum Operating Temperature.10/Pkg |
vp-scientific |
|
VP 772BK-N52-11-61.1 |
Magnetic Stir Bar – 11.5mm Diameter, 60.9mm Long.PEEK Encapsulated NdFeB (52 MGO) Magnet, 80C Maximum Operating Temperature. Each |
vp-scientific |
|
VP 772BK-S29-11-23 |
Magnetic Stir Bar – 11.5mm Diameter, 23.1mm Long.PEEK Encapsulated SmCo (29 MGO) Magnet, 300C Maximum Operating Temperature. 10/Pkg |
vp-scientific |
|
VP 772BK-S29-11-23.1 |
Magnetic Stir Bar – 11.5mm Diameter, 23.1mm Long.PEEK Encapsulated SmCo (29 MGO) Magnet, 300C Maximum Operating Temperature. Each |
vp-scientific |
|
VP 772BK-S29-11-36 |
Magnetic Stir Bar – 11.5mm Diameter, 35.5mm Long.PEEK Encapsulated SmCo (29 MGO) Magnet, 300C Maximum Operating Temperature.10/Pkg |
vp-scientific |
|
VP 772BK-S29-11-36.1 |
Magnetic Stir Bar – 11.5mm Diameter, 35.5mm Long.PEEK Encapsulated SmCo (29 MGO) Magnet, 300C Maximum Operating Temperature. Each |
vp-scientific |
|
VP 772BK-S29-11-48 |
Magnetic Stir Bar – 11.5mm Diameter, 48.2mm Long.PEEK Encapsulated SmCo (29 MGO) Magnet, 300C Maximum Operating Temperature.10/Pkg |
vp-scientific |
|
VP 772BK-S29-11-48.1 |
Magnetic Stir Bar – 11.5mm Diameter, 48.2mm Long.PEEK Encapsulated SmCo (29 MGO) Magnet, 300C Maximum Operating Temperature. Each |
vp-scientific |
|
VP 772BK-S29-11-61 |
Magnetic Stir Bar – 11.5mm Diameter, 60.9mm Long.PEEK Encapsulated SmCo (29 MGO) Magnet, 300C Maximum Operating Temperature.10/Pkg |
vp-scientific |
|
VP 772BK-S29-11-61.1 |
Magnetic Stir Bar – 11.5mm Diameter, 60.9mm Long.PEEK Encapsulated SmCo (29 MGO) Magnet, 300C Maximum Operating Temperature. Each |
vp-scientific |
|
VP 772BN-24-127 |
PTFE SOLID BAR WITH POCKETS ENCASING PARYLENE COATED NdFeB MAGNETS, VP 782N-12, SANDWICH STYLE, 15.25 MM DIAMETER BODY, 24 MM DIAMETER ENDS, 127.4 MM LONG, EACH |
vp-scientific |
|
VP 772BN-49-127 |
PTFE SOLID BAR WITH POCKETS ENCASING PARYLENE COATED NdFeB MAGNETS, VP 782NC-8-13, SANDWICH STYLE, 30 MM DIAMETER BODY, 49 MM DIAMETER ENDS, 127 MM LONG, EACH |
vp-scientific |
|
VP 772BN-49-152 |
PTFE SOLID BAR WITH POCKETS ENCASING PARYLENE COATED NdFeB MAGNETS, VP 782NC-8-13, SANDWICH STYLE, 30 MM DIAMETER BODY, 49 MM DIAMETER ENDS, 151.9 MM LONG, EACH |
vp-scientific |
|
VP 772BN-49-253 |
PTFE SOLID BAR WITH POCKETS ENCASING PARYLENE COATED NdFeB MAGNETS, VP 782NC-8-13, SANDWICH STYLE, 30 MM DIAMETER BODY, 51 MM DIAMETER ENDS, 253 MM LONG, EACH |
vp-scientific |
|
VP 772BN-49-76 |
PTFE SOLID BAR WITH POCKETS ENCASING PARYLENE COATED NdFeB MAGNETS, VP 782NC-8-13, SANDWICH STYLE, 30 MM DIAMETER BODY, 49 MM DIAMETER ENDS, 76.2 MM LONG, EACH |
vp-scientific |
|
VP 772BP-N42-11-23 |
Magnetic Stir Bar – 11.5mm Diameter, 23.1mm Long. PVDF Encapsulated NdFeB (42 MGO) Magnet, 150C Maximum Operating Temperature.10/Pkg |
vp-scientific |
|
VP 772BP-N42-11-23.1 |
Magnetic Stir Bar – 11.5mm Diameter, 23.1mm Long. PVDF Encapsulated NdFeB (42 MGO) Magnet, 150C Maximum Operating Temperature. Each |
vp-scientific |
|
VP 772BP-N42-11-36 |
Magnetic Stir Bar – 11.5mm Diameter, 35.5mm Long. PVDF Encapsulated NdFeB (42 MGO) Magnet, 150C Maximum Operating Temperature.10/Pkg |
vp-scientific |
|
VP 772BP-N42-11-36.1 |
Magnetic Stir Bar – 11.5mm Diameter, 35.5mm Long.PVDF Encapsulated NdFeB (42 MGO) Magnet, 150C Maximum Operating Temperature. Each |
vp-scientific |
|
VP 772BP-N42-11-48 |
Magnetic Stir Bar – 11.5mm Diameter, 48.2mm Long.PVDF Encapsulated NdFeB (42 MGO) Magnet, 150C Maximum Operating Temperature.10/Pkg |
vp-scientific |
|
VP 772BP-N42-11-48.1 |
Magnetic Stir Bar – 11.5mm Diameter, 48.2mm Long.PVDF Encapsulated NdFeB (42 MGO) Magnet, 150C Maximum Operating Temperature. Each |
vp-scientific |
|
VP 772BP-N42-11-61 |
Magnetic Stir Bar – 11.5mm Diameter, 60.9mm Long.PVDF Encapsulated NdFeB (42 MGO) Magnet, 150C Maximum Operating Temperature.10/Pkg |
vp-scientific |
|
VP 772BP-N42-11-61.1 |
Magnetic Stir Bar – 11.5mm Diameter, 60.9mm Long.PVDF Encapsulated NdFeB (42 MGO) Magnet, 150C Maximum Operating Temperature. Each |
vp-scientific |
|
VP 772BP-N52-11-23 |
Magnetic Stir Bar – 11.5mm Diameter, 23.1mm Long.PVDF Encapsulated NdFeB (52 MGO) Magnet, 80C Maximum Operating Temperature.10/Pkg |
vp-scientific |
|
VP 772BP-N52-11-23.1 |
Magnetic Stir Bar – 11.5mm Diameter, 23.1mm Long.PVDF Encapsulated NdFeB (52 MGO) Magnet, 80C Maximum Operating Temperature. Each |
vp-scientific |
|
VP 772BP-N52-11-36 |
Magnetic Stir Bar – 11.5mm Diameter, 35.5mm Long.PVDF Encapsulated NdFeB (52 MGO) Magnet, 80C Maximum Operating Temperature.10/Pkg |
vp-scientific |
|
VP 772BP-N52-11-36.1 |
Magnetic Stir Bar – 11.5mm Diameter, 35.5mm Long.PVDF Encapsulated NdFeB (52 MGO) Magnet, 80C Maximum Operating Temperature. Each |
vp-scientific |
|
VP 772BP-N52-11-48 |
Magnetic Stir Bar – 11.5mm Diameter, 48.2mm Long.PVDF Encapsulated NdFeB (52 MGO) Magnet, 80C Maximum Operating Temperature.10/Pkg |
vp-scientific |
|
VP 772BP-N52-11-48.1 |
Magnetic Stir Bar – 11.5mm Diameter, 48.2mm Long.PVDF Encapsulated NdFeB (52 MGO) Magnet, 80C Maximum Operating Temperature. Each |
vp-scientific |
|
VP 772BP-N52-11-61 |
Magnetic Stir Bar – 11.5mm Diameter, 60.9mm Long.PVDF Encapsulated NdFeB (52 MGO) Magnet, 80C Maximum Operating Temperature.10/Pkg |
vp-scientific |
|
VP 772BP-N52-11-61.1 |
Magnetic Stir Bar – 11.5mm Diameter, 60.9mm Long.PVDF Encapsulated NdFeB (52 MGO) Magnet, 80C Maximum Operating Temperature. Each |
vp-scientific |
|
VP 772DK-N42-5-2 |
Magnetic Stir Disc – 5mm diameter, 1.7mm thick. PEEK encapsulated NdFeB (42 MGO) magnet, 150C maximum operating temperature. 10/pkg |
vp-scientific |
|
VP 772DP-N42-24-3 |
Magnetic Stir Disc – 24mm diameter, 2.9mm thick. PVDF encapsulated NdFeB (42 MGO) magnet, 150C maximum operating temperature. 10/pkg |
vp-scientific |
|
VP 772DP-N42-5-2 |
Magnetic Stir Disc – 5mm diameter, 1.7mm thick. PVDF encapsulated NdFeB (42 MGO) magnet, 150C maximum operating temperature. 10/pkg |
vp-scientific |
|
VP 772DP-N42-8-2 |
Magnetic Stir Disc – 8mm diameter, 1.9mm thick. PVDF encapsulated NdFeB (42 MGO) magnet, 150C maximum operating temperature. 10/pkg |
vp-scientific |
|
VP 772F |
MAGNETIC BEAD SEPARATOR JIG FOR FOUR 100 ml GLASS OR 250 ML NALGENE BOTTLES, USES 2 NdFeB MAGNETS |
vp-scientific |
|
VP 772F1M |
