| 货号 |
品名 |
规格 |
| CF5010 |
Connector Conical 4.2-8mm / 4.2-8mm |
Each |
| CF5011 |
Connector Conical 6.5mm / 6.5mm |
Each |
| CF5012 |
Connector Conical 10.5-16mm / 6.5-12mm |
Each |
| CF5013 |
Connector Conical 10.5-16mm / 3-7.5mm |
Each |
| CF5014 |
Connector Conical 4-8mm / 8-12mm |
Each |
| CF5015 |
Connector Conical 11-15mm / 7-12mm |
Each |
| CF5016 |
Straight Barbed Connector for 3-4mm ID Tubing |
Each |
| CF5017 |
Straight Barbed Connector for 5-6mm ID Tubing |
Each |
| CF5018 |
Straight Barbed Connector for 6-9mm ID Tubing |
Each |
| CF5019 |
Straight Barbed Connector for 9-11mm ID Tubing |
Each |
| CF5020 |
Angled Barbed Connector for 6-9mm ID Tubing |
Each |
| CF5021 |
Angled Barbed Connector for 9-11mm ID Tubing |
Each |
| CF5022 |
Triple Collector with 3 Barbed Adapters |
Each |
| CF5025 |
Double Collector with 2 Barbed Adapters |
Each |
| CF5922 |
Triple Collector with Adapters for 9-11mm ID Tubing |
Each |
| CY0003 |
Y-Connector for 3mm ID Tubing |
Each |
| CY0005 |
Y-Connector for 5mm ID Tubing |
Each |
| CY0007 |
Y-Connector for 7mm ID Tubing |
Each |
| CY0009 |
Y-Connector for 9mm ID Tubing |
Each |
| CY0011 |
Y-Connector for 11mm ID Tubing |
Each |
| 59249 |
One-Piece Fitting for 1/16″ Tubing |
Each |
| 59349 |
One-Piece Fitting for 1/8″ Tubing |
Each |
| CF5023 |
Double Barbed Fitting for 5 to 6mm ID Tubing |
Each |
| CF5024 |
Double Barbed Fitting for 6 to 9mm ID Tubing |
Each |
| 59556 |
Plug for 3/16″ OD Tubing, 5/16-24 Flat Bottom, PEEK |
Each |
| CF1400 |
Plug for Canary-Safe Cap 1/4″ Tubing Port |
Each |
| CF5007 |
Plugs for Canary-Safe Cap Standard Ports |
10 |
| CF5008 |
Plug for Charcoal Filter Port |
Each |
| CF5009 |
Plugs for 6.4mm ID (Leak) Ports |
5 |
| CF5112 |
Plug, 1/2″ NPT Pipe Size |
Each |
| CF5114 |
Plug, 1/4″ NPT Pipe Size |
Each |
| CJR01 |
PTFE Adapter for Gray PEEK Ports on JustRite® Waste Cans, for 1/8″ Tubing |
Each |
| CJR02 |
Long Adapter for Stainless Steel Port on JustRite® Waste Can, for 1/8″ Tubing |
Each |
| CJR03 |
PTFE Adapter for Gray PEEK Ports on JustRite® Waste Cans, for 3/16″ Tubing |
Each |
| CJR04 |
Long Adapter for Stainless Steel Port on JustRite® Waste Can, for 3/16″ Tubing |
Each |
| CJX01 |
Long Adapter for JustRite® Waste Container – connects Charcoal Filter to SS Fitting |
Each |
| CJX02 |
Short Adapter for JustRite® Waste Container – connects Charcoal Filter to Gray PEEK Fitting |
Each |
| CA1045 |
Thread Adapter, Converts Butress L-10 to GL45 Cap |
Each |
| CA2932 |
Adapter for Ground Neck Bottle |
Each |
| CA4501 |
Thread Adapter PTFE GL45 Cap – GL40 Bottle |
Each |
| CA4502 |
Thread Adapter PP GL45 Cap – GL40 Bottle |
Each |
| CA4503 |
Thread Adapter PTFE GL45 Cap – GL32 Bottle |
Each |
| CA4504 |
Thread Adapter PP GL45 Cap – GL32 Bottle |
Each |
| CA4506 |
Thread Adapter PP GL45 Cap to GL38 Bottle |
Each |
| CA4507 |
Thread Adapter PP S55 Bottle – GL45 Cap |
Each |
| CA4508 |
Thread Adapter PP S60 Bottle – GL45 Cap |
Each |
| CA4521 |
Thread Adapter, Male/Male, for Barrel Thread 2″ to GL45 Cap |
Each |
| CA4567 |
Thread Adapter PP US67 Bottle to GL45 Cap |
Each |
| CA4599 |
Thread Adapter PTFE GL45 Cap to Nalgene Single Thread Bottle |
Each |
| CF1827 |
Adapter – Converts 1/8-27 NPT Port to Accommodate 3/16″ OD Tubing |
Each |
| CF5006 |
Adapter – Converts Exhaust Filter Port to Air Check Valve Port |
Each |
| 294228 |
Blue PP Pour Rings for GL45 Bottles |
10 |
| 805365 |
Duran 250mL GL45 Lab Glass Bottle, Plastic Coated, w/ Stock Screw Cap & Pour Ring |
Each |
| 805545 |
Duran 1 Liter GL45 Lab Glass Bottle, Plastic Coated, w/ Stock Screw Cap & Pour Ring |
Each |
| 805635 |
Duran 2 Liter GL45 Lab Glass Bottle, Plastic Coated, w/ Stock Screw Cap & Pour Ring |
Each |
| 806543 |
Duran Amber 1000mL (1L) GL45 Lab Glass Bottle, Plastic Coated, NO CAP |
Each |
| CL12160 |
JustRite® Quick Disconnect Disposal Safety Can with PP Fittings for 3/8″ Tubing, 1 gallon |
Each |
| CLPP12752 |
JustRite® Quick Disconnect Disposal Safety Can with PP Fittings for 3/8″ Tubing, 2 gallon |
Each |
| CLPP12755 |
JustRite® Quick Disconnect Disposal Safety Can with PP Fittings for 3/8″ Tubing, 5 gallon |
Each |
| CLTF12752 |
JustRite® Quick Disconnect Disposal Safety Can with SS Fittings for 3/8″ Tubing, 2 gallon |
Each |
| CLTF12755 |
JustRite® Quick Disconnect Disposal Safety Can with SS Fittings for 3/8″ Tubing, 5 gallon |
Each |
| CL45002 |
2 Liter Waste Container for GL45 Caps |
Each |
| CL53005 |
5 Liter Waste Container for B-53 and S-55 Waste Caps |
Each |
| CL53010 |
10 Liter Waste Container for B-53 and S-55 Waste Caps |
Each |
| CL53020 |
20 Liter Waste Container for B-53 and S-55 Waste Caps |
Each |
| CL60020 |
20 Liter Waste Container for S60 Waste Caps |
Each |
| CL60030 |
30 Liter Waste Container for S60 Waste Caps |
Each |
| CCP0014 |
Prep Mobile Phase Safety Cap with One Port for 1/4″ OD Tubing |
Each |
| CCP1418 |
Prep Mobile Phase Safety Cap with One Port for 1/8″ OD Tubing, One Port for 1/4″ OD Tubing |
Each |
| CX0002 |
Canary-Safe Air Check Valve, Prep Size |
Each |
| CA4522 |
Adapter – Converts One GL45 Port into 2 GL45 Ports |
Each |
| CC1001 |
Canary-Safe Cap I, GL45, 1 Standard Tubing Port |
Each |
| CC1002 |
Canary-Safe Cap 2, GL45, 2 Standard Tubing Ports |
Each |
| CC1003 |
Canary-Safe Cap 3, GL45, 3 Standard Tubing Ports |
Each |
| CC1004 |
Canary-Safe Cap 4, GL45, 4 Standard Tubing Ports |
Each |
| CC1005 |
Canary-Safe Cap 5, GL45, 5 Standard Tubing Ports |
Each |
| CC1006 |
Canary-Safe Cap 6, GL45, 6 Standard Tubing Ports |
Each |
| CC1011 |
Canary-Safe Cap I, GL45, 1 Standard Tubing Port with Shut-Off Valve |
Each |
| CC1012 |
Canary-Safe Cap 2, GL45, 2 Standard Tubing Ports with Shut-Off Valves |
Each |
| CC1013 |
Canary-Safe Cap 3, GL45, 3 Standard Tubing Ports with Shut-Off Valves |
Each |
| CC1014 |
Canary-Safe Cap 4, GL45, 4 Standard Tubing Ports with Shut-Off Valves |
Each |
| CC1114 |
Canary-Safe GL45 Mobile Phase Cap, 1 Port for 1/4″ Tubing Includes Fittings |
Each |
| CC1418 |
Canary-Safe GL45 Mobile Phase Cap with 1 Standard Port, and 1 Port for 1/4″ Tubing |
Each |
| CC2114 |
Canary-Safe Cap, GL45, with 2 Ports for 1/4″ Tubing |
Each |
| CC4316 |
Canary-Safe Cap, GL45, with 4 Ports for 3/16″ Tubing |
Each |
| CC5508 |
Canary-Safe Cap, S55, with 8 Ports for Standard Tubing |
Each |
| CC83114 |
Canary-Safe B83 Mobile Phase Cap, 1 Port for 1/4″ Tubing |
Each |
| CX0001 |
Replacement Canary-Safe Air Check Valve |
Each |
| CC1001B |
Canary-Safe Cap I, GL45, 1 Standard Tubing Port |
Each |
| CC1001G |
Canary-Safe Cap I, GL45, 1 Standard Tubing Port |
Each |
| CC1001M |
Canary-Safe Cap I, GL45, 1 Standard Tubing Port |
Each |
| CC1001R |
Canary-Safe Cap I, GL45, 1 Standard Tubing Port |
Each |
| CC1002B |
Canary-Safe Cap 2, GL45, 2 Standard Tubing Ports |
Each |
| CC1002G |
Canary-Safe Cap 2, GL45, 2 Standard Tubing Ports |
Each |
| CC1002M |
Canary-Safe Cap 2, GL45, 2 Standard Tubing Ports |
Each |
| CC1002R |
Canary-Safe Cap 2, GL45, 2 Standard Tubing Ports |
Each |
| MW0010 |
Multi-Inlet Waste Manifold with 10 Standard Tubing Ports |
Each |
| MW0406 |
Multi-Inlet Waste Manifold with 4 Standard Tubing Ports, 6 Ports for Barbed Adapter |
Each |
| MW0523 |
Multi-Inlet Waste Manifold with 5 Standard Tubing Ports, 2 Ports for 3/16″ OD Tubing, 3 Ports for Barbed Adapters |
Each |
| MW0802 |
Multi-Inlet Waste Manifold with 8 Standard Tubing Ports, 2 Ports for Barbed Adapter |
Each |
| MW1010 |
Multi-Inlet Waste Manifold with 10 Ports for Barbed Adapters |
Each |
| CW53218 |
Canary-Safe Waste Cap, B53, with 2 Standard Tubing Ports & 1 Port for Barbed Adapter |
Each |
| CW53219 |
Canary-Safe Waste Cap, B53, with 2 Standard Tubing Ports |
Each |
| CW53418 |
Canary-Safe Waste Cap, B53, with 4 Standard Tubing Ports & 1 Port for Barbed Adapter |
Each |
| CW83001 |
Canary-Safe Waste Cap, B83, with 1 Port for Barbed Adapter |
Each |
| CW83004 |
Canary-Safe Waste Cap, B83, with 4 Ports for Barbed Adapters |
Each |
| CW83418 |
Canary-Safe Waste Cap, B83, with 4 Standard Tubing Ports & 1 Port for Barbed Adapter |
