1ml Solid Phase Extraction Column，Luer-Inlet
货号：BS-SSPE-001
规格：20UNITS/BAG
品牌：biosharp
– Volume:1ml
– Polypropylene material
– Hydrophobic frits
– Luer-inlet designed for easy connection with solvent reservoirs and pumps
– Suitable for filtration and purification of various samples
| 货号 | BS-SSPE-001 |
| 规格 | 20UNITS/BAG |
| 品牌 | biosharp |
上海金畔生物科技有限公司提供肌酐酶 (≥100U/mg solid) ，欢迎访问官网了解更多产品信息。
| 产品编号 | D13084 |
| 英文名称 | Creatininase amidohydrolase |
| 中文名称 | 肌酐酶 (≥100U/mg solid) |
| 别 名 | CAH; Creatininase from microorganisms; EC 2.7.1.1; 肌酐酶（CAH）; 微生物产肌酐酶; 肌酐酶（EC 2.7.1.1）; |
| 保存条件 | Store at -20℃. |
| 注意事项 | This product as supplied is intended for research use only, not for use in human, therapeutic or diagnostic applications. |
| 产品介绍 | CAS号：9025-13-2 MDL：MFCD00130877 分子量：175 kDa 酶活性：100-300U/mg protein 外源活性：肌酸酶和尿素酶≤1% 外观性状：以蔗糖和牛血清白蛋白为稳定剂的冻干粉 等电点：4.7 最适pH：6.5-7.5 最佳温度：70℃ pH稳定性：pH 7.5-9.0（5°C，16小时） 热稳定性：低于70℃（pH 7.5，30分钟） 活性单位：在pH值为8.0和25°C时，每分钟一个单位将1.0 mmol的肌酐水解为肌酸。 概述：假单胞菌肌酐酶是一种单亚单位分子量为28.4kda的同六聚体酶。它是一种环氨基水解酶，催化肌酐向肌酸的可逆转化。每个单体在β链的C端和主α螺旋的N端附近都含有双核锌中心。这些锌离子指示了活性中心的位置。 用途：用于生化研究。微生物产肌酐酶可与其他酶共固定化制备安培生物传感器，用于测定肌酐。该酶与肌酸酰胺水解酶、肌氨酸脱氢酶或肌氨酸氧化酶、甲醛脱氢酶联用时，可用于肌酐的酶法测定。 |
上海金畔生物科技有限公司代理加拿大Silicycle硅胶填料色谱柱层析板金属离子清除剂全线产品，欢迎访问官网了解更多产品信息和订购。
Plunger for 10 mL Solid-Load Cartridges (16 mm)
| Particle Shape | Irregular |
|---|---|
| Family / Formats | SiliaSep™ (Flash Cartridges) |
上海金畔生物科技有限公司代理加拿大Silicycle硅胶填料色谱柱层析板金属离子清除剂全线产品，欢迎访问官网了解更多产品信息和订购。
SiliaSep Empty Solid-Load Cartridges, 10 mL, 100/box (SPL-0009-010)
Empty Luer-Lock (with 2 frits) cartridges are designed to be used with SiliaSep cartridges for sample loading.
The use of solid-load technique (also called dry-load) will improve chromatography resolution, especially for compounds soluble only in strong solvents or in large volumes of solvents.
For silica-sample slurry, dry by evaporating the solvent for a more concentrated sample and to eliminate any solvent effect on the purification.
For a dry sample slurry, use a 1:1 ratio (1 g of silica for 1 g of dry sample) but for an oily sample prefer a 3:1 ratio (3 g of silica for 1 g of oily sample).
| Particle Shape | Irregular |
|---|---|
| Family / Formats | SiliaSep™ (Flash Cartridges) |
| Quantity | 100/box |
| Endcapping | Endcapped |
上海金畔生物科技有限公司代理加拿大Silicycle硅胶填料色谱柱层析板金属离子清除剂全线产品，欢迎访问官网了解更多产品信息和订购。
SiliaSep Empty Solid-Load Cartridges, 150 mL, 12/box (AUT-0090-150)
Empty Luer-Lock (with 2 frits) cartridges are designed to be used with SiliaSep cartridges for sample loading.
The use of solid-load technique (also called dry-load) will improve chromatography resolution, especially for compounds soluble only in strong solvents or in large volumes of solvents.
For silica-sample slurry, dry by evaporating the solvent for a more concentrated sample and to eliminate any solvent effect on the purification.
For a dry sample slurry, use a 1:1 ratio (1 g of silica for 1 g of dry sample) but for an oily sample prefer a 3:1 ratio (3 g of silica for 1 g of oily sample).
| Particle Shape | Irregular |
|---|---|
| Family / Formats | SiliaSep™ (Flash Cartridges) |
| Quantity | 12/box |