MAGNETIC BEAD SEPARATOR JIG FOR EIGHT 50 ML CONICAL TEST TUBES |
vp-scientific |
|
VP 772F1R |
TUBE RACK FOR VP 772F1M MAGNETIC SEPARATOR. RACK HOLDS EIGHT 50 ML CONICAL TEST TUBES |
vp-scientific |
|
VP 772F2M-1 |
Magnetic Bead Separator Base For A Variety of Tubes, Used With Any Of The Following Tube Racks, VP 772F2R-1, VP 772F2R-2, VP 772F2R-3. Clear Polycarbonate, White ABS, And Stainless Steel Rods. SBS Footprint. Each. |
vp-scientific |
|
VP 772F2M-1B |
Non-Magnetic Base For Tube Racks VP 772F2R-1, VP 772F2R-2, VP 772F2R-3. Similar To VP 772F2M-1 But Without Magnet. Clear Polycarbonate And Stainless Steel Rods. SBS footprint. Each. |
vp-scientific |
|
VP 772F2M-1kit1 |
VP 772F2M-1kit1 Magnetic Bead Separator System |
vp-scientific |
|
VP 772F2M-1kit2 |
VP 772F2M-1kit2 Magnetic Bead Separator System |
vp-scientific |
|
VP 772F2M-1kit3 |
VP 772F2M-1kit3 Magnetic Bead Separator System |
vp-scientific |
|
VP 772F2R-1 |
Tube Rack For VP 772F2M-1 Magnetic Bead Separator, For Use With 1.5ml Tubes (13mm OD), With 18mm Spacing. Clear Polycarbonate. Mates To VP 772F2M-1 And VP 772F2M-1B . SBS Footprint. Each. |
vp-scientific |
|
VP 772F2R-2 |
Tube Rack For VP 772F2M-1 Magnetic Bead Separator For Use With 15ml Tubes (16.7mm OD), With 23.5mm Spacing. Clear Polycarbonate. Mates To VP 772F2M-1 And VP 772F2M-1B. SBS Footprint. Each. |
vp-scientific |
|
VP 772F2R-3 |
Tube Rack For VP 772F2M-1 Magnetic Bead Separator, For Use With 50ml Tubes (29mm OD), With 23.5mm Spacing. Clear Polycarbonate. Mates To VP 772F2M-1 And VP 772F2M-1B. SBS Footprint. Each. |
vp-scientific |
|
VP 772F3 |
SINGLE MAGNETIC SEPARATION STAND FOR 1.5 ML MICRO-CENTRIFUGE TUBES WITH ONE 6.35MM DIAMETER AND 6.35MM TALL MAGNETIC CYLINDER MADE FROM 52 MGO NdFeB – PRICE EACH |
vp-scientific |
|
VP 772F4 |
Magnetic separation stand 0.2 ml 8-strip PCR tubes . The stand has eight 6.35 mm diameter NdFeB magnets (52 MGO) positioned behind each PCR tube to capture magnetic beads to the side of the tubes. – Price Each |
vp-scientific |
|
VP 772F4-1 |
Low Profile Magnetic separation stand 0.2 ml 8-strip PCR tubes . The stand has eight 6.35 mm diameter NdFeB magnets (52 MGO) positioned behind each PCR tube to capture magnetic beads to the side very close to the bottom of the tubes. – Price Each |
vp-scientific |
|
VP 772F5 |
SINGLE MAGNETIC SEPARATION STAND FOR 1.5 ML MICRO-CENTRIFUGE TUBES WITH TWO 6.35MM DIAMETER AND 6.35MM TALL MAGNETIC CYLINDERS MADE FROM 52 MGO NdFeB – PRICE EACH |
vp-scientific |
|
VP 772F6 |
Magnetic Separation Rack for eight 1.5ml or 2.0ml micro-centrifuge tubes with 16 10mm diameter and 6 mm tall magnetic cylinders made from 52 MGO NdFeB, pulls magnetic beads to the bottom – price each |
vp-scientific |
|
VP 772F9 |
Magnetic Bead Separation Rack, handheld, for 1.5 or 2.0 ml snap cap microcentrifuge tubes, 12 tubes in removable rack, white Delrin, 2 round 52 MGO NdFeB magnets per tube on 18 mm centers in base with rubber O-ring gripper. |
vp-scientific |
|
VP 772FA |
MAGNETIC BEAD SEPARATOR JIG FOR 250 AND 500 ML BOTTLES, PRICE EACH |
vp-scientific |
|
VP 772FA-1 |
Magnetic bead separation system for 5 liter bottles consists of a powerful 48 MGO NdFeB magnet that is a 25.4 mm by 25.4 mm by 127 mm long (1“ x 1” x 5”). |
vp-scientific |
|
VP 772FB-1 |
Single Magnetic Separation Stand made from HDPE (63.5mm diameter and 61mm tall) For 50ml centrifuge tubes with one magnetic cube (25.4mm on a side). Made from 48 MGO NdFeB. |
vp-scientific |
|
VP 772FB-1A |
A clear Acrylic cylinder 29.22mm in diameter and 51.82mm long with a 16.44mm diameter hole drilled so it is tangent to the edge and has a 16.38mm wide opening to the magnet. Designed as an adaptor to fit inside a VP 772FB-1 and allow the use of test tubes |
vp-scientific |
|
VP 772FB-1B |
Magnetic insert for VP 772FB-1, magnet pulls beads to conical side of 50ml tube bottom. |
vp-scientific |
|
VP 772FB-1C |
Magnetic insert for VP 772FB-1 and VP 772FB-1A, magnet pulls beads to conical side of 15ml tube bottom. |
vp-scientific |
|
VP 772FC-2 |
Magnetic Bead Separation Stand for 1 liter bottles, large 45 MGO NdFeB magnet, handle for decanting solution |
vp-scientific |
|
VP 772FN-10-35TF |
PTFE FLAT POCKET ENCASING 2 PARYLENE COATED 6 MM DIAMETER NdFeB MAGNETS SANDWICH STYLE ,2.3 MM THICK PLATE, 10 MM WIDE AND 35 MM LONG, WITH TUNING FORK DESIGN WITH EARS AND A SPIN POINT ON ROUND BOTTOM, PKG OF 10 |
vp-scientific |
|
VP 772FN-13-13 |
PTFE FLAT POCKET ENCASING 2 PARYLENE ENCAPSULATED VP 782N-12 NdFeB DISCS 1.58 MM THICK PTFE – SANDWICH STYLE, 13 MM DIAMETER, 10/PKG |
vp-scientific |
|
VP 772FN-13-19 |
PTFE FLAT POCKET ENCASING 4 PARYLENE COATED 3.4 MM DIAMETER NdFeB MAGNETS SANDWICH STYLE ,1.58 MM THICK PLATE, 13 MM WIDE AND 19 MM LONG, PKG OF 10 |
vp-scientific |
|
VP 772FN-13-19A |
PTFE Flat Pocket Encasing 4 Parylene Coated 3.4mm Diameter NdFeB Magnets Sandwich Style, Opposite Polarity For Conventional And Horizontal Stirrers, 1.58mm Thick Plate, 13mm Wide And 19mm Long. 10/pkg |
vp-scientific |
|
VP 772FN-13-29 |
PTFE FLAT POCKET ENCASING 4 PARYLENE COATED 7mm DIAMETER NdFeB MAGNETS SANDWICH STYLE, 1.58mm THICK PLATE, 13mm WIDE AND 29mm LONG, PKG OF 10 |
vp-scientific |
|
VP 772FN-13-29A |
PTFE Flat Pocket Encasing 4 Parylene Coated 3.4mm Diameter NdFeb Magnets Sandwich Style, Opposite Polarity For Conventional And Horizontal Stirrers, 1.58mm Thick Plate, 13mm Wide And 19mm Long. 10/pkg |
vp-scientific |
|
VP 772FN-13-29TF |
PTFE FLAT POCKET ENCASING 2 PARYLENE COATED 12 MM DIAMETER NdFeB MAGNETS SANDWICH STYLE ,2.3 MM THICK PLATE, 13 MM WIDE AND 29 MM LONG, WITH TUNING FORK DESIGN WITH EARS AND A SPIN POINT ON ROUND BOTTOM, PKG OF 10 |
vp-scientific |
|
VP 772FN-13-33 |
PTFE FLAT POCKET ENCASING 4 PARYLENE COATED 7mm DIAMETER NdFeB MAGNETS SANDWICH STYLE, 1.58mm THICK PLATE, 13mm WIDE AND 33mm LONG, PKG OF 10 |
vp-scientific |
|
VP 772FN-13-67TFP |
PTFE FLAT POCKET ENCASING 2 PARYLENE COATED 6mm DIAMETER NdFeB MAGNETS SANDWICH STYLE, 2.3mm THICK PLATE, 13mm WIDE AND 67mm LONG, TUNING FORK DESIGN PKG OF 10 |
vp-scientific |
|
VP 772FN-14-34CP |
Sandwich Style Stir Element, cross design, for 6 well microplates, parylene coated NdFeB (48 MGO) magnets, 34 mm diameter x 14 mm height, 80 C maximum operating temperature. 10/pkg |