Each |
| CW83419 |
Canary-Safe Waste Cap, B83, with 4 Standard Tubing Ports |
Each |
| CW45002 |
Canary-Safe Waste Cap, GL45, with 2 Ports for Barbed Adapter |
Each |
| CW45018 |
Canary-Safe Waste Cap, GL45, with 1 Standard Tubing Port |
Each |
| CW45118 |
Canary-Safe Waste Cap, GL45, with 1 Standard Tubing Port & 1 Port for Barbed Adapter |
Each |
| CW45218 |
Canary-Safe Waste Cap, GL45, with 2 Standard Tubing Ports & 1 Port for Barbed Adapter |
Each |
| CW45313 |
Canary-Safe Waste Cap, GL45, with 3 Standard Tubing Ports ONLY |
Each |
| CW45319 |
Canary-Safe Waste Cap, GL45, with 3 Standard Tubing Ports |
Each |
| CW45418 |
Canary-Safe Waste Cap, GL45, 4 Standard Ports, 1 Port for Barbed Adapter |
Each |
| CW55218 |
Canary-Safe Waste Cap, S55, with 2 Standard Tubing Ports & 1 Port for Barbed Adapter |
Each |
| CW60001 |
Canary-Safe Waste Cap, S60, with 1 Port for Barbed Adapter |
Each |
| CW60218 |
Canary-Safe Waste Cap, S60, with 2 Standard Tubing Ports & 1 Port for Barbed Adapter |
Each |
| CW60302 |
Canary-Safe Waste Cap, S60/61, with 3 Standard Tubing Ports & 2 Ports for Barbed Adapters |
Each |
| CW60319 |
Canary-Safe Waste Cap, S60/61, with 3 Standard Tubing Ports |
Each |
| CW90418 |
Canary-Safe Waste Cap, S90, with 4 Standard Tubing Ports & 1 Port for Barbed Adapter |
Each |
| CF5001 |
Extension for Canary-Safe Exhaust Filter |
Each |
| CF5002 |
Angled Adapter for Canary-Safe Exhaust Filter |
Each |
| CF5003 |
Lateral Off-Set Adapter for Canary-Safe Exhaust Filter |
Each |
| CFX1428 |
Custom Adapter for Canary-Safe Exhaust Filter |
Each |
| CX12000 |
12 Month Canary-Safe Exhaust Filter |
Each |
| CX3000 |
3 Month Canary-Safe Exhaust Filter |
Each |
| CX6000 |
6 Month Canary-Safe Exhaust Filter |
Each |
| CX6010 |
Exhaust Filter with Sulfuric Acid for Volatile bases |
Each |
| CX6020 |
Exhaust Filter with Potassium Hydroxide for Volatile Acids |
Each |
| CSF5155 |
Canary-Safe Waste Cap, S51/55, with Safety Funnel & 2 Standard Tubing Ports |
Each |
| CSF5318 |
Canary-Safe Waste Cap, B53, with Safety Funnel, 1 Standard Port & 1 Port for Barbed Adapter |
Each |
| CSF6061 |
Canary-Safe Waste Cap, S60/61, with Safety Funnel & 2 Standard Tubing Ports |
Each |
| CSF83418 |
Canary-Safe Waste Cap, B83, with Safety Funnel with Shut-Off Valve & 4 Standard Ports |
Each |
| CSFE10 |
Canary-Safe Cap and Safety Funnel with Grounding Cable |
Each |
| Sentinel |
Sentinel Level Indicator |
Each |
| 38402 |
Adhesive Sealing Film, 384 Square Well Pattern, Ultra Thin, Teflon® |
Square |
| 96104 |
Pattern Adhesive Resealable Silicone Sealing Film, 96-Well |
Round |
| 96823 |
Adhesive Sealing Film, Teflon®, Round Welll, Black |
Round |
| 96893 |
Adhesive Sealing Film, Teflon®, Round Well, White |
Round |
| 961201 |
Adhesive Sealing Film, Teflon®, Square Well |
Square |
| 961202 |
Adhesive Sealing Film, Teflon®, Square Well, Scored |
Square |
| 961801 |
Adhesive Sealing Film, Teflon®, Round Well |
Round |
| 961802 |
Adhesive Sealing Film, Teflon®, Round Well, Scored |
Round |
| 38402SL |
Pre-slit Adhesive Sealing Film, 384 Square Well Pattern, Ultra Thin, Teflon® |
Square |
| 99970 |
48-Position Silicone/PTFE Vial Cap Mat, Blue |
Round Plug |
| 99975 |
48-Position Silicone/PTFE Vial Cap Mat, Clear, Pre-slit |
Round Plug |
| 48010CM |
48 Position Santoprene Cap Mat |
Rectangle |
| 96017 |
Polyethylene Cap Mat |
Round |
| 96057 |
Autosampler Compatible 1mL Cap Mat with “X” |
Round |
| 96230 |
Rubber Cap Mat for Round Well Collection Plates |
Round |
| 96235 |
Pre-Slit Rubber Cap Mat for Round Well Collection Plates |
Round |
| 99685 |
Silicone/PTFE Cap Mat for 1mL TrueTaper® Plate and 1mL Tapered Vials |
Round |
| 99690 |
Pre-Slit Silicone/PTFE Cap Mat for 1mL TrueTaper® Plate and 1mL Tapered Vials |
Round |
| 99890 |
Blue Pre-Slit Silicone/PTFE Cap Mat for 1mL TrueTaper® Plate and 1mL Tapered Vials |
Round |
| 955011 |
Wide Mouth Round, Shallow Plug Cap Mat |
Round |
| 955022 |
Wide Mouth Round, Shallow Plug Cap Mat, Pre-Slit |
Round |
| 960181 |
Purple Silicone Cap Mat for 1mL TrueTaper® Plates |
Round |
| 960185 |
Pre-Slit Purple Silicone/PTFE Cap Mat for 1mL TrueTaper® Plates |
Round |
| 962611 |
Round Silicone/PTFE Cap Mat – for Low Profile Plates |
Round |
| 962615 |
Round Silicone/PTFE Cap Mat, Pre-Slit – for Low Profile Plates |
Round |
| 963670 |
Pre-Scored Round Well Cap Mats with Molded Silicone/PTFE Liner |
Round |
| 963675 |
Round Well Cap Mats with Molded Silicone/PTFE Liner |
Round |
| 964007 |
Clear Ultra Thin Round Well Cap Mat |
Round |
| 964075 |
Clear Pre-Slit Ultra Thin Round Well Cap Mat |
Round |
| 965007 |
Purple Ultra Thin Round Silicone Cap Mat |
Round |
| 965075 |
Purple Pre-Scored Ultra Thin Round Cap Mat |
Round |
| 966011 |
Round Wide Mouth Silicone/PTFE Cap Mat |
Round |
| 966022 |
Round Wide Mouth Silicone/PTFE Cap Mat, Pre-Slit |
Round |
| 967701 |
Light Blue Pre-Slit 96 Round Well Cap Mat |
Round |
| 967702 |
Light Blue 96-Well Round Cap Mat |
Round |
| 96128-2 |
Plug Caps – Strips of 8 |
Round |
| 96FPSO |
Pre-Slit PTFE/Silicone Cap Mat |
Round |
| 96FSS0 |
Resealable Silicone/PTFE Coated Cap Mat |
Round |
| 2726 |
2mL Pierceable Cap Mat with “X” on Surface |
Square |
| 3726 |
2mL Square 96-Well Low Temperature (-80) Cap Mat for Long Term Storage |
Square |
| 29660 |
Resealable PFTE/Silicone Square 96-Well Cap Mat |
Square |
| 29665 |
Resealable Pre-Scored PTFE/Silicone Square Well Cap Mat |
Square |
| 963724 |
Pre-Slit Square Well Cap Mat with Molded Silicone/PTFE Liner |
Square |
| 963725 |
Square Well Cap Mat with Molded Silicone/PTFE Liner |
Square |
| 964008 |
Clear Ultra Thin Square Cap Mat |
Square |
| 964085 |
Clear Ultra Thin Pre-Slit Square Cap Mat |
Square |
| 965008 |
Mighty Mat Purple Ultra Thin Square Cap Mat |
Square |
| 965085 |
Purple Ultra Thin Pre-Slit Square Cap Mat |
Square |
| 968801 |
Light Blue Pre-Slit 96-Well Square Cap Mat |
Square |
| 968802 |
Light Blue 96 Square Well Cap Mat |
Square |
| 96400 |
4″ Rubber Roller |
Each |
| 38435 |
58µL, 384-Well Collection Plate, Square Well / Spherical Bottom |
Square/Round |
| 96384 |
384 Well Soft Silicone Cap Mat, Clear |
Square |
| 384270 |
384 Well Storage Plate, 225µL |
Square |
| 38120GC |
120µL 384-Well Collection Plate with SiliGuard™ Low Bind Coating |
Square |
| 38465B |
384-Well Collection Plate, 65µL, Round Openings, Black |
Round/Flat |
| 38465C |
384 Well Plates, 65µL, Round Opening, Clear |
Round/Flat |
| 96384SL |
384-Well Cap Mat, Clear, Pre-Scored |
Square |
| 38465W |
384 Well Plates, 65µL, Round Opening, White |
Round/Flat |
| 96065 |
650µL 96-Well Half-Height Collection Plate with V-Shaped Well Bottoms |
Round/V |
| 96340 |
340µL 96-Well Collection Plate with V-Shaped Well Bottoms |
Round/V |
| 96355 |
355µL 96-Well Collection Plate with U-Shaped Well Bottoms |
Round/U |
| 96390 |
390µL 96-Well Collection Plate with Flat Bottom Wells |
Round/Flat |
| 960101 |
1mL Half-Height 96-Well Collection Plate with Shallow V-Bottom Wells |
Round |
| 17P687 |
1mL 96-Well Collection Plate with Round Well Bottoms |
Round/Round |
| 17P687GC |
1mL 96-Well Collection Plate with Round Well Bottoms, with SiliGuard™ Low Bind Coating |
Round/Round |
| 17P687Z |
1mL 96-Well Collection Plate with Round Well Bottoms |
Round/Round |
| 17P687ZGC |
1mL 96-Well Collection Plate with Round Well Bottoms, with SiliGuard™ Low Bind Coating |
Round/Round |
| 96065GC |
650µL 96-Well Half-Height Collection Plate with V-Shaped Well Bottoms, with SiliGuard™ Low Bind Coating |
Round/V |
| 96340GC |
340µL 96-Well Collection Plate with V-Shaped Well Bottoms, with SiliGuard™ Low Bind Coating |
Round/V |
| 96355GC |
355µL 96-Well Collection Plate with U-Shaped Bottom Wells, with SiliGuard™ Low Bind Coating |
Round/U |
| 96390GC |
390µL 96-Well Collection Plate with Flat Bottom Wells, with SiliGuard™ Low Bind Coating |
Round/Flat |
| 968810GC |
1mL TrueTaper® 96-Well Collection Plate with 50uL Tapered-Bottom Wells, with SiliGuard™ Low Bind Coating |
Round Top/Tapered Bottom |
| 96ST10 |
1mL 96-Well Collection Plate with Short V-Bottom Wells |