vp-scientific |
|
VP 772FN-16-30TF |
PTFE FLAT POCKET ENCASING 2 PARYLENE COATED 12 MM DIAMETER NdFeB MAGNETS SANDWICH STYLE ,2.3 MM THICK PLATE, 16 MM WIDE AND 30 MM LONG, WITH TUNING FORK DESIGN WITH EARS AND A SPIN POINT ON FLAT BOTTOM, PKG OF 25 |
vp-scientific |
|
VP 772FN-17-120A-150 |
VP 772FN-17-120A-150 Sandwich style stir element. Made from PTFE, 17mm wide, 120mm long and 3.175mm thick with 2 sets of opposing pockets for 8 VP 782N-12-150 magnets, heat stable to 150C. Magnets placed in opposing polarity for conventional magnetic stir |
vp-scientific |
|
VP 772FN-17-45 |
PTFE FLAT POCKET ENCASING 4 PARYLENE COATED 12mm DIAMETER NdFeB MAGNETS SANDWICH STYLE, 1.58mm THICK PLATE, 17mm WIDE AND 45mm LONG, PKG OF 10 |
vp-scientific |
|
VP 772FN-17-4 |
PTFE Flat Pocket Encasing 4 Parylene Coated 12mm Diameter NdFeB Magnets Sandwich Style, Opposite Polarity For Conventional And Horizontal Stirrers, 1.58mm Thick Plate, 17mm Wide And 45mm Long, 10/pkg |
vp-scientific |
|
VP 772FN-17-64 |
PTFE FLAT POCKET ENCASING 4 PARYLENE COATED 12mm DIAMETER NdFeB MAGNETS SANDWICH STYLE, 2.3 mm THICK PLATE, 17mm WIDE AND 64mm LONG, LOW PROFILE STIR ELEMENT PKG OF 10 |
vp-scientific |
|
VP 772FN-17-64A |
PTFE Flat Pocket Encasing 4 Parylene Coated 12mm Diameter NdFeB Magnets Sandwich Style, Opposite Polarity For Conventional And Horizontal Stirrers, 2.3mm Thick Plate, 17mm Wide And 64mm Long, 10/pkg |
vp-scientific |
|
VP 772FN-20-21CV |
Sandwich-Style Stir Element, torpedo cross design. 2.3mm thick PTFE plates (2 mm wide, 21mm long), 80C maximum operating temperature magnet, each |
vp-scientific |
|
VP 772FN-20-21CV-150 |
Sandwich-Style Stir Element, torpedo cross design. 2.3mm thick PTFE plates (2 mm wide, 21mm long), 150C maximum operating temperature magnet, each |
vp-scientific |
|
VP 772FN-24-24 |
PTFE Flat Pocket Encasing 2 Parylene Encapsulated VP 782N-21-PM, Heat Stable to 80C NdFeB Discs 21.1mm In Diameter And 1.37mm Thick, Disc Shape, 4.8mm Thick PTFE – Sandwich Style, 24mm Diameter, 10/pkg |
vp-scientific |
|
VP 772FN-25-105MB |
PPTFE FLAT POCKET ENCASING 2 PARYLENE COATED 12mm DIAMETER NdFeB MAGNETS SANDWICH STYLE, 2.3mm THICK PLATE, 24.8mm WIDE WITH EARS AND 104.7mm LONG, MAGNETIC BEAD DESIGN PKG OF 10 |
vp-scientific |
|
VP 772FN-25-55TF |
PTFE FLAT POCKET ENCASING 2 PARYLENE COATED 12mm DIAMETER NdFeB MAGNETS SANDWICH STYLE, 2.3mm THICK PLATE, 25mm WIDE AND 55mm LONG, TUNING FORK DESIGN PKG OF 10 |
vp-scientific |
|
VP 772FN-5-15V |
PTFE FLAT POCKET ENCASING 2 PARYLENE ENCAPSULATED VP 782N-3 NdFeB DISCS 3.38mm IN DIAMETER AND .635mm THICK, V SHAPE, 1.58 MM FLAT PTFE – SANDWICH STYLE, 5 MM WIDE AND 15 MM LONG, 10/PKG |
vp-scientific |
|
VP 772FN-5-16R |
PTFE FLAT POCKET ENCASING 2 PARYLENE ENCAPSULATED VP 782N-3 NdFeB DISCS 3.38mm IN DIAMETER AND .635mm THICK, RECTANGULAR SHAPE, 1.58 MM FLAT PTFE – SANDWICH STYLE, 5 MM WIDE AND 16 MM LONG, 10/PKG |
vp-scientific |
|
VP 772FN-5-5 |
PTFE FLAT POCKET ENCASING 2 PARYLENE ENCAPSULATED VP 782N-3 NdFeB DISCS, 1.58 MM THICK PTFE – SANDWICH STYLE, 5 MM DIAMETER, 10/PKG |
vp-scientific |
|
VP 772FN-5- |
PTFE Flat Pocket Encasing 2 Parylene Coated 3.4mm Diameter NdFeB Magnets Sandwich Style, 2.27mm Thick, 5.1mm Diameter, 10/pkg |
vp-scientific |
|
VP 772FN-6-16TF |
PTFE FLAT POCKET ENCASING 2 PARYLENE ENCAPSULATED VP 782N-3 NdFeB DISCS 3.38mm IN DIAMETER AND .635mm THICK, TUNING FORK SHAPE, 1.58 MM FLAT PTFE – SANDWICH STYLE, 6.1 MM WIDE AND 16 MM LONG, 10/PKG |
vp-scientific |
|
VP 772FN-6-16TFP |
PTFE FLAT POCKET ENCASING 2 PARYLENE ENCAPSULATED VP 782N-3 NdFeB DISCS 3.38mm IN DIAMETER AND .635mm THICK, TUNING FORK SHAPE, 1.58 MM FLAT PTFE – SANDWICH STYLE, 6.1 MM WIDE WITH A PIVOT POINT AND 16 MM LONG TUNING FORKS WITH WING TIPS, 10/PKG |
vp-scientific |
|
VP 772FN-6-34MB |
PTFE FLAT POCKET ENCASING 2 PARYLENE COATED 3.45mm DIAMETER NdFeB MAGNETS SANDWICH STYLE, 1.58mm THICK PLATE, 5.45mm WIDE AND 33.9mm LONG, MAGNETIC BEAD DESIGN PKG OF 10 |
vp-scientific |
|
VP 772FN-8-8 |
PTFE FLAT POCKET ENCASING 2 PARYLENE ENCAPSULATED VP 782N-6 NdFeB DISCS 1.58 MM THICK PTFE – SANDWICH STYLE, 7.9 MM DIAMETER, 10/PKG |
vp-scientific |
|
VP 772FNU-24 |
PTFE FLAT POCKET ENCASING 2 PARYLENE ENCAPSULATED VP 782N-3 NdFeB DISCS, 1.58 MM THICK PTFE – SANDWICH STYLE, UMBRELLA SHAPE FOR 24 WELL MICROPLATE, 24/PKG |
vp-scientific |
|
VP 772FNU-24P |
POLYCARBONATE SUPPORT PLATE WITH 24 HOLES FOR USE WITH VP 772FNU-24 UMBRELLA STIRRERS |
vp-scientific |
|
VP 772FS-10-35TF |
PTFE FLAT POCKET ENCASING 2 PARYLENE COATED 6 MM DIAMETER SmCo MAGNETS SANDWICH STYLE ,2.3 MM THICK PLATE, 10 MM WIDE AND 35 MM LONG, WITH TUNING FORK DESIGN WITH EARS AND A SPIN POINT ON ROUND BOTTOM, PKG OF 10 |
vp-scientific |
|
VP 772FS-13-13 |
PTFE FLAT POCKET ENCASING 2 PARYLENE COATED VP 782S-12 SmCo MAGNETS SANDWICH STYLE ,1.58 MM THICK DISC, 13.1 MM DIAMETER, PKG OF 10 |
vp-scientific |
|
VP 772FS-13-19 |
PTFE FLAT POCKET ENCASING 4 PARYLENE COATED 3.4mm DIAMETER SmCo MAGNETS SANDWICH STYLE, 1.58mm THICK PLATE, 13mm WIDE AND 19mm LONG, PKG OF 10 |
vp-scientific |
|
VP 772FS-13-19A |
PTFE Flat Pocket Encasing 4 Parylene Coated 3.4mm Diameter SmCo Magnets Sandwich Style, Opposite Polarity For Conventional And Horizontal Stirrers, 1.58mm Thick Plate, 13mm Wide And 19mm Long. 10/pkg |
vp-scientific |
|
VP 772FS-13-29 |
PTFE FLAT POCKET ENCASING 4 PARYLENE COATED 7 MM DIAMETER SmCo MAGNETS SANDWICH STYLE ,1.58 MM THICK PLATE, 13 MM WIDE AND 29 MM LONG, PKG OF 10 |
vp-scientific |
|
VP 772FS-13-29A |
PTFE Flat Pocket Encasing 4 Parylene Coated 3.4mm Diameter SmCo Magnets Sandwich Style, Opposite Polarity For Conventional And Horizontal Stirrers, 1.58mm Thick Plate, 13mm Wide And 19mm Long. 10/pkg |
vp-scientific |
|
VP 772FS-13-29TF |
PTFE FLAT POCKET ENCASING 2 PARYLENE COATED 12 MM DIAMETER SmCo MAGNETS SANDWICH STYLE ,2.3 MM THICK PLATE, 13 MM WIDE AND 29 MM LONG, WITH TUNING FORK DESIGN WITH EARS AND A SPIN POINT ON BOTTOM PKG OF 10 |
vp-scientific |
|
VP 772FS-13-33 |
PTFE FLAT POCKET ENCASING 4 PARYLENE COATED 7 MM DIAMETER SmCo MAGNETS SANDWICH STYLE ,1.58 MM THICK PLATE, 13 MM WIDE AND 33 MM LONG, PKG OF 10 |
vp-scientific |
|
VP 772FS-13-33A |
PTFE flat pocket encasing 4 parylene coated 7 mm diameter SmCo magnets, sandwich style, opposite polarity for conventional and horizontal stirrers, 1.58 mm thick plate, 13 mm wide and 33 mm long. 10/pkg |
vp-scientific |
|
VP 772FS-13-67TFP |
PTFE FLAT POCKET ENCASING 2 PARYLENE COATED 6mm DIAMETER SmCo MAGNETS SANDWICH STYLE, 2.3mm THICK PLATE, 13mm WIDE AND 67mm LONG, TUNING FORK DESIGN PKG OF 10 |
vp-scientific |
|
VP 772FS-16-30TF |
PTFE FLAT POCKET ENCASING 2 PARYLENE COATED 12 MM DIAMETER SmCo MAGNETS SANDWICH STYLE ,2.3 MM THICK PLATE, 16 MM WIDE AND 30 MM LONG, WITH TUNING FORK DESIGN WITH EARS AND A SPIN POINT ON FLAT BOTTOM, PKG OF 10 |
vp-scientific |
|
VP 772FS-17-45 |
PTFE FLAT POCKET ENCASING 4 PARYLENE COATED 12 MM DIAMETER SmCo MAGNETS SANDWICH STYLE ,1.58 MM THICK PLATE, 17 MM WIDE AND 45 MM LONG, PKG OF 10 |
vp-scientific |
|
VP 772FS-17-4 |
PTFE Flat Pocket Encasing 4 Parylene Coated 12mm Diameter SmCo Magnets Sandwich Style, Opposite Polarity For Conventional And Horizontal Stirrers, 1.58mm Thick Plate, 17mm Wide And 45mm Long, 10/pkg |
vp-scientific |
|
VP 772FS-19-120A |
VP 772FS-19-120A1 Sandwich style stir element. Made from PTFE, 19mm wide, 120mm long and 5.17mm thick with 2 slots 6.36mm wide and 31.76 mm long with 2 sets of opposing pockets for 4 VP 779-13 magnets, heat stable to 300C. Magnets placed in opposing polar |
vp-scientific |
|
VP 772FS-20-21CV |
Sandwich-Style Stir Element, torpedo cross design. 2.3mm thick PTFE plates (2 mm wide, 21mm long), 200C maximum operating temperature magnet, each |
vp-scientific |
|
VP 772FS-24-24 |
PTFE Flat Pocket Encasing 4 Parylene Coated VP 782S-21 SmCo Magnets Sandwich Style 4.8mm Thick Disc, 24.1mm Diameter, 10/pkg |
vp-scientific |
|
VP 772FS-25-105MB |
PTFE FLAT POCKET ENCASING 2 PARYLENE COATED 12mm DIAMETER Sm Co MAGNETS SANDWICH STYLE, 2.3mm THICK PLATE, 24.8mm WIDE WITH EARS AND 104.7mm LONG, MAGNETIC BEAD DESIGN PKG OF 10 |
vp-scientific |
|
VP 772FS-25-55TF |
PTFE FLAT POCKET ENCASING 2 PARYLENE COATED 12 MM DIAMETER SmCo MAGNETS (VP 782S-12) SANDWICH STYLE ,2.3 MM THICK PLATE, 25 MM WIDE AND 55 MM LONG, TUNING FORK DESIGN PKG OF 10 |
vp-scientific |
|
VP 772FS-5-15V |
PTFE FLAT POCKET ENCASING 2 PARYLENE ENCAPSULATED VP 782S-3 SmCo DISCS 3.38mm IN DIAMETER AND .635mm THICK, V SHAPE, 1.58mm FLAT PTFE – SANDWICH STYLE, 5mm WIDE AND 15mm LONG, 10/PKG |
vp-scientific |
|
VP 772FS-5-16R |
PTFE FLAT POCKET ENCASING 2 PARYLENE ENCAPSULATED VP 782S-3 SmCo DISCS 3.38mm IN DIAMETER AND .635mm THICK, RECTANGULAR SHAPE, 1.58mm FLAT PTFE – SANDWICH STYLE, 5mm WIDE AND 16mm LONG, 10/PKG |
vp-scientific |
|
VP 772FS-5-5 |
PTFE FLAT POCKET ENCASING 2 PARYLENE ENCAPSULATED VP 782N-3 SmCo DISCS, 1.58 MM THICK PTFE – SANDWICH STYLE, 5 MM DIAMETER, 10/PKG |
vp-scientific |
|
VP 772FS-6-16TF |
PTFE FLAT POCKET ENCASING 2 PARYLENE ENCAPSULATED VP 782S-3 SmCo DISCS 3.38mm IN DIAMETER AND .635mm THICK, TUNING FORK SHAPE, 1.58 MM FLAT PTFE – SANDWICH STYLE, 6.1 MM WIDE AND 16 MM LONG, 10/PKG |
vp-scientific |
|
VP 772FS-6-16TFP |
PTFE FLAT POCKET ENCASING 2 PARYLENE ENCAPSULATED VP 782S-3 SmCo DISCS 3.38mm IN DIAMETER AND .635mm THICK, TUNING FORK SHAPE, 1.58 MM FLAT PTFE – SANDWICH STYLE, 6.1 MM WIDE WITH A PIVOT POINT AND 16 MM LONG TUNING FORKS WITH WING TIPS, 10/PKG |
vp-scientific |
|
VP 772FS-6-34MB |
PTFE FLAT POCKET ENCASING 2 PARYLENE COATED 3.45mm DIAMETER SmCo MAGNETS SANDWICH STYLE, 1.58mm THICK PLATE, 5.45mm WIDE AND 33.9mm LONG, MAGNETIC BEAD DESIGN PKG OF 10 |
vp-scientific |
|
VP 772FS-8-8 |
PTFE FLAT POCKET ENCASING 2 PARYLENE COATED VP 782S-6 SmCo MAGNETS SANDWICH STYLE 1.58 MM THICK DISC, 7.9 MM DIAMETER, PKG OF 10 |
vp-scientific |
|
VP 772FSU-24 |
VP 772FSU-24 PTFE Flat Pocket Encasing 2 Parylene Encapsulated VP 782S-3 SmCo Discs, 1.58mm Thick PTFE – Sandwich Style, Umbrella Shape For 24 Well Microplate, 24/pkg |
vp-scientific |
|
VP 772M-N52-15-57 |
Sandwich-Style Stir Paddle – Made from 2.75mm thick Nylon-12, 15.1mm wheel diameter, 57.1mm long, with 3 sets of opposing pockets for 8 VP 782N-12 magnets, heat stable to 80C, Magnets placed in uniform polarity. Each |
vp-scientific |
|
VP 772M-N52-27-111 |
Sandwich-Style Stir Paddle – Made from 4.5mm thick Nylon-12, 26.4mm wheel diameter, 111.8mm long, with 4 sets of opposing pockets for 8 VP 782N-21 magnets, heat stable to 80C, Magnets placed in uniform polarity. Each |
vp-scientific |
|
VP 772M-N52-27-60 |
Sandwich-Style Stir Paddle – Made from 4.5mm thick Nylon-12, 26.4mm wheel diameter, 61mm long, with 2 sets of opposing pockets for 4 VP 782N-21 magnets, heat stable to 80C, Magnets placed in uniform polarity. Each |
vp-scientific |
|
VP 772M-N52-27-85 |
Sandwich-Style Stir Paddle – Made from 4.5mm thick Nylon-12, 26.4mm wheel diameter, 86.5mm long, with 3 sets of opposing pockets for 6 VP 782N-21 magnets, heat stable to 80C, Magnets placed in uniform polarity. Each |
vp-scientific |
|
VP 772PF3 |
3D Printed Single Magnetic Separation Stand For 1.5ml Micro-Centrifuge Tubes With One 6.35mm Diameter And 6.35mm Tall Magnetic Cylinder Made From 52 MGO NdFeB. White ABS. |
vp-scientific |
|
VP 772PF5 |
3D Printed Single Magnetic Separation Stand For 1.5ml Micro-Centrifuge Tubes With Two 0.250″ Diameter And 0.250″ Tall magnetic cylinders. White ABS. |
vp-scientific |
|
VP 772PT-13-41 |
Magnetic Stir Bar – 12.7mm Diameter, 41.4mm Long. PEEK Tube Capped With Polypropylene Set Screws Encasing Parylene Coated VP 782NC- 8- 13, NdFeB (48 MGO), 80C Maximum Operating Temperature Magnet. 10/Pkg. |
vp-scientific |
|
VP 772PT-13-41-150 |
Magnetic Stir Bar – 12.7mm Diameter, 41.4mm Long. PEEK Tube Capped With Polypropylene Set Screws Encasing Parylene Coated VP 782NC-8-13-150, NdFeB (42 MGO), 150C Maximum Operating Temperature Magnet. 10/Pkg. |
vp-scientific |
|
VP 772PT-13-54 |
Magnetic Stir Bar – 12.7mm Diameter, 54.2mm Long. PEEK Tube Capped With Polypropylene Set Screws Encasing Parylene Coated VP 782NC- 8- 13, NdFeB (48 MGO), 80C Maximum Operating Temperature Magnet. 10/Pkg. |
vp-scientific |
|
VP 772PT-13-54-150 |
Magnetic Stir Bar – 12.7mm Diameter, 54.2mm Long. PEEK Tube Capped With Polypropylene Set Screws Encasing Parylene Coated VP 782NC-8-13-150, NdFeB (42 MGO), 150C Maximum Operating Temperature Magnet. 10/Pkg. |