Square/V |
| 96T001 |
Alpha-Numeric Template |
Round Holes |
| 96T002 |
Numeric Template |
Round Holes |
| 968810 |
1ml TrueTaper® 96-Well Collection Plate with 50uL Tapered-Bottom Wells |
Round Top/Tapered Bottom |
| 967720 |
2mL 96-Well Collection Plate with Round-Bottom Wells |
Round/Round |
| 968820 |
2mL TrueTaper® 96-Well Collection Plate with 100uL Tapered-Bottom Wells |
Square Top/Tapered Bottom |
| 27P557GC |
2mL Clear-Vu™ 96-Well Collection Plate with Round-Bottom Wells, with SiliGuard™ Low Bind Coating |
Square/Round |
| 27P687 |
2mL 96-Well Collection Plate with Round-Bottom Wells |
Square/Round |
| 27P687GC |
2mL 96-Well Collection Plate with Round-Bottom Wells, with SiliGuard™ Low Bind Coating |
Square/Round |
| 59623-23 |
2mL 96-Well Collection Plate with V-Bottom Wells |
Square/V |
| 59623-23BK |
2mL 96-Well Collection Plate, Square Top / Tapered V Bottom, Black |
Square/V |
| 59623-23GC |
2mL 96-Well Collection Plate with V-Bottom Wells, with SiliGuard™ Low Bind Coating |
Square/V |
| 967720GC |
2mL 96-Well Collection Plate with Round-Bottom Wells, with SiliGuard™ Low Bind Coating |
Round/Round |
| 968820GC |
2mL TrueTaper® 96-Well Collection Plate with 100uL Tapered-Bottom Wells, with SiliGuard™ Low Bind Coating |
Square Top/Tapered Bottom |
| 968820BL |
2mL TrueTaper® 96-Well Collection Plate with 100uL Tapered-Bottom Wells, Black |
Square Top/Tapered Bottom |
| 96305 |
0.7mL Clear Glass Tapered, Flat-Bottom Inserts |
100 |
| 96326 |
0.7mL Flat Bottom Tapered Glass Inserts in 96-Well Plate with Pierceable “X” Cap Mat |
Each |
| 96380 |
0.7mL Flat Bottom Tapered Glass Inserts in 96-Well Plate with Pre-Slit Silicone Cap Mat |
Each |
| 96382 |
0.7mL Flat Bottom Tapered Glass Inserts in 96-Well Sample Prep Plate |
Each |
| 96385 |
0.7mL Flat Bottom Glass Inserts in 96-Well Plate with Clear Ultra Thin Cap Mat |
Each |
| 96405 |
1mL Clear Glass Tapered, Flat-Bottom Inserts |
100 |
| 96481 |
1mL Flat Bottom Tapered Glass Inserts in 96-Well Plate |
Each |
| 96485 |
1mL Flat-Bottom Tapered Glass Inserts in 96-Well Plate with 99685 Silicone Cap Mat |
Each |
| 96489 |
1mL Flat Bottom Tapered Glass Inserts in 96-Well Plate with Blue Pre-Slit Silicone Cap Mat |
Each |
| 96490 |
1mL Flat-Bottom Tapered Glass Inserts in 96-Well Plate with 99690 Silicone Pre-Slit Cap Mat |
Each |
| 96627 |
0.7mL Tapered Glass Inserts in 96-Well Plate with Pierceable Cap Mat |
Each |
| 96681 |
1mL Tapered Glass Inserts in 96-Well Plate |
Each |
| 96685 |
0.7mL Tapered Glass Inserts in 96-Well Plate with Purple Ultra Thin, Pre-Slit Cap Mat |
Each |
| 96687 |
0.7mL Tapered Glass Inserts in 96-Well Sample Prep Plate |
Each |
| 96837 |
0.7mL Clear Glass Tapered, Round-Bottom Insert |
100 |
| 96847 |
1mL Clear Glass Tapered, Round-Bottom Inserts |
100 |
| 99861 |
1mL Tapered Glass Inserts in 96-Well Plate with Clear Silicone Cap Mat |
Each |
| 99862 |
1mL Tapered Glass Inserts in 96-Well Plate with Pre-Slit Clear Silicone Cap Mat |
Each |
| 961879 |
1mL Low Carry Tapered Glass Inserts in 96-Well Plate with Blue Pre-Slit Cap Mat |
Each |
| 96305S |
0.7mL Clear Glass Flat Bottom Tapered Inserts – Silanized |
100 |
| 96326S |
0.7mL Flat Bottom Tapered SILANIZED Glass Inserts in 96-Well Plate with Pierceable “X” Cap Mat |
Each |
| 96405S |
1mL Clear Glass Flat Bottom Tapered Inserts – Silanized |
100 |
| 96627S |
0.7mL SILANIZED Tapered Glass Inserts in 96-Well Plate with Pierceable Cap Mat |
Each |
| 96681S |
1mL SILANIZED Tapered Glass Inserts in 96-Well Plate |
Each |
| 96687S |
0.7mL SILANIZED Tapered Glass Inserts in 96-Well Sample Prep Plate |
Each |
| 96837S |
0.7mL Clear Glass Tapered Inserts – Silanized |
96 |
| 96847S |
1mL Clear Glass Tapered Inserts – Silanized |
100 |
| 99862S |
1mL SILANIZED Tapered Glass Inserts in 96-Well Plate with Pre-Slit Clear Silicone Cap Mat |
Each |
| 96120 |
1.2mL Tubes |
4800 |
| 96475 |
Aluminum Dry Heat Block for Marsh Tubes |
Round |
| 96520 |
2.1mL Square PP Tubes Only for part # 96550-00 |
4800 |
| 96521 |
2.1mL Square Low Surface Tension Polypropylene Tubes Only for part # 96550-00 |
4800 |
| 96572 |
Aluminum Dry Heat Block |
Round |
| 96840 |
Clear Polypropylene Domed Cap Strips |
125 |
| 96845 |
Clear Polypropylene Dome Cap Strip |
125 |
| 96855 |
Pierceable Clear Polypropylene Flat Cap Strip 8 Caps/Strip |
125 |
| 96865 |
Plate with Removable 600µL Wells |
Round |
| 96888 |
Strip of 8 600µL Tubes for 96865 96-Well Plate |
Round |
| 96128-1 |
96-Well Storage Rack with 12 Strips of 8 Tubes |
Round |
| 96526-12 |
Mat Cover for #96550-00 12 Serrated Strips of 8 Caps |
Round |
| 96550-00 |
96-Well 2mL Storage Rack |
Square |
| 96727-8 |
6mm Pre-Slit Silicone/PTFE Plug Strips for 96-Well Collection Plates, PCR Plates & Inserts (8 plugs/strip) |
Round |
| 96812-1 |
96-Well Storage Rack with 8 Strips of 12 Tubes |
Round |
| 96812-2 |
Plug Caps – Strips of 12 |
Round |
| 96961-1 |
96-Well Storage Rack with 96 Plain Individual Tubes |
Round |
| 96962-2 |
Individual Plug Caps |
Round |
| 56410 |
ViewOne Lablite |
Each |
| 56411 |
ViewOne Indexer |
Each |
| LOI-101 |
Tilt Stand for LightOne and ViewOne Products |
Each |
| LOI-384 |
LightOne Pro 384 Well Illuminator |
Each |
| LOI-96FT |
LightOne Illuminator |
Each |
| LOR-96FT |
LightOne Illuminator RED |
Each |
| 96T051 |
Speedy-Bead 96-Well Bead Dropper |
Each |
| 96FS00-C |
Clear Spacer for 96-Well Flexi-Tier™ Block |
Round |
| 96FSC1 |
Pre-Scored PTFE/Silicone/PTFE Liner for 96-Well Flexi-Tier™ System |
Round |
| 96FB00 |
Opaque Base Plate for 96-Well Flexi-Tier™ Block |
Round |
| 96FB00-C |
Clear Base Plate for 96-Well Flexi-Tier™ Block |
Round |
| 96FC00 |
Opaque Cover for 96-Well Flexi-Tier™ Block |
Round |
| 96FC00-C |
Clear Cover for 96-Well Flexi-Tier™ Block |
Round |
| 96FS00 |
Opaque Spacer for 96-Well Flexi-Tier™ Block |
Round |
| 96FSC2 |
Molded PTFE/Silicone Liner |
Round |
| 96FSC2-12 |
Molded PTFE/Silicone 12 Position Strip Liner |
Round |
| 96FSC2PLUG |
Molded PTFE/Silicone Plug – Single Position |
Round |
| 96FSC2STRIP |
Molded PTFE/Silicone Strip – 8 Position |
Round |
| 96FSC3 |
Pre-Scored Molded PTFE/Silicone Liner |
Round |
| 96FSC3PLUG |
Pre-Scored Molded PTFE/Silicone B-Tech Single Plug |
Round |
| 96FSC3STRIP |
Pre-Scored Molded PTFE/Silicone B-Tech Strip 8 Position |
Round |
| 96FSC4 |
Molded Silicone Liner |
Round |
| 96FSC5 |
Pre-Scored Molded Silicone Liner |
Round |
| 96RB00 |
Opaque Round Base Plate for 96-Well Flexi-Tier™ Block |
Round |
| 96015 |
Stainless Steel Screw for 1.5mL Plate |
4 |
| 12349 |
12-Well Aluminum Block |
Round |
| 96010 |
Stainless Steel Screw for 1mL Plate |
4 |
| 96020 |
Stainless Steel Screw for 2.0mL Plate |
4 |
| 96050 |
Stainless Steel Screw for.5ml Plate |
4 |
| 96A001 |
Aluminum Base |
Round |
| 96A002 |
Custom Tall Aluminum 96-Well Base Plate for Flexi-Tier™ Vials |
Round |
| 96A105 |
0.5mL Aluminum Block System with Solid Base |
Round |
| 96A110 |
1.0mL Aluminum Block System with Solid Base |
Round |
| 96A115 |
1.5mL Aluminum Block System with Solid Base |
Round |
| 96A120 |
2.0mL Aluminum Block System with Solid Base |
Round |
| 96AB11 |
Aluminum Flexi-Tier™ Base Plate with Open Bottom |
Round |
| 96AB22 |
Aluminum Flexi-Tier™ Base Plate with Solid Bottom |
Round |
| 96AB74 |
Aluminum Open Round Bottom Flexi-Tier™ Base Plate |
Round |
| 96AB77 |
Aluminum Open Round Bottom Base Plate with Threaded Screw Holes |
Round |
| 96B002 |
Aluminum Cover |
Round |
| 96F105 |
0.5mL Aluminum Block System with Solid Base |
Round |
| 96F110 |
1.0mL Aluminum Block System with Solid Base |
Round |
| 96F115 |
1.5mL Aluminum Block System with Solid Base |
Round |
| 96F120 |
2.0mL Aluminum Block System with Solid Base |
Round |
| 96BB05-C |
0.5mL 96-Well Clear Flexi-Tier™ Block System |
Round |
| 96BB10-C |
1.0mL 96-Well Clear Flexi-Tier™ Block System |
Round |
| 96BB15-C |
1.5mL 96-Well Clear Flexi-Tier™ Block System |
Round |
| 96F220-C |
2.0mL 96-Well Clear Flexi-Tier™ Block System |
Round |
| 96F220-CS |
2.0mL 96-Well Clear Flexi-Tier™ Block System, Silanized |
Round |
| 96F220A-C |
2.0mL 96-Well Clear Flexi-Tier™ Block System with Amber Inserts |
Round |
| 96FP05-C |
0.5mL 96-Well Clear Flexi-Tier™ Block System |
Round |
| 96FP10-C |
1.0mL 96-Well Clear Flexi-Tier™ Block System |
Round |
| 96FP15-C |
1.5mL 96-Well Clear Flexi-Tier™ Block System |
Round |
| 96FP20-C |
2.0mL 96-Well Clear Flexi-Tier™ Block System |
Round |
| 96PV05-C |
0.5mL 96-Well Clear Flexi-Tier™ Block System |
Round |
| 96PV10-C |
1.0mL 96-Well Clear Flexi-Tier™ Block System |
Round |
| 96PV15-C |
1.5mL Clear 96-Well Flexi-Tier™ Block System |
Round |
| 96PV20-C |
2.0mL 96-Well Clear Flexi-Tier™ Block System |
Round |
| 96FV05 |
0.5mL Glass Conical Vials in Vial Loader |
Each |
| 96FV05A |
0.5mL Amber Glass Conical Vials in Vial Loader |
Each |
| 96FV10 |
1.0mL Glass Conical Vials in Vial Loader |
Each |
| 96FV10A |
1.0mL Amber Glass Conical Vials in Vial Loader |
Each |
| 96FV15 |
1.5mL Clear Conical Glass Inserts in Vial Loader |
Each |
| 96FV15A |
1.5mL Amber Glass Conical Inserts in Vial Loader |
Each |
| 96FV20 |
2.0mL Clear Glass Conical Vials in Vial Loader |
Each |
| 96FV20A |
2.0mL Amber Glass Conical Vials in Vial Loader |
Each |
| 96VL05 |
0.5mL Flat Bottom Clear Glass Inserts in Vial Loader |
96-Position |
| 96VL05A |
0.5mL Amber Flat Bottom Glass Inserts in Vial Loader |
96-Position |
| 96VL10 |
1.0mL Flat Bottom Clear Glass Inserts in Vial Loader |
96-Position |
| 96VL10A |
1.0mL Amber Flat Bottom Glass Inserts in Vial Loader |
96-Position |
| 96VL15 |
1.5mL Flat Bottom Clear Glass Inserts in Vial Loader |
96-Position |
| 96VL15A |
1.5mL Amber Flat Bottom Glass Inserts in Vial Loader |
96-Position |
| 96VL20 |
2.0mL Clear Glass Flat Bottom Vials in Vial Loader |
96-Position |
| 96VL20A |
2.0mL Amber Glass Flat Bottom Vials in Vial Loader |
96-Position |
| 96F005 |
0.5mL Clear Glass Conical Inserts |
96-Position |
| 96F005A |
0.5mL Amber Glass Conical Inserts |
96-Position |
| 96F010 |
1.0mL Clear Glass Conical Insert |
96-Position |
| 96F010A |
1.0mL Amber Glass Insert |
96-Position |
| 96F015 |
1.5mL Clear Glass Conical Insert |
96-Position |
| 96F015A |
1.5mL Amber Glass Conical Inserts |
96-Position |
| 96F020 |
2.0mL Conical Glass Inserts |
96-Position |
| 96F020A |
2.0mL Amber Conical Glass Inserts |
96-Position |
| 96F605 |
0.5mL Flat Bottom Clear Glass Inserts |
96-Position |
| 96F605A |
0.5mL Amber Flat Bottom Glass Inserts |
96-Position |
| 96F610 |
1.0mL Flat Bottom Clear Glass Inserts |
96-Position |
| 96F610A |
1.0mL Amber Flat Bottom Glass Inserts |
96-Position |
| 96F615 |
1.5mL Flat Bottom Clear Glass Inserts |
96-Position |
| 96F615A |
1.5mL Amber Flat Bottom Glass Inserts |
96-Position |
| 96F620 |
2.0mL Flat Bottom Clear Glass Inserts |
96-Position |
| 96F620A |
2.0mL Amber Flat Bottom Glass Inserts |
96-Position |
| 96F625 |
2.5mL Flat Bottom Clear Glass Inserts |
96-Position |
| 96BB05 |
0.5mL 96-Well Opaque Flexi-Tier™ Block System |
96-Position |
| 96BB10 |
1.0mL 96-Well Opaque Flexi-Tier™ Block System |
96-Position |
| 96BB15 |
1.5mL 96-Well Opaque Flexi-Tier™ Block System |
96-Position |
| 96F220 |
2.0mL 96-Well Opaque Flexi-Tier™ Block System |
96-Position |
| 96F220A |
2.0mL 96-Well Opaque Flexi-Tier™ Block System with Amber Inserts |
96-Position |
| 96FP05 |
0.5mL 96-Well Opaque Flexi-Tier™ Block System |
96-Position |
| 96FP10 |
1.0mL 96-Well Opaque Flexi-Tier™ Block System |
96-Position |
| 96FP15 |
1.5mL 96-Well Opaque Flexi-Tier™ Block System |
96-Position |
| 96FP20 |
2.0mL 96-Well Opaque Flexi-Tier™ Block System |
96-Position |
| 96PV05 |
0.5mL 96-Well Opaque Flexi-Tier™ Block System |
96-Position |
| 96PV10 |
1.0mL 96-Well Opaque Flexi-Tier™ Block System |
96-Position |
| 96PV15 |
1.5mL 96-Well Opaque Flexi-Tier™ Block System |
96-Position |
| 96PV20 |
2.0mL 96-Well Opaque Flexi-Tier™ Block System |
96-Position |
| 96PL05 |
0.5mL Polypropylene Conical Inserts in Vial Loader |
96-Position |
| 96PL10 |
1.0mL Polypropylene Conical Inserts in Vial Loader |
96-Position |
| 96PL15 |
1.5mL Polypropylene Conical Inserts in Vial Loader |
96-Position |
| 96PL20 |
2.0mL Polypropylene Conical Inserts in Vial Loader |
96-Position |
| 96FV05-S |
0.5mL Silanized Clear Glass Conical Vials in Vial Loader |
96-Position |
| 96FV10-S |
1.0mL Silanized Amber Glass Conical Vials in Vial Loader |
96-Position |
| 96FV15-S |
1.5mL Silanized Clear Glass Conical Vials in Vial Loader |
96-Position |
| 96FV20-S |
2.0mL Silanized Clear Glass Conical Vials in Vial Loader |
96-Position |
| 96FV20A-S |
2.0mL Silanized Amber Glass Conical Vials with Marking Spots in Vial Loader |
96-Position |
| 96VL05-S |
0.5mL Silanized Flat Bottom Clear Glass Inserts in Vial Loader |
96-Position |
| 96VL10-S |
1.0mL Silanized Flat Bottom Clear Glass Inserts in Vial Loader |
96-Position |
| 96VL15-S |
1.5mL Silanized Flat Bottom Clear Glass Inserts in Vial Loader |
96-Position |
| 96VL20-S |
2.0mL Silanized Flat Bottom Clear Glass Inserts in Vial Loader |
96-Position |
| 96VL20A-S |
2.0mL Silanized Amber Glass Flat Bottom Vials in Vial Loader |
96-Position |
| 10178 |
Select-A-Vial™, 1.0mL Inserts in Racks Only |
96-Position |
| 10196 |
Select-A-Vial™ 1mL Clear Conical Glass Inserts |
96-Position |
| 20096 |
Select-A-Vial™ Base Trays |
96-Position |
| 27001 |
Select-A-Vial™, 1.0mL Complete System |
96-Position |
| 27350 |
Select-A-Vial™, 350µL Complete System |
96-Position |
| 27500 |
Select-A-Vial™, 500µL Complete System |
96-Position |
| 35070 |
Clear Cap Mats for 350µL Select-A-Vial™ |
96-Position |
| 35075 |
Clear Pre-Slit Cap Mats for 350µL Select-A-Vial™ |
96-Position |
| 35078 |
Select-A-Vial™, 350µL Inserts in Racks Only |
96-Position |
| 35096 |
Select-A-Vial™ 350µL Clear Conical Glass Inserts |
100 |
| 50078 |
Select-A-Vial™, 500µL Inserts in Racks Only |
96-Position |
| 50096 |
500µL Glass Inserts |
100 |
| 10178S |
Select-A-Vial™, 1.0mL Silanized Inserts in Racks Only |
96-Position |
| 10196S |
1.0mL Silanized Glass Inserts |
100 |
| 27001S |
Select-A-Vial™, 1.0mL Silanized Complete System |
96-Position |
| 27350S |
Select-A-Vial™, 350µL Silanized Complete System |
96-Position |
| 27500S |
Select-A-Vial™, 500µL Silanized Complete System |
96-Position |
| 35078S |
Select-A-Vial™, 350µL Silanized Inserts in Racks Only |
96-Position |
| 35096S |
Select-A-Vial™, Silanized 350µL Clear Conical Glass Inserts |
96-Position |
| 50078S |
Select-A-Vial™, 500µL Silanized Inserts in Racks Only |
96-Position |
| 50096S |
500µL Silanized Glass Inserts |
100 |
| 96100 |
Clear 100µL Skirted Low Profile Plate |
96-Well |
| 96323 |
White 100µL Skirted Low Profile PCR Plate |
96-Well |
| 96726 |
6mm Silicone/PTFE Cap Mat |
96-Well |
| 96727 |
6mm Pre-Slit Silicone/PTFE Cap Mat |
96-Well |
| 964012 |
Clear Polypropylene Films for PCR |
100 |
| 968120 |
Aluminum 1.5 mil Pierceable Foil Film for PCR |
100 |
| 969610 |
Clear 200µL PCR Plate |
96-Well |
| 969620 |
Clear 250µL PCR Plate |
96-Well |
| 96-9601 |
Clear 200µL Raised Rim PCR Plate |
96-Well |
| 96-9619 |
Clear 100µL Low Profile PCR Plate – No Skirt |
96-Well |
| 96-9619B |
Blue 100µL Low Profile PCR Plate – No Skirt |
96-Well |
| 96-9625 |
250µL Raised Rim PCR Plate |
96-Well |
| 96100B |
Blue 100µL Skirted Low Profile Plate |
96-Well |
| 96323B |
Black 100µL Skirted Low Profile PCR Plate |
96-Well |
| 969610B |
Blue 200µL PCR Plate – Flat Well Rim |
96-Well |
| 969620B |
250µL PCR Plate, Blue |
96-Well |
| 969621B |
Blue Stackable 96 Position PCR Racks |
96-Position |
| 21012 |
Deep Well Reservoir, 12 Channel |
12-Column |
| 24108 |
24-Well Reservoir Plate, Square Well/Pyramid Bottom |
24-Well |
| 24296 |
Low Profile Reservoir, 24 Channel (Columns) |
24-Column |
| 24727 |
24-Well Reservoir Plate, Square Well/Round Bottom |
24-Well |
| 24777 |
24-Well Clear Silicone Cap Mat |
24-Position |
| 32008 |
Deep Well Reservoir, 8 Channel |
8-Channel, 96-Well |
| 32018 |
Low Profile Reservoir, 16 Channel |
16-Channel, 384-Well |
| 32082 |
Low Profile Reservoir, 8 Channel |
8-Channel, 96-Well |
| 38422 |
Low Profile Reservoir, Open Flat Bottom |