vp-scientific |
|
VP 772PT-13-67 |
Magnetic Stir Bar – 12.7mm Diameter, 67.1mm Long. PEEK Tube Capped With Polypropylene Set Screws Encasing Parylene Coated VP 782NC- 8- 13, NdFeB (48 MGO), 80C Maximum Operating Temperature Magnet. 10/Pkg. |
vp-scientific |
|
VP 772PT-13-67-150 |
Magnetic Stir Bar – 12.7mm Diameter, 67.1mm Long. PEEK Tube Capped With Polypropylene Set Screws Encasing Parylene Coated VP 782NC-8-13-150, NdFeB (42 MGO), 150C Maximum Operating Temperature Magnet. 10/Pkg. |
vp-scientific |
|
VP 772PT-13-80 |
Magnetic Stir Bar – 12.7mm Diameter, 79.9mm Long. PEEK Tube Capped With Polypropylene Set Screws Encasing Parylene Coated VP 782NC- 8- 13, NdFeB (48 MGO), 80C Maximum Operating Temperature Magnet. 10/Pkg. |
vp-scientific |
|
VP 772PT-13-80-150 |
Magnetic Stir Bar – 12.7mm Diameter, 79.9mm Long. PEEK Tube Capped With Polypropylene Set Screws Encasing Parylene Coated VP 782NC-8-13-150, NdFeB (42 MGO), 150C Maximum Operating Temperature Magnet. 10/Pkg. |
vp-scientific |
|
VP 772PT-25-80OV-150 |
Oval Shaped Black PEEK Stir Element, 25.4mm In Diameter And 80mm Long, Turned Down To Oval Shape, With Spin Ring In The Middle. Contains 4 VP 782NC-8-13-150 Magnets And 2 Polypropylene Set Screws, 1/pkg |
vp-scientific |
|
VP 772PT-6-19 |
Magnetic Stir Bar – 6.35mm Diameter, 19.1mm Long. PEEK Tube Capped With Polypropylene Set Screws Encasing Parylene Coated VP 782NC-3-6, NdFeB (48 MGO), 80C Maximum Operating Temperature Magnet. 10/Pkg. |
vp-scientific |
|
VP 772PT-6-19-150 |
Magnetic Stir Bar – 6.35mm Diameter, 19.1mm Long. PEEK Tube Capped With Polypropylene Set Screws Encasing Parylene Coated VP 782NC-3-6-150, NdFeB (42 MGO), 150C Maximum Operating Temperature Magnet. 10/Pkg. |
vp-scientific |
|
VP 772PT-6-25 |
Magnetic Stir Bar – 6.35mm Diameter, 25.3mm Long. PEEK Tube Capped With Polypropylene Set Screws Encasing Parylene Coated VP 782NC-3-6, NdFeB (48 MGO), 80C Maximum Operating Temperature Magnet. 10/Pkg. |
vp-scientific |
|
VP 772PT-6-25-150 |
Magnetic Stir Bar – 6.35mm Diameter, 25.3mm Long. PEEK Tube Capped With Polypropylene Set Screws Encasing Parylene Coated VP 782NC-3-6-150, NdFeB (42 MGO), 150C Maximum Operating Temperature Magnet. 10/Pkg. |
vp-scientific |
|
VP 772PT-6-32 |
Magnetic Stir Bar – 6.35mm Diameter, 31.6mm Long. PEEK Tube Capped With Polypropylene Set Screws Encasing Parylene Coated VP 782NC-3-6, NdFeB (48 MGO), 80C Maximum Operating Temperature Magnet. 10/Pkg. |
vp-scientific |
|
VP 772PT-6-32-150 |
Magnetic Stir Bar – 6.35mm Diameter, 31.6mm Long. PEEK Tube Capped With Polypropylene Set Screws Encasing Parylene Coated VP 782NC-3-6-150, NdFeB (42 MGO), 150C Maximum Operating Temperature Magnet. 10/Pkg. |
vp-scientific |
|
VP 772PT-6-38 |
Magnetic Stir Bar – 6.35mm Diameter, 37.8mm Long. PEEK Tube Capped With Polypropylene Set Screws Encasing Parylene Coated VP 782NC-3-6, NdFeB (48 MGO), 80C Maximum Operating Temperature Magnet. 10/Pkg. |
vp-scientific |
|
VP 772PT-6-38-150 |
Magnetic Stir Bar – 6.35mm Diameter, 37.8mm Long. PEEK Tube Capped With Polypropylene Set Screws Encasing Parylene Coated VP 782NC-3-6-150, NdFeB (42 MGO), 150C Maximum Operating Temperature Magnet. 10/Pkg. |
vp-scientific |
|
VP 772PT-6-44 |
Magnetic Stir Bar – 6.35mm Diameter, 44.1mm Long. PEEK Tube Capped With Polypropylene Set Screws Encasing Parylene Coated VP 782NC-3-6, NdFeB (48 MGO), 80C Maximum Operating Temperature Magnet. 10/Pkg. |
vp-scientific |
|
VP 772PT-6-44-150 |
Magnetic Stir Bar – 6.35mm Diameter, 44.1mm Long. PEEK Tube Capped With Polypropylene Set Screws Encasing Parylene Coated VP 782NC-3-6-150, NdFeB (42 MGO), 150C Maximum Operating Temperature Magnet. 10/Pkg. |
vp-scientific |
|
VP 772PT-6-51 |
Magnetic Stir Bar – 6.35mm Diameter, 50.3mm Long. PEEK Tube Capped With Polypropylene Set Screws Encasing Parylene Coated VP 782NC-3-6, NdFeB (48 MGO), 80C Maximum Operating Temperature Magnet. 10/Pkg. |
vp-scientific |
|
VP 772PT-6-51-150 |
Magnetic Stir Bar – 6.35mm Diameter, 50.3mm Long. PEEK Tube Capped With Polypropylene Set Screws Encasing Parylene Coated VP 782NC-3-6-150, NdFeB (42 MGO), 150C Maximum Operating Temperature Magnet. 10/Pkg. |
vp-scientific |
|
VP 772PT-6-57 |
Magnetic Stir Bar – 6.35mm Diameter, 56.6mm Long. PEEK Tube Capped With Polypropylene Set Screws Encasing Parylene Coated VP 782NC-3-6, NdFeB (48 MGO), 80C Maximum Operating Temperature Magnet. 10/Pkg. |
vp-scientific |
|
VP 772PT-6-57-150 |
Magnetic Stir Bar – 6.35mm Diameter, 56.6mm Long. PEEK Tube Capped With Polypropylene Set Screws Encasing Parylene Coated VP 782NC-3-6-150, NdFeB (42 MGO), 150C Maximum Operating Temperature Magnet. 10/Pkg. |
vp-scientific |
|
VP 772PT-6-63 |
Magnetic Stir Bar – 6.35mm Diameter, 62.8mm Long. PEEK Tube Capped With Polypropylene Set Screws Encasing Parylene Coated VP 782NC-3-6, NdFeB (48 MGO), 80C Maximum Operating Temperature Magnet. 10/Pkg. |
vp-scientific |
|
VP 772PT-6-63-150 |
Magnetic Stir Bar – 6.35mm Diameter, 62.8mm Long. PEEK Tube Capped With Polypropylene Set Screws Encasing Parylene Coated VP 782NC-3-6-150, NdFeB (42 MGO), 150C Maximum Operating Temperature Magnet. 10/Pkg. |
vp-scientific |
|
VP 772T-11-16 |
PTFE TUBE ENCASING A PARYLENE COATED NdFeB MAGNET SANDWICH STYLE , 11.4 MM DIAMETER, 16MM LONG, PKG OF 10 |
vp-scientific |
|
VP 772T-11-19 |
PTFE TUBE ENCASING A PARYLENE COATED NdFeB MAGNET SANDWICH STYLE , 11.4 MM DIAMETER, 19MM LONG, PKG OF 10 |
vp-scientific |
|
VP 772T-11-28 |
PTFE TUBE ENCASING A PARYLENE COATED NdFeB MAGNET SANDWICH STYLE , 11.4 MM DIAMETER, 27.9MM LONG, PKG OF 10 |
vp-scientific |
|
VP 772T-11-32 |
PTFE TUBE ENCASING A PARYLENE COATED NdFeB MAGNET SANDWICH STYLE , 11.4 MM DIAMETER, 32MM LONG, PKG OF 10 |
vp-scientific |
|
VP 772T-11-34 |
PTFE TUBE ENCASING A PARYLENE COATED NdFeB MAGNET SANDWICH STYLE , 11.4 MM DIAMETER, 34MM LONG, PKG OF 10 |
vp-scientific |
|
VP 772T-11-41 |
PTFE TUBE ENCASING A PARYLENE COATED NdFeB MAGNET SANDWICH STYLE , 11.4 MM DIAMETER, 40.6MM LONG, PKG OF 10 |
vp-scientific |
|
VP 772T-11-47 |
PTFE TUBE ENCASING A PARYLENE COATED NdFeB MAGNET SANDWICH STYLE , 11.4 MM DIAMETER, 47MM LONG, PKG OF 10 |
vp-scientific |
|
VP 772T-11-54 |
PTFE TUBE ENCASING A PARYLENE COATED NdFeB MAGNET SANDWICH STYLE , 11.4 MM DIAMETER, 53.5MM LONG, PKG OF 10 |
vp-scientific |
|
VP 772T-11-67 |
PTFE TUBE ENCASING A PARYLENE COATED NdFeB MAGNET SANDWICH STYLE , 11.4 MM DIAMETER, 66.6MM LONG, PKG OF 10 |
vp-scientific |
|
VP 772T-6-11 |
PTFE TUBE ENCASING A PARYLENE COATED NdFeB MAGNET SANDWICH STYLE , 6.35 MM DIAMETER, 10.7 MM LONG, PKG OF 10 |
vp-scientific |
|
VP 772T-6-15 |
PTFE TUBE ENCASING A PARYLENE COATED NdFeB MAGNET SANDWICH STYLE , 6.35 MM DIAMETER, 15.1 MM LONG, PKG OF 10 |
vp-scientific |
|
VP 772T-6-22 |
PTFE TUBE ENCASING A PARYLENE COATED NdFeB MAGNET SANDWICH STYLE , 6.35 MM DIAMETER, 21.7 MM LONG, PKG OF 10 |
vp-scientific |
|
VP 772T-6-28 |
PTFE TUBE ENCASING A PARYLENE COATED NdFeB MAGNET SANDWICH STYLE , 6.35 MM DIAMETER, 27.7MM LONG, PKG OF 10 |
vp-scientific |
|
VP 772T-6-34 |
PTFE TUBE ENCASING A PARYLENE COATED NdFeB MAGNET SANDWICH STYLE , 6.35 MM DIAMETER, 34.2 MM LONG, PKG OF 10 |
vp-scientific |
|
VP 772T-6-41 |
PTFE TUBE ENCASING A PARYLENE COATED NdFeB MAGNET SANDWICH STYLE , 6.35 MM DIAMETER, 41.4 MM LONG, PKG OF 10 |
vp-scientific |
|
VP 772T-6-48 |
PTFE TUBE ENCASING A PARYLENE COATED NdFeB MAGNET SANDWICH STYLE , 6.35 MM DIAMETER, 47.6 MM LONG, PKG OF 10 |
vp-scientific |
|
VP 772T-6-54 |
PTFE TUBE ENCASING A PARYLENE COATED NdFeB MAGNET SANDWICH STYLE , 6.35 MM DIAMETER, 53.8 MM LONG, PKG OF 10 |
vp-scientific |
|
VP 772T-6-61 |
PTFE TUBE ENCASING A PARYLENE COATED NdFeB MAGNET SANDWICH STYLE , 6.35 MM DIAMETER, 60.8 MM LONG, PKG OF 10 |
vp-scientific |
|
VP 772T-6-68 |
PTFE TUBE ENCASING A PARYLENE COATED NdFeB MAGNET SANDWICH STYLE , 6.35 MM DIAMETER, 67.5 MM LONG, PKG OF 10 |
vp-scientific |
|
VP 772T-6-74 |
PTFE TUBE ENCASING A PARYLENE COATED NdFeB MAGNET SANDWICH STYLE , 6.35 MM DIAMETER, 74.2 MM LONG, PKG OF 10 |
vp-scientific |
|
VP 772T-6-81 |
PTFE TUBE ENCASING A PARYLENE COATED NdFeB MAGNET SANDWICH STYLE , 6.35 MM DIAMETER, 80.3MM LONG, PKG OF 10 |
vp-scientific |
|
VP 772T-6-87 |
PTFE TUBE ENCASING A PARYLENE COATED NdFeB MAGNET SANDWICH STYLE , 6.35 MM DIAMETER, 87.2MM LONG, PKG OF 10 |
vp-scientific |
|
VP 773-10 |
STIR CROSS, 10mm DIAMETER X 5mm THICK, PTFE ENCAPSULATED ALNICO MAGNET, PKG OF 10 |
vp-scientific |
|
VP 773-19 |
STIR CROSS, PTFE ENCAPSULATED MAGNETIC STIR BARS (ALNICO) 19mm DIAMETER X 8mm THICK, 10/PKG |
vp-scientific |
|
VP 773D-10 |
STIR DISC CROSS, 10mm DIAMETER X 6mm THICK, PTFE ENCAPSULATED ALNICO MAGNET, PKG OF 10 |
vp-scientific |
|
VP 773D-20 |
STIR DISC CROSS, 20mm DIAMETER X 10mm thick, PTFE ENCAPSULATED ALNICO MAGNET, PKG OF 10 |
vp-scientific |
|
VP 773D-9 |
STIR DISC CROSS, 9mm DIAMETER X 6mm THICK, PTFE ENCAPSULATED ALNICO MAGNET, 10/PKG |
vp-scientific |
|
VP 773DC-10 |
STIR DOUBLE CROSS HEAD, 10mm DIAMETER X 8mm THICK, PTFE ENCAPSULATED ALNICO MAGNET, PKG OF 10 |
vp-scientific |
|
VP 773DC-14 |
STIR DOUBLE CROSS HEAD, 14mm DIAMETER X 10mm THICK, PTFE ENCAPSULATED ALNICO MAGNET, PKG OF 10 |
vp-scientific |
|
VP 773I-9 |
INVERTED CROSS CUVETTE STIRRER, 9 MM DIAMETER X 8.3 MM TALL, PTFE ENCAPSULATED ALNICO MAGNET, 10/PKG |
vp-scientific |
|
VP 773W-10,16 |
WING STIRRER, 10mm WIDE AND 16mm TALL, PTFE ENCAPSULATED ALNICO MAGNET, PACKAGE OF 10 |
vp-scientific |
|
VP 773W-13,13 |
WING STIRRER, 13mm WIDE AND 13mm TALL, PTFE ENCAPSULATED ALNICO MAGNET, PACKAGE OF 10 |
vp-scientific |
|
VP 773W-13,22 |
WING STIRRER, 13mm WIDE AND 22mm TALL, PTFE ENCAPSULATED ALNICO MAGNET, PACKAGE OF 10 |
vp-scientific |
|
VP 773W-5,9 |
WING STIRRER, 5.4mm WIDE AND 9.2mm TALL, PTFE ENCAPSULATED ALNICO MAGNET, PACKAGE OF 10 |
vp-scientific |
|
VP 773W-8,11 |
WING STIRRER, 8 MM WIDE AND 11 MM TALL, PTFE ENCAPSULATED ALNICO MAGNET, PACKAGE OF 10 |
vp-scientific |
|
VP 774-15 |
ROUND PTFE ENCAPSULATED MAGNETIC STIR BARS (ALNICO) 15 MM LONG X 1.5 MM DIAMETER, 10/PKG |
vp-scientific |
|
VP 774-2 |
ROUND PTFE ENCAPSULATED MAGNETIC STIR BARS (ALNICO) 2 MM LONG X 2 MM DIAMETER, 10/PKG |
vp-scientific |
|
VP 774-5 |
ROUND PTFE ENCAPSULATED MAGNETIC STIR BARS (ALNICO) 5 MM LONG X 2 MM DIAMETER, 10/PKG |
vp-scientific |
|
VP 774-7 |
ROUND PTFE ENCAPSULATED MAGNETIC STIR BARS (ALNICO) 7 MM LONG X 2 MM DIAMETER, 10/PKG |
vp-scientific |
|
VP 774-8 |
ROUND PTFE ENCAPSULATED MAGNETIC STIR BARS (ALNICO) 8 MM LONG X 1.5 MM DIAMETER, 10/PKG |
vp-scientific |
|
VP 775-10 |
ROUND PTFE ENCAPSULATED MAGNETIC STIR BARS (ALNICO) 10 MM LONG X 3 MM DIAMETER, 10/PKG |
vp-scientific |
|
VP 775-12 |
ROUND PTFE ENCAPSULATED MAGNETIC STIR BARS (ALNICO) 12 MM LONG X 3 MM DIAMETER, 100/PKG |
vp-scientific |
|
VP 775-13 |
ROUND PTFE ENCAPSULATED MAGNETIC STIR BARS (ALNICO) 13 MM LONG X 3 MM DIAMETER, 10/PKG |
vp-scientific |
|
VP 775-20 |
ROUND PTFE ENCAPSULATED MAGNETIC STIR BARS (ALNICO) 20 MM LONG X 3 MM DIAMETER, 10/PKG |
vp-scientific |
|
VP 775-3 |
ROUND PTFE ENCAPSULATED MAGNETIC STIR BARS (ALNICO) 3 MM LONG X 3 MM DIAMETER, 10/PKG |
vp-scientific |
|
VP 775-30 |
ROUND PTFE ENCAPSULATED MAGNETIC STIR BARS (ALNICO) 30 MM LONG X 3 MM DIAMETER, 10/PKG |
vp-scientific |
|
VP 775-35 |
ROUND PTFE ENCAPSULATED MAGNETIC STIR BARS (SAMARIUM COBALT) 35 MM LONG X 3 MM DIAMETER, 10/PKG |
vp-scientific |
|
VP 775-6 |
ROUND PTFE ENCAPSULATED MAGNETIC STIR BARS (ALNICO) 6 MM LONG X 3 MM DIAMETER, 10/PKG |
vp-scientific |
|
VP 775-8 |
ROUND PTFE ENCAPSULATED MAGNETIC STIR BARS (ALNICO) 8 MM LONG X 3 MM DIAMETER, 10/PKG |
vp-scientific |
|
VP 775-A |
AUTOCLAVEABLE DROP DISPENSER THAT LOADS VP 775-6, VP 775-8, VP 775-10 AND VP 775-12 PTFE MAGNETIC STIR BARS INTO 48 TEST TUBES (12 mm DIAMETER, 75 mm LONG ON 14 mm CENTERS), INCLUDES VP 771 |
vp-scientific |
|
VP 776-10-80 |
Tapered, PTFE encapsulated Alnico Stir Bar Magnet, 80mm x 10mm – Price Each |
vp-scientific |
|
VP 776-12-165 |
Round PTFE encapsulated Magnetic Stir Bars (Alnico) 165mm (+/- 8mm) long x 12mm (+/- 1.2mm) diameter, each |
vp-scientific |
|
VP 776-15 |
OVAL PTFE ENCAPSULATED ALNICO MAGNET, 15mm X 6mm, 10/PKG |
vp-scientific |
|
VP 776-24-108R |
Giant Stir Bar, Smooth No Ridges, With Permanent Pivot Ring,PTFE encapsulated Alnico Stir Bar Magnet, 108mm x 24mm – Price Each |
vp-scientific |
|
VP 776-24-159R |
Giant Stir Bar, Smooth No Ridges, With Permanent Pivot Ring,PTFE encapsulated Alnico Stir Bar Magnet, 159mm x 24mm – Price Each |