Open/384?? |
| 38444 |
Half-Height Reservoir, 384-Position Base with Four Control Columns |
Special |
| 38455 |
Half-Height Reservoir, 384-Well |
Open/384 |
| 38471 |
Deep Well Reservoir, 384-Position Base |
Open/384 |
| 38477 |
384-Position Deep Well Reservoir with Two Controls Wells |
384 Position |
| 38481 |
Low Profile Reservoir, 384-Well |
384 Position |
| 38485 |
Low Profile Storage Plate with Four Control Wells and Center Reservoir |
Special |
| 47005 |
Low Profile Reservoir, 12 Channel |
12-Channel |
| 47006 |
Deep Well Reservoir, 6 Channel |
24-Position Base, 6-Channel |
| 47025 |
Low Profile Reservoir, 24 Channel (12 Columns, 2 Rows) |
2 rows of 12 columns, 24-Well |
| 47170 |
Half-Height Reservoir, 12 Channel |
12-Channel |
| 48685 |
48-Well Storage/Reaction Microplate, 5mL |
48-Well |
| 48687 |
48-Well Storage/Reaction Microplate, 7.5mL |
48-Well |
| 55001 |
Dual Reservoir with Lid |
Special |
| 69500 |
Reservoir Lid, Clear |
100 |
| 96012 |
V-Trough for 12 Position Multi Channel Pipetor, 8 Channel |
8-Channel |
| 96013 |
V-Trough for Multi-Channel Pipetors, 12 Channel |
12-Channel |
| 96173 |
Single Cavity Waste Reservoir |
96-Position |
| 96174 |
Single Cavity Waste Reservoir – Irradiated |
96-Position |
| 96473 |
Deep Well Reservoir, Four Rows |
4-Rows |
| 96733 |
Deep Well Reservoir, Four Columns |
4-Columns |
| 960395 |
Deep Well Reservoir, Three Columns |
3-Columns |
| 962144 |
Deep Well Reservoir, Two Columns |
2-Columns |
| 24010CM |
Square Santoprene Cap Mat for 24-Well Plate |
24 Position |
| 69500BK |
Reservoir Lid, Black |
100 |
| DSBPVC |
Clear PVC Disposable Basins |
V-Bottom |
| DSBWPS |
White Polystyrene Disposable Basins |
V-Bottom |
| AluFit10 |
AluFit Heat Transfer Collar for 10cm Columns |
|
| AluFit15 |
AluFit Heat Transfer Collar for 15cm Columns |
|
| AluFit25 |
AluFit Heat Transfer Collar for 25cm Columns |
|
| AluFit30 |
AluFit Heat Transfer Collar for 30cm Columns |
|
| AluFitKit |
AluFit Heat Transfer Collar Kit |
|
| CapWrap10 |
Capillary Column Wrap, 10cm |
|
| CapWrap15 |
Capillary Column Wrap, 15cm |
|
| CapWrap25 |
Capillary Column Wrap, 25cm |
|
| CapWrap30 |
Capillary Column Wrap, 30cm |
|
| CapWrap5 |
Capillary Column Wrap, 5cm |
|
| ADV6050 |
Mobile Phase Pre-Heater Assembly for Waters Aquity UHPLC System |
|
| ADV65107 |
Mobile Phase Pre-Heater Assembly with Double UHPLC Fittings, 50cm |
|
| ADV66107 |
Mobile Phase Pre-Heater Assembly with Double UHPLC Fittings, 60cm |
|
| ADV9000 |
Pre-Column Pre-Heater |
|
| ADV9000UHP |
Pre-Column Pre-Heater |
|
| ADV9005 |
Prep Pre-Column Pre-Heater |
|
| ADV9038 |
3.8µL Mobile Phase Pre-Heater |
|
| ADV9500UHP |
3.8µL Mobile Phase Pre-Column Pre-Heater |
|
| Cold Sleeve-30 |
ColdSLEEVE Column Cooler/Heater |
|
| HSI-0814L |
HotSleeve+ Column Heater – 0.8″ x 14″ |
|
| HSI-1005L |
HotSleeve+ Column Heater – 1″ x 5″ |
|
| HSI-1012L |
HotSleeve+ Column Heater – 1″ x 12″ |
|
| HSI-1014L |
HotSleeve+ Column Heater – 1″ x 14″ |
|
| HSI-10L |
HotSleeve+ Column Heater – 10cm |
|
| HSI-1512L |
HotSleeve+ Column Heater – 1.5″ x 12″ |
|
| HSI-15L |
HotSleeve+ Column Heater – 15cm |
|
| HSI-1712L |
HotSleeve+ Column Heater – 1.75″ x 12″ |
|
| HSI-2012L |
HotSleeve+ Column Heater – 2″ x 12″ |
|
| HSI-25L |
HotSleeve+ Column Heater – 25cm |
|
| HSI-30L |
HotSleeve+ Column Heater – 30cm |
|
| HSI-5L |
HotSleeve+ Column Heater – 5cm |
|
| MonoSLEEVE |
MonoSLEEVE Single Column Heater Controller |
Each |
| MultiSLEEVE |
MultiSLEEVE 4 Port Temperature Control Unit |
Each |
| 327300 |
3mm Dried Blood Spot Card Punch, Complete System |
|
| 327400 |
4mm Dried Blood Spot Card Punch, Complete System |
|
| 327500 |
5mm Dried Blood Spot Card Punch, Complete System |
|
| 327600 |
6mm Dried Blood Spot Card Punch, Complete System |
|
| 327301 |
3mm DBS Punch Pod with Foot Pneumatics and Tubing |
|
| 327401 |
4mm DBS Punch Pod with Foot Pneumatics and Tubing |
|
| 327501 |
5mm DBS Punch Pod with Foot Pneumatics and Tubing |
|
| 327601 |
6mm DBS Punch Pod with Foot Pneumatics and Tubing |
|
| 327903 |
Cutter for 3mm DBS Punch |
|
| 327904 |
Cutter for 4mm DBS Punch |
|
| 327905 |
Cutter for 5mm DBS Punch |
|
| 327906 |
Cutter for 6mm DBS Punch |
|
| 327888 |
Replacement Pipette |
|
| ADV-DM |
Dynamic Mixer |
|
| 61-113 |
Replacement Analytical-03 Resistor Cartridge, Ratio 15:1-250:1 |
|
| 61-114 |
Replacement Analytical-04 Resistor Cartridge, Ration 4:1-100:1 |
|
| 61-115 |
Replacement Analytical-06 Resistor Cartridge, Ratio 1:1-20:1 |
|
| 62-411 |
Stainless Steel Adjustable Flow Splitter with -01 resistor, Post Column, Ratio 50:1 to 1000:1 |
1 |
| 62-412 |
Stainless Steel Adjustable Flow Splitter with -03 resistor, Post Column, Ratio 15:1 to 250:1 |
1 |
| 62-413 |
Stainless Steel Adjustable Flow Splitter with -04 resistor, Post Column, Ratio 5:1 to 100:1 |
1 |
| 62-414 |
Stainless Steel Adjustable Flow Splitter with -06 resistor, Post Column, Ratio 1:1 to 20:1 |
1 |
| 66-063 |
Replacement Analytical Inlet Filter |
|
| 60-104 |
Analytical Adjustable Flow Splitter, Pre-Column, Split Ratio Range – 5:1 to 100:1 |
|
| 62-316 |
Adjustable Preparative Splitter, Stainless Steel |
|
| 62-311 |
Semi-Prep Adjustable Flow Splitter, Post Column |
|
| 62-312 |
Semi-Prep Adjustable Flow Splitter, Post Column |
|
| 62-313 |
Semi-Prep Adjustable Flow Splitter, Post Column |
|
| 62-315 |
Semi-Prep Adjustable Flow Splitter, Post Column |
|
| 63-111 |
Mounting Bracket for Fixed Flow Splitter |
|
| 53-112 |
Model 53 Three Port Post Column Fixed Flow Splitter Manifold |
|
| 53-114 |
Custom Model 53 Four Port Fixed Flow Splitter Manifold |
|
| 63-413 |
Binary Fixed Flow Splitter Manifold 2000:1 Post Column |
|
| 63-414 |
Binary Fixed Flow Splitter Manifold 1000:1 Post Column |
|
| 63-415 |
Binary Fixed Flow Splitter Manifold 500:1 Post Column |
|
| 63-416 |
Binary Fixed Flow Splitter Manifold 200:1 Post Column |
|
| 63-417 |
Binary Fixed Flow Splitter Manifold 100:1 Post Column |
|
| 63-418 |
Binary Fixed Flow Splitter Manifold 50:1 Post Column |
|
| 63-419 |
Binary Fixed Flow Splitter Manifold 20:1 Post Column |
|
| 63-420 |
Binary Fixed Flow Splitter Manifold 10:1 Post Column |
|
| 63-421 |
Binary Fixed Flow Splitter Manifold 5:1 Post Column |
|
| 63-422 |
Binary Fixed Flow Splitter Manifold 3:1 Post Column |
|
| 63-423 |
Binary Fixed Flow Splitter Manifold 1:1 Post Column |
|
| 63-424 |
Fixed Splitter 4:1 Ratio Post Column |
|
| 63-425 |
Custom Binary Fixed Splitter 2:1 Ratio 0.45 incoming to 0.15/0.3mL Split |
|
| 63-402 |
Binary Fixed Flow Splitter Manifold 2000:1 |
|
| 63-405 |
Binary Fixed Flow Splitter Manifold 500:1 |
|
| 63-410 |
Binary Fixed Flow Splitter Manifold 1000:1 |
|
| 77-125 |
Replacement Binary Analytical Inlet Filter |
|
| 63-436 |
Binary Fixed Flow Splitter Replacement Resistor Set for Model 63 Splitter Manifold 200:1 |
|
| 63-437 |
Binary Fixed Flow Splitter Replacement Resistor Set for Model 63 Splitter Manifold 100:1 |
|
| 63-438 |
Binary Fixed Flow Splitter Replacement Resistor Set for Model 63 Splitter Manifold 50:1 |
|
| 63-439 |
Binary Fixed Flow Splitter Replacement Resistor Set for Model 63 Splitter Manifold 20:1 |
|
| 63-440 |
Binary Fixed Flow Splitter Replacement Resistor Set for Model 63 Splitter Manifold 10:1 |
|
| 63-441 |
Binary Fixed Flow Splitter Replacement Resistor Set for Model 63 Splitter Manifold 5:1 |
|
| 63-442 |
Binary Fixed Flow Splitter Replacement Resistor Set for Model 63 Splitter Manifold 3:1 |
|
| 63-443 |
Binary Fixed Flow Splitter Replacement Resistor Set for Model 63 Splitter Manifold 1:1 |
|
| 63-433 |
Binary Fixed Flow Splitter Replacement Resistor Set for Model 63 Splitter Manifold 2000:1 |
|
| 63-434 |
Binary Fixed Flow Splitter Replacement Resistor Set for Model 63 Splitter Manifold 1000:1 |
|
| 63-435 |
Binary Fixed Flow Splitter Replacement Resistor Set for Model 63 Splitter Manifold 500:1 |
|
| 452800 |
Stainless Steel Inline Check Valve |
|
| 452818 |
Replacement Ball Cartridge for SS Inline Check Valve |
|
| 73421 |
Pulse Damper – High Capacity |
|
| 73515 |