vp-scientific |
|
VP 776-25 |
ROUND PTFE ENCAPSULATED MAGNETIC STIR BARS (ALNICO) 25 MM LONG X 8 MM DIAMETER, 10/PKG |
vp-scientific |
|
VP 776-25-108RR |
Giant Stir Bar, Smooth No Ridges, PTFE encapsulated Alnico Stir Bar Magnet, 108mm x 25mm – Price Each |
vp-scientific |
|
VP 776-25-157RR |
Giant Stir Bar, Smooth No Ridges, PTFE encapsulated Alnico Stir Bar Magnet, 157mm x 25mm – Price Each |
vp-scientific |
|
VP 776-27-108 |
Round PTFE encapsulated Magnetic Stir Bars (Alnico) 108mm (+/- 5.4mm) long x 27mm (+/- 2.7mm) diameter, each |
vp-scientific |
|
VP 776-27-159 |
Round PTFE encapsulated Magnetic Stir Bars (Alnico) 159mm (+/- 8mm) long x 27mm (+/- 2.7mm) diameter, each |
vp-scientific |
|
VP 776-30-100OV |
Oval, football shaped, PTFE encapsulated Alnico Stir Bar Magnet, 100mm x 30mm – Price Each |
vp-scientific |
|
VP 776-36-108P |
Prism or Triangle shaped, PTFE encapsulated Alnico Stir Bar Magnet, 108mm x 36mm – Price Each |
vp-scientific |
|
VP 776-36-136P |
Prism or Triangle shaped, PTFE encapsulated Alnico Stir Bar Magnet, 136mm x 36mm – Price Each |
vp-scientific |
|
VP 776-40 |
ROUND PTFE ENCAPSULATED MAGNETIC STIR BARS (ALNICO) 40 MM LONG X 8 MM DIAMETER, 10/PKG |
vp-scientific |
|
VP 776-40-150OV |
Oval, football shaped, PTFE encapsulated Alnico Stir Bar Magnet, 150mm x 40mm – Price Each |
vp-scientific |
|
VP 776-50 |
ROUND PTFE ENCAPSULATED MAGNETIC STIR BARS (ALNICO) 50 MM LONG X 8 MM DIAMETER, 10/PKG |
vp-scientific |
|
VP 777-30 |
ROUND PTFE ENCAPSULATED MAGNETIC STIR BARS (RARE EARTH) 30 MM LONG X 6 MM DIAMETER, 10/PKG |
vp-scientific |
|
VP 777-38 |
OCTAHEDRAL PTFE ENCAPSULATED MAGNETIC STIR BARS (RARE EARTH) 38 MM LONG X 8 MM DIAMETER, 10/PKG |
vp-scientific |
|
VP 777-40 |
ROUND PTFE ENCAPSULATED MAGNETIC STIR BARS (RARE EARTH) 40 MM LONG X 8 MM DIAMETER, 10/PKG |
vp-scientific |
|
VP 777-51 |
ROUND PTFE ENCAPSULATED MAGNETIC STIR BARS (RARE EARTH) 51 MM LONG X 8 MM DIAMETER, 10/PKG |
vp-scientific |
|
VP 777OV-64 |
OVAL RARE EARTH PTFE ENCAPSULATED MAGNETIC STIR BARS 64 MM LONG X 20 MM DIAMETER, 10/PKG |
vp-scientific |
|
VP 778-12 |
SQUARE PTFE ENCAPSULATED MAGNETIC STIR BARS (ALNICO) 12 MM LONG X 4 MM X 4 MM, 100/PKG |
vp-scientific |
|
VP 778-25 |
SQUARE PTFE ENCAPSULATED MAGNETIC STIR BARS (ALNICO) 25 MM LONG X 5.5 MM X 5.5 MM, 10/PKG |
vp-scientific |
|
VP 778-35 |
SQUARE PTFE ENCAPSULATED MAGNETIC STIR BARS (ALNICO) 35 MM LONG X 6 MM X 6 MM, 100/PKG |
vp-scientific |
|
VP 778-50 |
SQUARE PTFE ENCAPSULATED MAGNETIC STIR BARS (ALNICO) 50 MM LONG X 7.5 MM X 7.5 MM, 10/PKG |
vp-scientific |
|
VP 779-13 |
DISC, PTFE ENCAPSULATED MAGNETIC STIR DISCS (SAMARIUM COBALT) 13 MM DIAMETER X 1.7 THICK, 10/PKG |
vp-scientific |
|
VP 779-5 |
DISC, PTFE ENCAPSULATED MAGNETIC STIR DISCS (SAMARIUM COBALT) 5 MM DIAMETER X 1.8 THICK, 12/PKG |
vp-scientific |
|
VP 779- |
Drop dispenser – 96 holes for VP 772FN5-5, VP 772FS5-5 and VP 779-5 PTFE stir discs, system includes a VP 770B magnetic loading block |
vp-scientific |
|
VP 779-6 |
DISC, NICKEL COATED MAGNETIC STIR DISCS (SAMARIUM COBALT) 6.3 MM DIAMETER X 2.5 MM THICK, 10/PKG |
vp-scientific |
|
VP 781 |
DEMAGNETIZER – 9″ x 4-5/8″ x 3-3/8″ – POLE AREA OF 6 SQUARE INCHES,120 Volts |
vp-scientific |
|
VP 781A |
DEMAGNETIZER, 230 VOLTS OR 120 VOLTS |
vp-scientific |
|
VP 782N-12 |
NdFeB (48MGO) MAGNETIC TUMBLE STIR DISCS, 11.5mm IN DIAMETER AND .73mm THICK, COATED WITH 0.05mm THICK PARYLENE, 10/PKG |
vp-scientific |
|
VP 782N-21 |
NdFeB (48MGO) MAGNETIC TUMBLE STIR DISCS, 21.18mm IN DIAMETER AND 1.37mm THICK, COATED WITH 0.05mm THICK PARYLENE, 10/PKG |
vp-scientific |
|
VP 782N-3 |
NdFeB (48MGO) MAGNETIC TUMBLE STIR DISCS, 3.4mm IN DIAMETER AND .73mm THICK, COATED WITH 0.05mm THICK PARYLENE, 100/PKG |
vp-scientific |
|
VP 782N-6 |
NdFeB (48MGO) MAGNETIC TUMBLE STIR DISCS, 6.4mm IN DIAMETER AND .73mm THICK, COATED WITH 0.05mm THICK PARYLENE, 10/PKG |
vp-scientific |
|
VP 782NC-2-6 |
NDFEB (48MGO) MAGNETIC TUMBLE STIR CYLINDERS, DIAMETER 2.15MM X 6.44MM. COATED WITH 0.05MM THICK PARYLENE, 10/PKG |
vp-scientific |
|
VP 782NC-3-6 |
NdFeB (48MGO) MAGNETIC TUMBLE STIR CYLINDERS, 3.19mm IN DIAMETER AND 6.45mm LONG, COATED WITH 0.05mm THICK PARYLENE, 10/PKG |
vp-scientific |
|
VP 782NC-3-6R |
STIR BAR RETRIEVER WITH 2.36 MM DIAMETER STAINLESS STEEL BAR 127 MM LONG COUPLED TO A VP 782NC-3-6 |
vp-scientific |
|
VP 782NC-8-13 |
NdFeB (48MGO) MAGNETIC TUMBLE STIR CYLINDERS, 7.95mm IN DIAMETER AND 12.8mm LONG, COATED WITH 0.05mm THICK PARYLENE, 10/PKG |
vp-scientific |
|
VP 782S-12 |
SmCo17 MAGNETIC TUMBLE STIR DISCS, 11.5 mm IN DIAMETER AND .73mm THICK, COATED WITH 0.05mm THICK PARYLENE, 10/PKG |
vp-scientific |
|
VP 782S-21 |
SmCo17 MAGNETIC TUMBLE STIR DISCS, 21.18 mm IN DIAMETER AND .73mm THICK, COATED WITH 0.05mm THICK PARYLENE, 10/PKG |
vp-scientific |
|
VP 782S-3 |
SmCo17 MAGNETIC TUMBLE STIR DISCS, 3.4 mm IN DIAMETER AND .73mm THICK, COATED WITH 0.05mm THICK PARYLENE, 100/PKG |
vp-scientific |
|
VP 782S-6 |
SmCo17 MAGNETIC TUMBLE STIR DISCS, 6.4 mm IN DIAMETER AND .73mm THICK, COATED WITH 0.05mm THICK PARYLENE, 10/PKG |
vp-scientific |
|
VP 783NC-3-6 |
NdFeB (48MGO) MAGNETIC TUMBLE STIR CYLINDER, 3.0MM DIAMETER X 6.3MM LONG, MAGNETIZED THROUGH THE LENGTH, NICKEL COATED, 10/PKG |
vp-scientific |
|
VP 783NC-3.5-6 |
NdFeB (48MGO) MAGNETIC TUMBLE STIR CYLINDER, 3.5MM DIAMETER X 6.3MM LONG, MAGNETIZED THROUGH THE DIAMETER, NICKEL COATED, 10/PKG |
vp-scientific |
|
VP 783NC-6-9 |
NdFeB (42MGO)MAGNETIC TUMBLE STIR CYLINDER, 6.4mm DIAMETER, 9.5mm LONG, MAGNETIZED THROUGH THE LENGTH, NICKEL COATED, 10/PKG |
vp-scientific |
|
VP 783NS-3-3-3 |
NdFeB (42MGO) MAGNETIC TUMBLE STIR CUBE, 3.2MM X 3.2MM X 3.2MM), MAGNETIZED THROUGH THE LENGTH, NICKEL COATED, 100/PKG |
vp-scientific |
|
VP 790 |
CYBIO/MATRIX SLIDING PADDLE MIXER |
vp-scientific |
|
VP 791-24 |
TRAPEZE STIRRER FOR 24 VIAL RACK |
vp-scientific |
|
VP 791-96 |
TRAPEZE STIRRER FOR 96 WELL MICROPLATE |
vp-scientific |
|
VP 791PN42-42-32 |
Trapeze-Style Sandwich Stir Element. Flat Paddle Suspended Above Bottom Of Container. PTFE Suspension System (41.7mm Wide, 31.7mm Tall), 150C Maximum Operating Temperature NdFeB (42 MGO) Magnet. Priced Each. |
vp-scientific |
|
VP 791PN42-42-43 |
Trapeze-Style Sandwich Stir Element. Flat Paddle Suspended Above Bottom Of Container. PTFE Suspension System (41.7mm Wide, 43.3mm Tall), 150C Maximum Operating Temperature NdFeB (42 MGO) Magnet. Priced Each. |
vp-scientific |
|
VP 791PN48-42-32 |
Trapeze-Style Sandwich Stir Element. Flat Paddle Suspended Above Bottom Of Container. PTFE Suspension System (41.7mm Wide, 31.7mm Tall), 80C Maximum Operating Temperature NdFeB (48 MGO) Magnet. Priced Each. |
vp-scientific |
|
VP 791PN48-42-43 |
Trapeze-Style Sandwich Stir Element. Flat Paddle Suspended Above Bottom Of Container. PTFE Suspension System (41.7mm Wide, 43.3mm Tall), 80C Maximum Operating Temperature NdFeB (48 MGO) Magnet. Priced Each. |
vp-scientific |
|
VP 791PS29-42-32 |
Trapeze-Style Sandwich Stir Element. Flat Paddle Suspended Above Bottom Of Container. PTFE Suspension System (41.7mm Wide, 31.7mm Tall), 80C Maximum Operating Temperature SmCo (29 MGO) Magnet. Priced Each |
vp-scientific |
|
VP 791PS29-42-43 |
Trapeze-Style Sandwich Stir Element. Flat Paddle Suspended Above Bottom Of Container. PTFE Suspension System (41.7mm Wide, 43.3mm Tall), 80C Maximum Operating Temperature SmCo (29 MGO) Magnet. Priced Each |
vp-scientific |
|
VP 792A |
MAGNETIC BLOCKS AND SUPPORTS FOR DISPOSABLE CYBIO MOVING PADDLE MIXER, EACH SYSTEM |
vp-scientific |
|
VP 792B |
BUBBLE PADDLE STIRRER WITH MAGNETIC CLUTCHES FOR DISPOSABLE CYBIO MOVING PADDLE MIXER, EACH |
vp-scientific |
|
VP 792C |
MAGNETIC RETAINER FOR DISPOSABLE CYBIO MOVING PADDLE MIXER, EACH |
vp-scientific |
|
VP 792D |
DISPOSABLE NALGENE POLYPROPYLENE RESERVOIRS NALGENE #1300-1301, 300 ML VOLUME, 128 MM X 86 MM X 43 MM, STERILE CASE OF 40 |
vp-scientific |
|
VP 792D-1 |
POLYPROPYLENE DETACHABLE OUTLET PORT FOR USE WITH REAGENT RESERVOIRS. CAN BE USED WITH VP BUBBLE PADDLE RESERVOIRS AND AS AN ACCESSORY WITH THE VP 600 SERIES LIQUID LEVEL SENSOR. COMPATIBLE WITH VP 792D |
vp-scientific |
|
VP 801 |
PTFE SANDWICH STEEPLE STIRRER, 5.6 MM WIDE, BY 15 MM TALL AND 1.58 MM THICK WITH TWO OPPOSING POCKETS 3.55 MM DIAMETER AND .069 MM DEEP |
vp-scientific |
|
VP 836A |
REGISTRATION FRAME SYSTEM FOR 1536 PIN REPLICATOR |
vp-scientific |
|
VP 838 |
REPLICATOR – 1536 PIN – 0.457mm DIAMETER – DELIVERS ~20nl |
vp-scientific |
|
VP 838FP1 |
1536 FLOATING TUBE PIN REPLICATOR – 0.457mm PIN DIAMETER, 17mm LONG, DELIVERS ~20nl |
vp-scientific |
|
VP 838FP3 |
1536 FLOATING TUBE PIN REPLICATOR – 0.787mm PIN DIAMETER, 17mm LONG – DELIVERS ~80nl |
vp-scientific |
|
VP 838FP4 |
FLOATING PIN REPLICATOR – 1536 PINS – 0.914mm DIAMETER, 17.4mm LONG, DELIVERS ~110nl |
vp-scientific |
|
VP 838FP8 |
FLOATING PIN REPLICATOR – 1536 PINS – 0.356mm DIAMETER, 17.4mm LONG, DELIVERS ~12nl |
vp-scientific |
|
VP 838FP9 |
1536 FLOATING TUBE PIN REPLICATOR – 0.229mm PIN DIAMETER, 17mm LONG – DELIVERS ~4nl |
vp-scientific |
|
VP 881 |
LIBRARY COPIER – FOR 1536 GREINER MICROPLATES |
vp-scientific |
|
VP 881A |
LIBRARY COPIER – FOR 1536 CORNING COSTAR MICROPLATES |
vp-scientific |
|
VP 882 |
LIBRARY COPIER – FOR GLASS PLATES AND NYLON MEMBRANES |
vp-scientific |
|
VP 903R-1536 |
PIN TOOL, PIPET TIP, AND MANIFOLD REGISTRATION TARGET PLATE FOR 1536 WELL MICROPLATES |
vp-scientific |
|
VP 903R-384 |
PIN TOOL, PIPET TIP, AND MANIFOLD REGISTRATION TARGET PLATE FOR 384 WELL MICROPLATES |
vp-scientific |
|
VP 903R-96 |
PIN TOOL, PIPET TIP, AND MANIFOLD REGISTRATION TARGET PLATE FOR 96 WELL MICROPLATES |
vp-scientific |
|
VP 904 |
PIN TOOL DRYER, 110 VOLTS AC. PIN TOOL ACTIVATING SWITCH AND VP 581B LOCATING FEATURE. |
vp-scientific |
|
VP 904-1 |
Pin Tool Dryer, 110 volts AC, Pin Tool activating switch, VP 581B locating feature with attachment holes 5mm off center |
vp-scientific |
|
VP 920 |
TWISTER I PLATE HANDLER/STACKER (USED SYSTEM) 3 AXIS ROBOT WITH GRIPPER AND TWO 20 PLATE STACKERS |
vp-scientific |
|
VP 920A |
EXTENDED CAPACITY STACKERS FOR TWISTER I, (USED SYSTEM) THREE 20 PLATE STACKERS |
vp-scientific |
|
VP OK10 |
VICKI REGISTRATION STARTER KIT |
vp-scientific |
|
VP OK11 |
FU-MEEI REGISTRATION STARTER KIT |
vp-scientific |
|
VP OK12 |
MEMBRANE MACROARRAY STARTER KIT FOR 96 WELL MICROPLATES |
vp-scientific |
|
VP OK13 |
MEMBRANE MACROARRAY STARTER KIT FOR 384 WELL MICROPLATES |
vp-scientific |
|
VP OK14 |
BASIC MEMBRANE MACROARRAY STARTER KIT FOR FIXED PIN & E-CLIP REPLICATORS |
vp-scientific |
|
VP OK14A |
BASIC MEMBRANE MACROARRAY STARTER KIT FOR FP SERIES REPLICATORS |
vp-scientific |
|
VP OK15 |
ROBOT DUAL COMBINATION WASH AND BLOT KIT FOR 96 PIN TOOLS |
vp-scientific |
|
VP OK15PE |
PERKIN ELMER ROBOT DUAL COMBINATION WASH AND BLOT KIT FOR 96 PIN TOOLS |
vp-scientific |
|
VP OK16 |
ROBOT DUAL COMBINATION WASH AND BLOT KIT FOR 384 PIN TOOLS |
vp-scientific |
|
VP OK16PE |
PERKIN ELMER ROBOT DUAL COMBINATION WASH AND BLOT KIT FOR 384 PIN TOOLS |
vp-scientific |
|
VP OK17 |
STANDARD ROBOT PIN TOOL ACCESSORY KIT |
vp-scientific |
|
VP OK18 |
ROBOT HOT SWAPABLE PIN TOOL ACCESSORY KIT |
vp-scientific |
|
VP OK19 |
ROBOT LOW PROFILE PIN TOOL ACCESSORY KIT |
vp-scientific |
|
VP OK20 |
PERKIN ELMER ROBOT PIN TOOL ACCESSORY KIT |
vp-scientific |
|
VP OK21 |
SPA STIRRING SYSTEM FOR 96 PIPETTOR |
vp-scientific |
|
VP OK22 |
SPA STIRRING SYSTEM FOR 96 PIPETTOR, CE VERSION |
vp-scientific |
|
VP OK7 |
REPLICATOR STARTER KIT |
vp-scientific |
|
VP OK8 |
SEAL & FREEZE STARTER KIT |
vp-scientific |
|
VP OK9 |
DEEP WELL REPLICATOR STARTER KIT |
vp-scientific |
|
VP OK9A |
GROOVED DEEP WELL REPLICATOR STARTER KIT |
vp-scientific |
上海金畔生物科技有限公司是实验试剂一站式采购服务商
1：强大的进口辐射能力，血清、抗体、耗材、大部分限制进口品等。
2：产品种类齐全，经营超过700多个品牌，基本涵盖所有生物实验试剂耗材。
3：提供加急服务，货品一般1-2周到货。
4：富有竞争力的价格优势，绝大部分价格有优势。
5：多年积累良好的信誉，大部分客户提供货到付款服务。客户包括清华、北大、交大、复旦、中山等100多所高校，ROCHE，阿斯利康、国药、fisher等药企。
6：我们还是Santa,Advanced Biotechnologies Inc,Athens Research & Technology,bangs,BBInternational,crystalchem,dianova,FD Neurotechnologies,Inc. FormuMax Scientific,Inc, Genebridege, Glycotope Biotechnology GmbH; iduron,Innovative Research of America, Ludger, neuroprobe,omicronbio, Polysciences,prospecbi, QA-BIO,quickzyme,RESEARCH DIETS,INC,sterlitech；sysy,TriLink BioTechnologies,Inc；worthington-biochem,zyagen等几十家国外公司代理。
7：我们还是invitrogen,qiagen,MiraiBioam,sigma;neb,roche,merck, rnd,BD, GE,pierce,BioLegend等*批发，欢迎合作。