Pulse Damper |
|
| 7591000 |
Pulse Damper, High Volume, Ultra High Pressure HPLC |
|
| 91-4012 |
Pulse Damper, Minipulse |
|
| 1300035-01 |
SS Analytical Flow 350µL Static Bed Mixer – Cartridge Only |
|
| 1300042-10 |
SS Analytical Flow Series Inline Static Bed Mixer – Housing Only |
|
| 1300042-20 |
SS Analytical Flow Binary Static Bed Mixer – Housing Only |
|
| 1300042-30 |
SS Analytical Flow Ternary Static Bed Mixer – Housing Only |
|
| 1300050-01 |
SS Analytical Flow 500µL Static Bed Mixer – Cartridge Only |
|
| 1300150-01 |
SS Analytical Flow 500µL Binary Tee Static Bed Mixer – Complete Assembly |
|
| 1300235-01 |
SS Analytical Flow 350µL Binary Tee Static Bed Mixer – Complete Assembly |
|
| 1300350-01 |
SS Analytical Flow 350µL Inline Static Bed Mixer – Complete Assembly |
|
| 1300435-51 |
SS Analytical Flow 350µL Ternary Tee Static Bed Mixer – Complete Assembly |
|
| 1300450-51 |
SS Analytical Flow 500µL Ternary Tee Static Bed Mixer – Complete Assembly |
|
| 1300500-01 |
SS Analytical Flow 500µL Inline Static Bed Mixer – Complete Assembly |
|
| 1300111-00 |
SS High Flow 1mL Inline Static Bed Mixer – Complete Assembly |
|
| 1300150-00 |
SS High Flow 1.5mL Inline Static Bed Mixer – Complete Assembly |
|
| 130043-10 |
SS High Flow Inline Static Bed Mixer – Housing Only |
|
| 130043-20 |
SS High Flow Binary Tee Static Bed Mixer – Housing Only |
|
| 130043-30 |
SS High Flow Ternary Tee Static Bed Mixer – Housing Only |
|
| 1300800-00 |
SS High Flow 800µL Inline Static Bed Mixer – Complete Assembly |
|
| 1320111-00 |
SS High Flow 1mL Binary Tee Static Bed Mixer – Complete Assembly |
|
| 1320150-00 |
SS High Flow 1.5mL Binary Tee Static Bed Mixer – Complete Assembly |
|
| 1320800-00 |
SS High Flow 800µL Binary Tee Static Bed Mixer – Complete Assembly |
|
| 1330111-00 |
SS High Flow 1.0mL Ternary Tee Static Bed Mixer – Complete Assembly |
|
| 1330150-00 |
SS High Flow 1.5mL Ternary Tee Static Bed Mixer – Complete Assembly |
|
| 1330800-00 |
SS High Flow 800µL Ternary Tee Static Bed Mixer – Complete Assembly |
|
| 1400100-00 |
SS High Flow 1.0mL Static Bed Mixer – Cartridge Only |
|
| 1400150-00 |
SS High Flow 1.5mL Static Bed Mixer – Cartridge Only |
|
| 1400800-00 |
SS High Flow 800µL Static Bed Mixer – Cartridge Only |
|
| 1300000-00 |
SS Low Flow In-Line Static Bed Mixer – Housing Only |
|
| 1300005-01 |
SS Lowl Flow 50µL Static Bed Mixer – Cartridge Only |
|
| 1300015-01 |
SS Lowl Flow 150µL Static Bed Mixer – Cartridge Only |
|
| 1300025-01 |
SS Low Flow 250µL Static Bed Mixer – Cartridge Only |
|
| 1300105-01 |
SS Low Flow 50µL Binary Tee Static Bed Mixer – Complete Assembly |
|
| 1300115-01 |
SS Low Flow 150µL Binary Tee Static Bed Mixer – Complete Assembly |
|
| 1300125-01 |
SS Low Flow 250µL Binary Tee Static Bed Mixer – Complete Assembly |
|
| 1300205-01 |
SS Low Flow 50µL Inline Static Bed Mixer – Complete Assembly |
|
| 1300215-01 |
SS Low Flow 150µL Inline Static Bed Mixer – Complete Assembly |
|
| 1300225-01 |
SS Low Flow 250µL Inline Static Bed Mixer – Complete Assembly |
|
| 1300300-00 |
SS Low Flow Ternnary Tee Static Bed Mixer – Housing Only |
|
| 1300305-01 |
SS Low Flow 50µL Ternary Tee Static Bed Mixer – Complete Assembly |
|
| 1300315-51 |
SS Low Flow 150µL Ternary Tee Static Bed Mixer – Complete Assembly |
|
| 1300325-51 |
SS Low Flow 250µL Ternary Tee Static Bed Mixer – Complete Assembly |
|
| 1300000-01 |
SS Micro Flow 10µL Static Bed Mixer – Cartridge Only |
|
| 1300000-21 |
SS Micro Flow 2.0µL Static Bed Mixer – Cartridge Only |
|
| 1300000-31 |
SS Micro Flow 0.5µL Static Bed Mixer – Cartridge Only |
|
| 1300000-41 |
SS Micro Flow 1.0µL Static Bed Mixer – Cartridge Only |
|
| 1300000-51 |
SS Micro Flow 5.0µL Static Bed Mixer – Cartridge Only |
|
| 1300002-51 |
SS Micro Flow 25µL Static Bed Mixer – Cartridge Only |
|
| 1300200-00 |
SS Micro Flow Inline Static Bed Mixer – Housing Only |
|
| 1300200-21 |
SS Micro Flow 2.0µL Inline Static Bed Mixer – Complete Assembly |
|
| 1300200-31 |
SS Micro Flow 0.5µL Inline Static Bed Mixer – Complete Assembly |
|
| 1300200-41 |
SS Micro Flow 1.0µL Inline Static Bed Mixer – Complete Assembly |
|
| 1300200-51 |
SS Micro Flow 5.0µL Inline Static Bed Mixer – Complete Assembly |
|
| 1300201-01 |
SS Micro Flow 10.0µL Inline Static Bed Mixer – Complete Assembly |
|
| 1300202-51 |
SS Micro Flow 25.0µL Inline Static Bed Mixer – Complete Assembly |
|
| 1300240-00 |
SS Micro Flow Binary Static Bed Mixer – Housing Only |
|
| 1300240-02 |
SS Micro Flow 2.0µL Binary Tee Static Bed Mixer – Complete Assembly |
|
| 1300240-05 |
SS Micro Flow 5.0µL Binary Tee Static Bed Mixer – Complete Assembly |
|
| 1300240-10 |
SS Micro Flow 10µL Binary Tee Static Bed Mixer – Complete Assembly |
|
| 1300240-25 |
SS Micro Flow 25µL Binary Tee Static Bed Mixer – Complete Assembly |
|
| 1300240-31 |
SS Micro Flow 0.5µL Binary Tee Static Bed Mixer – Complete Assembly |
|
| 1300240-41 |
SS Micro Flow 1.0µL Binary Tee Static Bed Mixer – Complete Assembly |
|
| 1300340-00 |
SS Micro Flow Ternary Static Bed Mixer – Housing Only |
|
| 1300340-02 |
SS Micro Flow 2.0µL Ternary Tee Static Bed Mixer – Complete Assembly |
|
| 1300340-05 |
SS Micro Flow 5.0µL Ternary Tee Static Bed Mixer – Complete Assembly |
|
| 1300340-10 |
SS Micro Flow 10µL Ternary Tee Static Bed Mixer – Complete Assembly |
|
| 1300340-25 |
SS Micro Flow 25µL Ternary Tee Static Bed Mixer – Complete Assembly |
|
| 1300340-31 |
SS Micro Flow 0.5µL Ternary Tee Static Bed Mixer – Complete Assembly |
|
| 1300340-41 |
SS Micro Flow 1.0µL Ternary Tee Static Bed Mixer – Complete Assembly |
|
| 1506 |
MiniLIght |
|
| 1551 |
Tubing Cutter for 1/8″ and 1/16″ OD Stainless Steel Tubing |
|
| 1600 |
Tubing Clip |
|
| 1650 |
SS Tube Cutting Pliers |
|
| 1651 |
Polymer Tubing Cutter with 5 Different Size Ports |
|
| 1652 |
Replacement Blade for (1651) Polymer Tubing Cutter |
|
| 49304 |
Wrench Double-Open 1/4″-5/16″ |
|
| 49305 |
Wrench Double-Open 1/2″ x 9/16″ |
|
| 49320 |
Wrench Double-Open 3/8″-7/16″ |
|
| 49327 |
Polymer Tubing Cutter |
|
| 49328 |
Replacement Blades for 49327 & 49329 Tubing Cutters |
|
| 49329 |
Large Bore Polymer Tubing Cutter |
|
| 59298 |
Extender Tightening Tool for Flangeless Nuts |
|
| 59299 |
Aluminum Flangeless Nut Extender Tool for Standard Head Fittings |
|
| 61629 |
Ferrule Remover |
|
| 66788 |
Valvtool – 1/4″ and 5/16″ Combo Wrench |
|
| 68290 |
Extender Tool |
|
| ADV9850 |
Chromatography Tool Kit |
|
| ADV9851 |
Stainless Steel Tubing Straightener |
|
| FS-101 |
Ferrule Saver |
|
| PSHOLDER |
Custom Power Strip Holder |
|
| TT1001 |
Terry Tool Rotary SS Tubing Cutter for 1/16″ OD Tubing |
|
| TT1002 |
Terry Tool Rotary SS Tubing Cutter for 1/8″ OD Tubing |
|
| WRENCH-10 |
10″ Adjustable Wrench |
|
| WRENCH-12 |
12″ Adjustable Wrench |
|
| WRENCH-6 |
6″ Adjustable Wrench |
|
| WRENCH-8 |
8″ Adjustable Wrench |
|
| 59626 |
PEEK Adapter, .020″ ID, 10-32 to M6 |
|
| 59627 |
PEEK Adapter, .020″ ID, 10-32 to 1/4-28 |
|
| 59640 |
Kel-F® Adapter, .040″ ID, 10-32 to 1/4-28 |
|
| 59652 |
PEEK Adapter, 1/4-28 to 10-32 |
|
| 59654 |
PEEK Extra-Long Adapter, 0.030″ ID, 1/4-28 to 10-32 |
|
| 59671 |
Teflon® Adapter, 0.040″ ID, 1/4-28 Female to 1/4-28 Male |
|
| 59672 |
PEEK Adapter, .050″ ID, 1/4-28 to 10-32 Flat Bottom |
|
| 59681 |
Adapter, 5/16-24 To 1/4-28. 0.125″ (3.20mm) Thru Hole |
|
| 64284 |
PEEK Column Couplers |
|
| 64287 |
PEEK 2 Piece Column Coupler |
|
| 415834 |
SS Adapter, .040″ ID, Female/Female 10-32 to 1/4-28 OD |
|
| 415874 |
SS Adapter, 0.040″ ID, 10-32 to M6 |
|
| 415914 |
SS Adapter, .040″ ID, 10-32 Female to 1/4-28 Male |
|
| ADV-CC |
Kel-F® Column Coupler with 0.01″ ID Thru-Hole |
|
| ADV-PCC |
PEEK One Piece Column Coupler with 0.01″ID Thru-Hole |
|
| 1608 |
SS Column Plug, 1/16″ OD |
Oct-32 |
| 1610 |
SS Column Plug, 1/8″ OD |
5/16/2024 |
| 1654 |
Custom One Piece Fitting with Fat Head |
1/16″ |
| 1655 |
Custom 1-Piece X-Long Fitting w/ Fat Head |
1/16″ |
| 55120 |
PEEK 1-Piece Fingertight Fitting, 10-32 |
Oct-32 |
| 55124 |
PEEK Fitting for 360µm OD Tubing |
Jun-32 |
| 66008 |
Delrin® Plug, M8 x 1.25mm |
M8 |
| 847514 |
1 Piece Reusable SS Fitting for 1/16″ OD SS Tubing |
1/16″ |
| 66312-5 |
Delrin® Column Plugs, Red |
Oct-32 |
| 66313-3 |
Delrin® Column Plugs, Black |
Oct-32 |
| 66514-1 |
PEEK 1-Piece Fingertight Fitting (5 pack) |
1/16″ |
| 66517-1 |
PEEK Long-One-Piece Fingertight Fitting |
1/16″ |
| 66518-3 |
PEEK UHPLC One-Piece Fitting |
1/16″ |
| 847325X |
Long 1 Piece Reusable SS Fitting for 1/16″ OD SS Tubing |
1/16″ |
| 46000-2824 |
RheFlex® PEEK One-Piece Fittings |
1/16″ |
| 46000-2824BL |
RheFlex® PEEK One-Piece Fittings |
1/16″ |
| 46000-2824GN |
RheFlex® PEEK One-Piece Fittings |
1/16″ |
| 46000-2824GY |
RheFlex® PEEK One-Piece Fittings |
1/16″ |
| 46000-2824RD |
RheFlex® PEEK One-Piece Fittings |
1/16″ |
| 46000-2824YL |
RheFlex® PEEK One-Piece Fittings |
1/16″ |
| 46000-2834 |
Rheflex® ChromTRAC™ Multicolor Fitting Knobs Kit |
|
| 46000-3604 |
RheFlex® PEEK One-Piece Fitting for 1/32″ OD Tubing, M4 |
M4 |
| 46000-0514 |
RheFlex® PEEK 1/16″ Ferrules |
Oct-32 |
| 46000-0544 |
RheFlex® PEEK 1/16″ Fittings Set |
Oct-32 |
| 46000-0554 |
RheFlex® PEEK 1/16″ Short Fittings Set |
Oct-32 |
| 46000-0904 |
RheFlex® PEEK 1/16″ Plugs |
Oct-32 |
| 46000-1094 |
RheFlex® 1/16″ Stainless Steel Fittings Set |
Oct-32 |
| 46000-1104 |
RheFlex® 1/16″ Stainless Steel Ferrules |
Oct-32 |
| 46000-1114 |
RheFlex® 1/16″ Stainless Steel Long Fittings Set |
Oct-32 |
| 46000-1624 |
RheFlex® 1/16″ SS Extra-Long Fittings Set |
Oct-32 |
| 46000-2554 |
RheFlex® PEEK 1/16″ Short Fittings Set |
Oct-32 |
| 68561-1 |
PEEK Ferrule and SS Ring for Lite-Touch® Fitting |
1/16″ |
| 68562-1 |
Lite-Touch® Fitting, PEEK Nut, 10-32 |
1/16″ |
| 68563-1 |
PEEK Ferrule and SS Ring for Lite-Touch® Fitting |
1/8″ |
| 68564-1 |
PEEK Lite Touch Nuts for 1/8″ Tubing, 1/4-28 |
1/8″ |
| 68565-1 |
Removal Tool for Lite-Touch® Ferrules |
|
| SDY-102 |
Replacement Polymer Ferrules for SDY-201 |
1/16″ |
| SDY-103 |
Replacement SS Collets for SDY-201 |
1/16″ |
| SDY-201 |
Double Ferrule Fingertight SS Fitting |
1/16″ |
| 84904 |
PEEK 1/32″ M4 UHPLC One-Piece Fitting with Headless Knurl |
1/32″ |
| 1183X |
SS Ferrule for SS Fitting (1186X), for 1/32″ OD Tubing |
1/32″ |
| 1186X |
SS Nut with (1183X) Ferrule for 1/32″ OD Tubing |
1/32″ |
| 1286X |
SS Nut with (1283X) Ferrule for 1/16″ OD Tubing |
1/16″ |
| 55142X |
PEEK Replacement Ferrule for 10/32 PEEK Fittings |
1/16″ |
| 55160X |
SS Fingertight Nut with Ferrule, 1/4-28 |
1/4/2028 |
| 55192X |
PEEK UHPLC Ferrule for 55195X & 55196X |
1/16″ |
| 55195X |
PEEK UHPLC Fitting – Short Nut, 10-32 |
1/16″ |
| 55196X |
PEEK UHPLC Fitting – Long Nut, 10-32 |
1/16″ |
| 55301X |
PEEK Two-Piece Fitting w/ Ferrule, 1/4-28, for 1/8″ OD Tubing |
1/8″ |
| 55330X |
PEEK Two-Piece Long Fitting with 55142 Ferrule, 10-32 |
1/16″ |
| 60100X |
PEEK Ferrule w/ SS Ring, for 1/16″ OD Tubing |
1/16″ |
| 60110X |
PEEK Nut for 1/16″ OD Tubing, 10-32 Thread |
1/16″ |
| 60126X |
One-Piece 6-32 Fitting for 1/32″ OD Tubing, 15,000 psi |
1/32″ |
| 60132X |
PEEK Ferrule w/ SS Ring, for 1/32″ OD Tubing |
1/32″ |
| 66519-1 |
PEEK Two Piece Fitting with 55142 Ferrule, 10-32 |
1/16″ |
| 4140-00 |
Custom Universal PEEK HPLC Fittings Kit for Hewlett-Packard (Agilent) |
|
| Nov-40 |
Custom SS Fittings Kit for Waters HPLC Systems |
|
| 4140-22 |
Custom PEEK HPLC Fittings Kit |
|
| 4140-33 |
Quick Connect Custom PEEK HPLC Fittings Kit for 1/8″ OD Tubing |
|
| 4142-00 |
Custom PEEK HPLC Fittings Kit |
|
| 4143-15 |
Custom SS HPLC Fittings Kit |
|
| 4156-63 |
Custom High Pressure PEEK Fittings Kit |
|
| 4158-66 |
Custom Lite Touch PEEK Fittings Kit |
|
| ADV-LCMS |
LCMS Fittings Kit |
|
| 1620 |
2.0µm Direct Connect In-Line Column Filter Guard for 1/16″ Tubing, 10-32 |
|
| 48135 |
Low Volume Inline Filter |
|
| 48155 |
Replacement 2.0µm Frits for Low Volume Inline Filter (48135) |
|
| 49314 |
2µm SS Inline Solvent Filter Assembly with 49100 Frit |
|
| 49315 |
2µm PreColumn Solvent Filter Assembly with 49101 Frit |
|
| 49316 |
0.5µm Pre Column Solvent Filter Assembly with 49102 Frit |
|
| 49318 |
0.5µm SS Pre Column Inline Solvent Filter Assembly with 49102 Frit |
|
| 49355 |
2µm PEEK Pre-Column Solvent Filter Assembly with 49701 PEEK Frit |
|
| 49356 |
0.5µm PEEK Pre-Column Solvent Filter Assembly with 49701 PEEK Frit |
|
| 521000 |
Semi-Prep Guard Column Holder |
|
| 49100X |
2µm Replacement SS Frits, .094″ x .062″ x .250″ |
|
| 49101X |
2µm Replacement SS Frits, .062″ x .062″ x .250″ |
|
| 49102X |
0.5µm Replacement SS Frits, .062″ x .062″ x .250″ |
|
| 49103X |
0.5µm Replacement SS Frits, .094″ x .062″ x .250″ |
|
| 49700X |
2µm PEEK Replacement Frits, .062″ x .062″ x .250″ |
|
| 49701X |
0.5µm PEEK Replacement Frits, .062″ x .062″ x .250″ |
|
| 52401X |
2µm SS Replacement Frits, .125″ x .062″ x .250″ |
|
| 52402X |
2µm SS Replacement Frits, .188 x .074 x .254 |
|
| 55142 |
PEEK Replacement Ferrule |
1/16″ |
| 59133 |
Tefzel® Ferrule for 3/16″ OD Tubing |
Blue |
| 59221 |
PP Ferrule for 1/16″ OD Tubing |
1/16″ |
| 59200NX |
ETFE Ferrule for 1/16″ OD Tubing |
1/16″ |
| 59200R |
ETFE Ferrule for 1/16″ OD Tubing |
1/16″ |
| 59200X |
ETFE Ferrule for 1/16″ OD Tubing |
1/16″ |
| 59240X |
Tefzel® Small Valve Ferrule for 1/16″ OD Tubing |
1/16″ |
| 59300NX |
ETFE Ferrule for 1/8″ OD Tubing |
1/8″ |
| 59300X |
Tefzel® Ferrule for 1/8″ OD Tubing |
1/8″ |
| 59340X |
Tefzel® Small Valve Ferrule with Sealing Ring for 1/8″ OD Tubing |
1/8″ |
| 59353X |
ETFE Ferrule for Waters M2767 solenoid dispensing valve |
Clear |
| 59130 |
PEEK Large Bore Flangeless Nut for 1/8″ OD Tubing |
5/16/2024 |
| 59204 |
Delrin® Flangeless Nut for 1/16″ OD Tubing |
1/16″ |
| 59230 |
PEEK Flangeless Nut for 1/16″ OD Tubing |
1/16″ |
| 59286 |
PPS Headless Flangeless Nut for 1/16″ OD Tubing |
1/16″ |
| 59302 |
Delrin® Flangeless Nut for 1/8″ OD Tubing |
1/8″ |
| 59303 |
Delrin® Flangeless Nut for 1/8″ OD Tubing |
1/8″ |
| 59315 |
Tefzel® 1/8″ Flangeless Nut |
1/8″ |
| 56111X |
Flangeless Short Nut for 1/16″OD Tubing |
Oct-32 |
| 59201X |
Delrin® Flangeless Nut for 1/16″ OD Tubing |
1/16″ |
| 59202X |
Delrin® Flangeless Nut for 1/16″ OD Tubing |
1/16″ |
| 59204X |
Delrin® Flangeless Nut for 1/16″ OD Tubing |
1/4/2028 |
| 59205X |
Delrin® Flangeless Nut for 1/16″ OD Tubing |
1/16″ |
| 59206X |
Delrin® Flangeless Nut for 1/16″ OD Tubing |
1/16″ |
| 59210X |
Tefzel® Extra-Long Nut for Dionex Systems |
1/16″ |
| 59220X |
PP Flangeless Nut for 1/16″ OD Tubing |
1/4/2028 |
| 59301X |
Delrin® Flangeless Nut for 1/8″ OD Tubing |
1/8″ |
| 59305X |
Delrin® Flangeless Nut for 1/8″ OD Tubing |
1/8″ |
| 59306X |
Delrin® Flangeless Nut for 1/8″ OD Tubing |
1/8″ |
| 59307X |
Delrin® M6 Nut for 1.8, 2.0, 3.0mm & 1/8″ OD Tubing |
1/8″ |
| 59308X |
Delrin® Short Flangeless Nut for 1/8″ OD Tubing |
1/8″ |
| 59320X |
PP Flangeless Nut for 1/8″ OD Tubing |
1/8″ |
| 59330X |
PEEK Flangeless Nut for 1/8″ OD Tubing |
1/8″ |
| 59335X |
PEEK Short Flangeless Nut for 1/8″ OD Tubing |
1/8″ |
| 59345X |
Tefzel® Flangeless Male Nut for 1/8″ OD Tubing |
1/8″ |
| 95811X |
Flangeless Nut for 1/16″ OD Tubing |
Oct-32 |
| 59132 |
PEEK Large Bore Flangeless Nut for 3/16″and 4.0mm OD Tubing |
5/16/2024 |
| 59134 |
PEEK Large Bore ZDV Union, 5/16-24 Female |
5/16/2024 |
| 59136 |
PEEK Flangeless Nut for 1/16″ OD Tubing |
5/16/2024 |
| 59557 |
Plug for 5/16-24 Flat Bottom Port |
5/16/2024 |
| 89660 |
ETFE Flangeless Ferrule for 5/16″ OD Tubing |
1/2/2020 |
| 89662 |
PEEK/Tefzel® Flangeless Fitting for 5/16″ OD Tubing |
5/16″ |
| 97130 |
PEEK/Tefzel® Flangeless Fitting for 1/8″OD Tubing |
16-May |
| 97131 |
PEEK/Tefzel® Super Flangeless Fitting for 1/8″ OD Tubing |
5/16/2024 |
| 97132 |
Flangeless Fitting for 3/16″ OD Tubing |
3/16″ |
| 97132X |
Flangeless Fitting for 3/16″ OD Tubing (10 pack) |
3/16″ |
| 97141 |
PEEK/Tefzel® Super Flangeless Fitting for 1/16″OD Tubing |
5/16/2024 |
| 59512 |
PEEK Y Connector with .020″ Thru-Hole for 1/16″ OD Tubing |
|
| 59513 |
PEEK Y Connector with .040″ Thru-Hole for 1/8″ OD Tubing |
|
| 59514 |
PEEK Y Connector with .060″ Thru-Hole for 1/8″ OD Tubing |
|
| 59515 |
PEEK Y Connector with .125″ Thru-Hole for 3/16″ OD Tubing |
|
| 59656 |
PEEK Quick Connect Luer Adapter Male Luer to 10-32 Female, Natural |
|
| 59657 |
Quick Connect Luer Adapter – Male Luer To M6 Female, Black |
|
| 59658 |
PEEK Quick Connect Luer Adapter – Female Luer to 1/4-28 Female, Red |
|
| 59659 |
PEEK Quick Connect Luer Adapter – Female Luer to 10-32 Female, Natural |
|
| 59660 |
Quick Connect Luer Adapter – Female Luer To M6 Female, Black |
|
| 59675 |
Tefzel® Quick Connect Luer Adapter – Male Luer to 1/4-28 Female, Red |
|
| 59676 |
Tefzel® Quick Connect Luer Adapter – Male Luer to 10-32 Female, Natural |
|
| 59678 |
Tefzel® Quick Connect Luer Adapter – Female Luer to 1/4-28 Female, Red |
|
| 59679 |
Tefzel® Quick Connect Luer Adapter – Female Luer to 10-32 Female, Natural |
|
| 59604 |
Delrin® Luer Adapter – Female Luer to 1/4-28 Male |
|
| 59605 |
Delrin® Slip Style Luer Adapter – Male Luer to 1/4-28 Male |
|
| 59618 |
Polypropylene Slip Style Luer Adapter – Female Luer to 1/4-28 Male |
|
| 59619 |
Polypropylene Slip Style Luer Adapter – Male Luer to 1/4-28 Male |
|
| 59624 |
Tefzel® Slip Style Luer Adapter – Female Luer to 1/4-28 Male |
|
| 59625 |
Tefzel® Slip Style Luer Adapter – Male Luer to 1/4-28 Male |
|
| 59628 |
Tefzel® Slip Style Luer Adapter – Female Luer to 1/4-28 Female |
|
| 59629 |
Tefzel® Slip Style Luer Adapter – Female Luer to10-32 Female |
|
| 59642 |
Tefzel® Slip Style Luer Adapter – Female Luer to 10-32 Male |
|
| 57652 |
PEEK Super Flangeless Short Hex Nut |
1/16″ |
| 57653 |
PEEK Super Flangeless Short Knurl Nut |
1/16″ |
| 57655 |
PEEK Long Super Flangeless Hex Nut |
1/16″ |
| 59331 |
PEEK Super Flangeless Nut |
1/4/2028 |
| 57250X |
ETFE Ferrule with SS Locking Ring |
1/16″ |
| 59140X |
Low Pressure 3/16″ Ferrules with SS Rings |
3/16″ |
| 59207X |
Super Flangeless M6 Nut for 1/16″ Tubing |
1/16″ |
| 59250X |
PEEK Super Flangeless Ferrule with SS Lock Ring for 1/16″ OD Tubing |
1/16″ |
| 59252X |
Delrin® Super Flangeless Nut |
1/16″ |
| 59255X |
PEEK Super Flangeless Nut |
1/16″ |
| 59259X |
Tefzel® Super Flangeless Ferrule with SS Lock Ring for 1/16″ OD Tubing |
1/16″ |
| 59350X |
PEEK Super Flangeless Ferrules with SS Lock Ring for 1/8″ OD Tubing |
1/8″ |
| 59359X |
Super Flangeless Ferrule with Custom SS Locking Nut |
1/8″ |
| 59360X |
PEEK One-Piece Ferrule for 1/8″ OD Tubing |
1/8″ |
| 97131X |
PEEK/Tefzel® Super Flangeless Fitting for 1/8″ OD Tubing |
5/16/2024 |
| 97137X |
Super Flangeless Fittings for 3/16″ OD Tubing |
3/16″ |
| 59603 |
Delrin® Union, 1/4-28, Natural1/4-28, union |
|
| 59620 |
Polypropylene Standard Union, 1/4-28 |
|
| 59623 |
Tefzel® Union, 1/4-28, Natural |
|
| 59630 |
Tefzel® ZDV Union Assembly for 1/16″ Tubing, 1/4-28 Threads |
|
| 59631 |
Tefzel® ZDV Union Assembly for 1/8″ Tubing, 1/4-28 Threads |
|
| 59632 |
Tefzel® Tee with .020″ Thru-Hole for 1/16″ OD Tubing |
|
| 59633 |
Tefzel® Tee with .050″ Thru-Hole for 1/8″ OD Tubing |
|
| 59634 |
Tefzel® Cross with .020″ Thru-Hole for 1/16″ OD Tubing |
|
| 59635 |
Tefzel® Cross with .050″ Thru-Hole for 1/8″ Tubing |
|
| 59702 |
PEEK Webbed Union Assembly with .020″ Thru-Hole for 1/16″ Tubing |
|
| 59703 |
PEEK Webbed Union Assembly with .050″ Thru-Hole for 1/8″ Tubing |
|
| 59712 |
PEEK Tee with .020″ Thru-Hole for 1/16″ OD Tubing |
|
| 59713 |
PEEK Tee with .050″ Thru-Hole for 1/8″ Tubing |
|
| 59722 |
PEEK Cross with .020″ Thru-Hole for 1/16″ OD Tubing |
|
| 59723 |
PEEK Cross with .050″ Thru-Hole for 1/8″ OD Tubing |
|
| 59455 |
1000 psi BPR Assembly with PEEK Holder and Fittings |
|
| 59465 |
Biocompatible PEEK BPR Holder with Fittings |
|
| 59761 |
40psi BPR Cartridge with Blue End Cap |
|
| 59762 |
75psi BPR Cartridge with Yellow End Cap |
|
| 59763 |
100psi BPR Cartridge with Red End Cap |
|
| 59764 |
250psi BPR Cartridge with Clear PP End Cap |
|
| 59765 |
500psi BPR Cartridge with Green End Cap |
|
| 59785 |
40psi BPR Assembly with PEEK Holder and Fittings |
|
| 59786 |
75psi BPR Assembly with PEEK Holder and Fittings |
|
| 59787 |
100 psi BPR Assembly with PEEK Holder and Fittings |
|
| 59788 |
250psi BPR Assembly with PEEK Holder and Fittings |
|
| 59789 |
500psi BPR Assembly with PEEK Holder and Fittings |
|
| 59790 |
5psi BPR Assembly with PEEK Holder and Fittings |
|
| 59791 |
20psi BPR Assembly with PEEK Holder and Fittings |
|
| 59795 |
750psi BPR Cartridge Black with Blue End Cap |
|
| 59796 |
1000psi BPR Cartridge with Black/Green End Cap |
|
| 64469 |
High Pressure SS BPR Holder with Fittings |
|
| 64605 |
40 psi BPR Assembly with SS Holder and Fittings |
|
| 64606 |
75 psi BPR Assembly with SS Holder and Fittings |
|
| 64607 |
100 psi BPR Assembly with SS Holder and Fittings |
|
| 64608 |
250 psi BPR Assembly with SS Holder and Fittings |
|
| 64609 |
500 psi BPR Assembly with SS Holder and Fittings |
|
| 64610 |
750 psi BPR Assembly with SS Holder and Fittings |
|
| 910-3000 |
Complete Inline Check Valve Assembly |
|
| 910-3001 |
Replacement Inline Check Valve Cartridge |
|
| 910-3301 |
Inlet Check Valve, 1/4-28 Male to 1/4-28 Female |
|
| 910-3302 |
Outlet Check Valve, 1/4-28 Male to 1/4-28 Female |
|
| 910-3315 |
Inlet Check Valve |
|
| 910-3316 |
Outlet Check Valve, 1/4-28 Male to 1/4-28 Female |
|
| 910-3320 |
Inlet Check Valve, 1/4-28 Male to 1/4-28 Female |
|
| 910-3340 |
Inlet/Outlet Check Valve, 10-32 Femaleto 10-32 Female |
|
| 59311 |
Tefzel® Plug for 1/4-28 Flat-Bottom Ports |
|
| 65100D |
4-Way Diagonal Flow Switching Valve |
|
| 65100L |
4 Port Right Angle Flow Switching Valve |
|
| 65100T |
4 Port 3-Way Flow Switching Valve |
|
| 59732 |
PEEK Shut-Off Valve with .020″ Thru-Hole for 1/16″ OD Tubing |
|
| 59733 |
PEEK Shut-Off Valve with .040″ Thru-Hole for 1/8″ OD Tubing |
|
| 59655 |
PEEK Quick Connect Luer Adapter – Male Luer to 1/4-28 Female, Red |
|
| 59696 |
Quick-Stop Luer Check Valve Assembly |
|
| 59697 |
Quick-Stop Luer Check Valve |
|
| 59653 |
PEEK Extra Long Adapter, M6 Female to 10-32 Male |
|
| 65011 |
PEEK Adapter, 10-32 Female to M6 Male |
|
| 59602 |
Delrin® Metric Webbed Union, Black |
|
| 59621 |
Teflon® Metric Adapter – 1/4-28 to M6 |
|
| 59622 |
ETFE Metric Webbed Union, .020″ |
|
| 59650 |
PEEK Adapter – M6 Female to 10-32 Male |
|
| 59670 |
Kel-F® Adapter – M6 Female to 1/4-28 Male |
|
| 59673 |
Kel-F® Adapter – 5/16-24 Female to M6 Male |
|
| 59724 |
Adapter – M6 Female to 5/16-24 Male |
|
| 57520 |
Micro Filter Assembly – .05µm PEEK Frit Inline, 0.5µL Void Volume |
|
| 57120X |
Inline MicroFilter End Fitting with 0.5µm PEEK Frit, Black |
|
| 57130X |
Inline MicroFilter End Fitting with 1.0µm SS Screen |
|
| 55112 |
PEEK Micro Ferrule for 1/32″ OD Tubing |
|
| 57121 |
PEEK 1µm Mini MicroFilter Capsule with SS Filter Screen |
|
| 57126 |
PEEK 1µm Capsule w/ Ti Frit for 57537 & 13-1138 |
|
| 57131 |
PEEK 1µm Mini MicroFilter Capsule with SS Filter Screen, for use with 13-1123 |
|
| 57133 |
PEEK 1µm Mini MicroFilter Capsule with SS Frit, for use with 13-1127 |
|
| 57134 |
PEEK 1µm Mini MicroFilter Capsule with Titanium Frit, for use with 13-1127 |
|
| 13-1122 |
Mini MicroFilter Assembly for Direct Connect Use of 1/32″ OD Tubing, 2µm SST Screen |
|
| 13-1123 |
Mini MicroFilter Assembly for Direct Connect Use of 1/32″ OD Tubing, 1µm SST Screen |
|
| 13-1127 |
Mini MicroFilter Assembly for Direct Connect Use of 1/32″ OD Tubing, 1µm SS Frit |
|
| 13-1128 |
Mini MicroFilter Assembly for Direct Connect Use of 1/32″ OD Tubing, 1µm Titanium Frit |
|
| 55172 |
PEEK Micro Ferrule for .025″ OD Tubing, Black |
|
| 57500 |
Micro Filter Assembly – 0.5µm SS Frit for Capillary Tubing |
|
| 57510 |
Micro Filter Assembly – 0.5µm PEEK Frit for Capillary Tubing |
|
| 57550 |
Micro Filter Assembly – 0.5µm SS Frit for 1/16″ OD Tubing |
|
| 57560 |
Micro Filter Assembly – 0.5µm PEEK for 1/16″ OD Tubing |
|
| 59416 |
PEEK Female Nut for Micro Tee/Cross, 5/16-24 |
|
| 52420X |
SS Micro Filter Frit – 2.0µm, .038″ x .031″ x .192″ |
|
| 52425X |
SS Micro Filter Frit – 0.5µm, .038″ x .028″ x .192″ |
|
